From c63254ef5628efe1c77cb2fdba20753f9666f55d Mon Sep 17 00:00:00 2001
From: Sergey Lapin <slapin@ossfans.org>
Date: Tue, 12 May 2009 12:25:14 +0400
Subject: [PATCH] AFEB9260 network fix
AFEB9260 uses PA10, PA11 for ETX2 and ETX3.
Also, due to extarnal pull-up on IRQ line, Micrel PHY ID is 1 after reset sequence,
not 0.
Signed-off-by: Sergey Lapin <slapin@ossfans.org>
---
board/afeb9260/afeb9260.c | 2 +-
cpu/arm926ejs/at91/at91sam9260_macb.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c
index 024db2bbe0..a247663bb4 100644
--- a/board/afeb9260/afeb9260.c
+++ b/board/afeb9260/afeb9260.c
@@ -177,7 +177,7 @@ int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
+ rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x01);
#endif
return rc;
}
diff --git a/cpu/arm926ejs/at91/at91sam9260_macb.c b/cpu/arm926ejs/at91/at91sam9260_macb.c
index ab60fb7d9b..ea5e767ebe 100644
--- a/cpu/arm926ejs/at91/at91sam9260_macb.c
+++ b/cpu/arm926ejs/at91/at91sam9260_macb.c
@@ -47,7 +47,7 @@ void at91_macb_hw_init(void)
at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
-#if defined(CONFIG_AT91SAM9260EK)
+#if defined(CONFIG_AT91SAM9260EK) || defined(CONFIG_AFEB9260)
/*
* use PA10, PA11 for ETX2, ETX3.
* PA23 and PA24 are for TWI EEPROM
--
2.39.5