From: Andre Przywara Date: Thu, 7 Dec 2023 16:06:51 +0000 (+0000) Subject: sunxi: sun4i: make more clock functions SPL only X-Git-Url: http://git.dujemihanovic.xyz/img/html/static/gitweb.css?a=commitdiff_plain;h=a2b2a47a16489e96e251fe2b0fab2ac9798be02f;p=u-boot.git sunxi: sun4i: make more clock functions SPL only In clock_sun4i.c, responsible for (mostly early) clock setup on early generation Allwinner SoCs, many functions are only needed by the SPL, and are thus already guarded by CONFIG_SPL_BUILD. Over the years drivers like for the UART or I2C were converted to DM, so they care about clock setup themselves now, by using a proper DM clock driver. This means those devices need the clock setup functions here for the SPL only. Include those functions into the existing CONFIG_SPL_BUILD guards, so they are compiled for the SPL only. This avoids unnecessary code in U-Boot proper and helps further refactoring. Add some comments on the way to help understanding of the file. Signed-off-by: Andre Przywara --- diff --git a/arch/arm/mach-sunxi/clock_sun4i.c b/arch/arm/mach-sunxi/clock_sun4i.c index ac3b7a801f..6458d066f7 100644 --- a/arch/arm/mach-sunxi/clock_sun4i.c +++ b/arch/arm/mach-sunxi/clock_sun4i.c @@ -43,7 +43,6 @@ void clock_init_safe(void) setbits_le32(&ccm->pll6_cfg, 0x1 << CCM_PLL6_CTRL_SATA_EN_SHIFT); #endif } -#endif void clock_init_uart(void) { @@ -77,7 +76,6 @@ int clock_twi_onoff(int port, int state) return 0; } -#ifdef CONFIG_SPL_BUILD #define PLL1_CFG(N, K, M, P) ( 1 << CCM_PLL1_CFG_ENABLE_SHIFT | \ 0 << CCM_PLL1_CFG_VCO_RST_SHIFT | \ 8 << CCM_PLL1_CFG_VCO_BIAS_SHIFT | \ @@ -177,8 +175,9 @@ void clock_set_pll1(unsigned int hz) &ccm->cpu_ahb_apb0_cfg); sdelay(20); } -#endif +#endif /* CONFIG_SPL_BUILD */ +/* video, DRAM, PLL_PERIPH clocks */ void clock_set_pll3(unsigned int clk) { struct sunxi_ccm_reg * const ccm =