From e1a2a3401956f546ac18cdc58716860286868425 Mon Sep 17 00:00:00 2001 From: Shengzhou Liu <Shengzhou.Liu@freescale.com> Date: Tue, 13 Aug 2013 16:41:19 +0800 Subject: [PATCH] powerpc/p1010rdb: fix calculating ddr_freq_mhz There was a bug for calculating ddr_freq_mhz, it should be divided by 1000000 rather than 0x1000000. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Acked-by: York Sun <yorksun@freescale.com> --- board/freescale/p1010rdb/spl_minimal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/freescale/p1010rdb/spl_minimal.c b/board/freescale/p1010rdb/spl_minimal.c index 73289f3656..d0e712eb30 100644 --- a/board/freescale/p1010rdb/spl_minimal.c +++ b/board/freescale/p1010rdb/spl_minimal.c @@ -26,7 +26,7 @@ void sdram_init(void) ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO; ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; - ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 0x1000000; + ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 1000000; /* mask off E bit */ u32 svr = SVR_SOC_VER(mfspr(SPRN_SVR)); -- 2.39.5