From: Svyatoslav Ryhel Date: Wed, 31 Jan 2024 06:57:21 +0000 (+0200) Subject: video: renesas: shift the init sequence by one step earlier X-Git-Url: http://git.dujemihanovic.xyz/img/html/static/gitweb.css?a=commitdiff_plain;h=9970634f83f313e5eac18a77f740a89d9f83a712;p=u-boot.git video: renesas: shift the init sequence by one step earlier Shift all setup stages one step earlier to better fit the existing uclass. Signed-off-by: Svyatoslav Ryhel --- diff --git a/drivers/video/renesas-r61307.c b/drivers/video/renesas-r61307.c index 426fdc6224..1eccaf6b1b 100644 --- a/drivers/video/renesas-r61307.c +++ b/drivers/video/renesas-r61307.c @@ -118,42 +118,6 @@ static struct display_timing default_timing = { }; static int renesas_r61307_enable_backlight(struct udevice *dev) -{ - struct renesas_r61307_priv *priv = dev_get_priv(dev); - int ret; - - ret = regulator_set_enable_if_allowed(priv->vcc, 1); - if (ret) { - log_err("enabling vcc-supply failed (%d)\n", ret); - return ret; - } - mdelay(5); - - ret = regulator_set_enable_if_allowed(priv->iovcc, 1); - if (ret) { - log_err("enabling iovcc-supply failed (%d)\n", ret); - return ret; - } - - ret = dm_gpio_set_value(&priv->reset_gpio, 0); - if (ret) { - log_err("changing reset-gpio failed (%d)\n", ret); - return ret; - } - mdelay(5); - - ret = dm_gpio_set_value(&priv->reset_gpio, 1); - if (ret) { - log_err("changing reset-gpio failed (%d)\n", ret); - return ret; - } - - mdelay(5); - - return 0; -} - -static int renesas_r61307_set_backlight(struct udevice *dev, int percent) { struct renesas_r61307_priv *priv = dev_get_priv(dev); struct mipi_dsi_panel_plat *plat = dev_get_plat(dev); @@ -205,18 +169,23 @@ static int renesas_r61307_set_backlight(struct udevice *dev, int percent) log_err("failed to set display on: %d\n", ret); return ret; } - mdelay(50); + return 0; +} + +static int renesas_r61307_set_backlight(struct udevice *dev, int percent) +{ + struct renesas_r61307_priv *priv = dev_get_priv(dev); + int ret; + ret = backlight_enable(priv->backlight); if (ret) return ret; - ret = backlight_set_brightness(priv->backlight, percent); - if (ret) - return ret; + mdelay(5); - return 0; + return backlight_set_brightness(priv->backlight, percent); } static int renesas_r61307_timings(struct udevice *dev, @@ -266,6 +235,46 @@ static int renesas_r61307_of_to_plat(struct udevice *dev) return 0; } +static int renesas_r61307_hw_init(struct udevice *dev) +{ + struct renesas_r61307_priv *priv = dev_get_priv(dev); + int ret; + + ret = regulator_set_enable_if_allowed(priv->vcc, 1); + if (ret) { + log_debug("%s: enabling vcc-supply failed (%d)\n", + __func__, ret); + return ret; + } + mdelay(5); + + ret = regulator_set_enable_if_allowed(priv->iovcc, 1); + if (ret) { + log_debug("%s: enabling iovcc-supply failed (%d)\n", + __func__, ret); + return ret; + } + + ret = dm_gpio_set_value(&priv->reset_gpio, 0); + if (ret) { + log_debug("%s: changing reset-gpio failed (%d)\n", + __func__, ret); + return ret; + } + mdelay(5); + + ret = dm_gpio_set_value(&priv->reset_gpio, 1); + if (ret) { + log_debug("%s: changing reset-gpio failed (%d)\n", + __func__, ret); + return ret; + } + + mdelay(5); + + return 0; +} + static