From: Claudius Heine <ch@denx.de>
Date: Tue, 29 Oct 2019 12:17:55 +0000 (+0100)
Subject: ARM: imx6: DHCOM i.MX6 PDK: fix board_boot_modes emmc entry
X-Git-Tag: v2025.01-rc5-pxa1908~2713^2~35
X-Git-Url: http://git.dujemihanovic.xyz/img/html/static/gitweb.css?a=commitdiff_plain;h=5331fadbfc19e8786e7710f1a9858ac47b4ffda8;p=u-boot.git

ARM: imx6: DHCOM i.MX6 PDK: fix board_boot_modes emmc entry

The board_boot_modes contained the wrong values for the emmc entry.

The eMMC here is connected over a 8-bit bus.

This change allows to use the 'bmode emmc' command to boot from emmc.

Signed-off-by: Claudius Heine <ch@denx.de>
---

diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c
index 2d0f78da11..8dc4b80872 100644
--- a/board/dhelectronics/dh_imx6/dh_imx6.c
+++ b/board/dhelectronics/dh_imx6/dh_imx6.c
@@ -197,7 +197,7 @@ static const struct boot_mode board_boot_modes[] = {
 	{"sd2",	 MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
 	{"sd3",	 MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
 	/* 8 bit bus width */
-	{"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
+	{"emmc", MAKE_CFGVAL(0x60, 0x58, 0x00, 0x00)},
 	{NULL,	 0},
 };
 #endif