From 5ea392d43bd15c652aac01750ed363c7d3d144e4 Mon Sep 17 00:00:00 2001 From: Jagan Teki <jteki@openedev.com> Date: Fri, 23 Oct 2015 01:39:31 +0530 Subject: [PATCH] spi: xilinx_spi: Use BIT macro Replace numerical bit shift with BIT macro in xilinx_spi :%s/(1 << nr)/BIT(nr)/g where nr = 0, 1, 2 .... 31 Cc: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jteki@openedev.com> --- drivers/spi/xilinx_spi.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index 8ccc5780c9..76201630e5 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -32,24 +32,24 @@ */ /* SPI Control Register (spicr), [1] p9, [2] p8 */ -#define SPICR_LSB_FIRST (1 << 9) -#define SPICR_MASTER_INHIBIT (1 << 8) -#define SPICR_MANUAL_SS (1 << 7) -#define SPICR_RXFIFO_RESEST (1 << 6) -#define SPICR_TXFIFO_RESEST (1 << 5) -#define SPICR_CPHA (1 << 4) -#define SPICR_CPOL (1 << 3) -#define SPICR_MASTER_MODE (1 << 2) -#define SPICR_SPE (1 << 1) -#define SPICR_LOOP (1 << 0) +#define SPICR_LSB_FIRST BIT(9) +#define SPICR_MASTER_INHIBIT BIT(8) +#define SPICR_MANUAL_SS BIT(7) +#define SPICR_RXFIFO_RESEST BIT(6) +#define SPICR_TXFIFO_RESEST BIT(5) +#define SPICR_CPHA BIT(4) +#define SPICR_CPOL BIT(3) +#define SPICR_MASTER_MODE BIT(2) +#define SPICR_SPE BIT(1) +#define SPICR_LOOP BIT(0) /* SPI Status Register (spisr), [1] p11, [2] p10 */ -#define SPISR_SLAVE_MODE_SELECT (1 << 5) -#define SPISR_MODF (1 << 4) -#define SPISR_TX_FULL (1 << 3) -#define SPISR_TX_EMPTY (1 << 2) -#define SPISR_RX_FULL (1 << 1) -#define SPISR_RX_EMPTY (1 << 0) +#define SPISR_SLAVE_MODE_SELECT BIT(5) +#define SPISR_MODF BIT(4) +#define SPISR_TX_FULL BIT(3) +#define SPISR_TX_EMPTY BIT(2) +#define SPISR_RX_FULL BIT(1) +#define SPISR_RX_EMPTY BIT(0) /* SPI Data Transmit Register (spidtr), [1] p12, [2] p12 */ #define SPIDTR_8BIT_MASK (0xff << 0) -- 2.39.5