int renesas_r61307_probe(struct udevice *dev) { struct mipi_dsi_panel_plat *plat = dev_get_plat(dev); @@ -275,7 +284,7 @@ static int renesas_r61307_probe(struct udevice *dev) plat->format = MIPI_DSI_FMT_RGB888; plat->mode_flags = MIPI_DSI_MODE_VIDEO; - return 0; + return renesas_r61307_hw_init(dev); } static const struct panel_ops renesas_r61307_ops = { diff --git a/drivers/video/renesas-r69328.c b/drivers/video/renesas-r69328.c index d2f7169468..ecf89ec021 100644 --- a/drivers/video/renesas-r69328.c +++ b/drivers/video/renesas-r69328.c @@ -65,37 +65,6 @@ static struct display_timing default_timing = { static int renesas_r69328_enable_backlight(struct udevice *dev) { - struct renesas_r69328_priv *priv = dev_get_priv(dev); - int ret; - - ret = dm_gpio_set_value(&priv->enable_gpio, 1); - if (ret) { - log_err("error changing enable-gpios (%d)\n", ret); - return ret; - } - mdelay(5); - - ret = dm_gpio_set_value(&priv->reset_gpio, 0); - if (ret) { - log_err("error changing reset-gpios (%d)\n", ret); - return ret; - } - mdelay(5); - - ret = dm_gpio_set_value(&priv->reset_gpio, 1); - if (ret) { - log_err("error changing reset-gpios (%d)\n", ret); - return ret; - } - - mdelay(5); - - return 0; -} - -static int renesas_r69328_set_backlight(struct udevice *dev, int percent) -{ - struct renesas_r69328_priv *priv = dev_get_priv(dev); struct mipi_dsi_panel_plat *plat = dev_get_plat(dev); struct mipi_dsi_device *dsi = plat->device; int ret; @@ -153,18 +122,23 @@ static int renesas_r69328_set_backlight(struct udevice *dev, int percent) log_err("failed to set display on: %d\n", ret); return ret; } - mdelay(50); + return 0; +} + +static int renesas_r69328_set_backlight(struct udevice *dev, int percent) +{ + struct renesas_r69328_priv *priv = dev_get_priv(dev); + int ret; + ret = backlight_enable(priv->backlight); if (ret) return ret; - ret = backlight_set_brightness(priv->backlight, percent); - if (ret) - return ret; + mdelay(5); - return 0; + return backlight_set_brightness(priv->backlight, percent); } static int renesas_r69328_timings(struct udevice *dev, @@ -203,6 +177,39 @@ static int renesas_r69328_of_to_plat(struct udevice *dev) return 0; } +static int renesas_r69328_hw_init(struct udevice *dev) +{ + struct renesas_r69328_priv *priv = dev_get_priv(dev); + int ret; + + ret = dm_gpio_set_value(&priv->enable_gpio, 1); + if (ret) { + log_debug("%s: error changing enable-gpios (%d)\n", + __func__, ret); + return ret; + } + mdelay(5); + + ret = dm_gpio_set_value(&priv->reset_gpio, 0); + if (ret) { + log_debug("%s: error changing reset-gpios (%d)\n", + __func__, ret); + return ret; + } + mdelay(5); + + ret = dm_gpio_set_value(&priv->reset_gpio, 1); + if (ret) { + log_debug("%s: error changing reset-gpios (%d)\n", + __func__, ret); + return ret; + } + + mdelay(5); + + return 0; +} + static int renesas_r69328_probe(struct udevice *dev) { struct mipi_dsi_panel_plat *plat = dev_get_plat(dev); @@ -212,7 +219,7 @@ static int renesas_r69328_probe(struct udevice *dev) plat->format = MIPI_DSI_FMT_RGB888; plat->mode_flags = MIPI_DSI_MODE_VIDEO; - return 0; + return renesas_r69328_hw_init(dev); } static const struct panel_ops renesas_r69328_ops = {