From 6115f1c4fe81015369e110ea9830a6e36710677c Mon Sep 17 00:00:00 2001
From: Tom Rini <trini@konsulko.com>
Date: Wed, 22 Sep 2021 14:50:39 -0400
Subject: [PATCH] Convert CONFIG_NAND_OMAP_ECCSCHEME to Kconfig
The values of CONFIG_NAND_OMAP_ECCSCHEME map to the enum in
include/linux/mtd/omap_gpmc.h for valid ECC schemes. Make which one we
will use be a choice statement, enumerating the ones which we have
implemented.
Signed-off-by: Tom Rini <trini@konsulko.com>
---
configs/am335x_guardian_defconfig | 1 +
configs/am3517_evm_defconfig | 1 +
configs/am43xx_evm_defconfig | 1 +
configs/am43xx_evm_rtconly_defconfig | 1 +
configs/am43xx_evm_usbhost_boot_defconfig | 1 +
configs/am43xx_hs_evm_defconfig | 1 +
configs/devkit8000_defconfig | 1 +
configs/etamin_defconfig | 1 +
configs/igep00x0_defconfig | 1 +
configs/omap35_logic_defconfig | 1 +
configs/omap35_logic_somlv_defconfig | 1 +
configs/omap3_beagle_defconfig | 1 +
configs/omap3_evm_defconfig | 1 +
configs/omap3_logic_defconfig | 1 +
configs/omap3_logic_somlv_defconfig | 1 +
doc/README.nand | 66 --------------
drivers/mtd/nand/raw/Kconfig | 103 +++++++++++++++++++++-
include/configs/am335x_evm.h | 1 -
include/configs/am335x_guardian.h | 1 -
include/configs/am335x_igep003x.h | 1 -
include/configs/am3517_evm.h | 1 -
include/configs/am43xx_evm.h | 1 -
include/configs/baltos.h | 1 -
include/configs/brppt1.h | 1 -
include/configs/chiliboard.h | 1 -
include/configs/cm_t43.h | 1 -
include/configs/devkit8000.h | 1 -
include/configs/dra7xx_evm.h | 1 -
include/configs/etamin.h | 2 -
include/configs/omap3_beagle.h | 1 -
include/configs/omap3_evm.h | 1 -
include/configs/omap3_igep00x0.h | 1 -
include/configs/omap3_logic.h | 1 -
include/configs/phycore_am335x_r2.h | 1 -
include/configs/siemens-am33x-common.h | 1 -
include/configs/tam3517-common.h | 1 -
include/configs/ti816x_evm.h | 1 -
37 files changed, 116 insertions(+), 89 deletions(-)
diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig
index 272d5b8775..ea4032fe1f 100644
--- a/configs/am335x_guardian_defconfig
+++ b/configs/am335x_guardian_defconfig
@@ -88,6 +88,7 @@ CONFIG_MISC=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x40000
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_SYS_NAND_PAGE_COUNT=0x40
diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
index fa3c22995c..1bdebf5b7f 100644
--- a/configs/am3517_evm_defconfig
+++ b/configs/am3517_evm_defconfig
@@ -57,6 +57,7 @@ CONFIG_DM_PCA953X=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig
index 98cd6b4dcd..108db834c4 100644
--- a/configs/am43xx_evm_defconfig
+++ b/configs/am43xx_evm_defconfig
@@ -60,6 +60,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x40000
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_SYS_NAND_PAGE_COUNT=0x40
diff --git a/configs/am43xx_evm_rtconly_defconfig b/configs/am43xx_evm_rtconly_defconfig
index 2ec0762ccf..f558fd503a 100644
--- a/configs/am43xx_evm_rtconly_defconfig
+++ b/configs/am43xx_evm_rtconly_defconfig
@@ -47,6 +47,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x40000
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_SYS_NAND_PAGE_COUNT=0x40
diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig
index c08e0b6bab..0b91f3a5f0 100644
--- a/configs/am43xx_evm_usbhost_boot_defconfig
+++ b/configs/am43xx_evm_usbhost_boot_defconfig
@@ -63,6 +63,7 @@ CONFIG_MISC=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x40000
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_SYS_NAND_PAGE_COUNT=0x40
diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig
index 26c1b594de..efa6cd0465 100644
--- a/configs/am43xx_hs_evm_defconfig
+++ b/configs/am43xx_hs_evm_defconfig
@@ -65,6 +65,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x40000
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_SYS_NAND_PAGE_COUNT=0x40
diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig
index 1c067fd7df..ccdd4f606f 100644
--- a/configs/devkit8000_defconfig
+++ b/configs/devkit8000_defconfig
@@ -41,6 +41,7 @@ CONFIG_TWL4030_LED=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_HAM1_CODE_HW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig
index 65bdcf6bf7..59a919bece 100644
--- a/configs/etamin_defconfig
+++ b/configs/etamin_defconfig
@@ -85,6 +85,7 @@ CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x80000
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_SYS_NAND_PAGE_COUNT=0x80
diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig
index 17e793c313..8f6e13e2a8 100644
--- a/configs/igep00x0_defconfig
+++ b/configs/igep00x0_defconfig
@@ -60,6 +60,7 @@ CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_SYS_MTDPARTS_RUNTIME=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig
index fe37a981e4..9d8ac94d2a 100644
--- a/configs/omap35_logic_defconfig
+++ b/configs/omap35_logic_defconfig
@@ -57,6 +57,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig
index 29d10638a1..ee0c58ad2b 100644
--- a/configs/omap35_logic_somlv_defconfig
+++ b/configs/omap35_logic_somlv_defconfig
@@ -62,6 +62,7 @@ CONFIG_FLASH_CFI_MTD=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig
index 46a792fe8a..80e2cc616c 100644
--- a/configs/omap3_beagle_defconfig
+++ b/configs/omap3_beagle_defconfig
@@ -74,6 +74,7 @@ CONFIG_TWL4030_LED=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_HAM1_CODE_HW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig
index 0174b3a669..b89ab392d0 100644
--- a/configs/omap3_evm_defconfig
+++ b/configs/omap3_evm_defconfig
@@ -62,6 +62,7 @@ CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
index 18e87f125c..becf862dcb 100644
--- a/configs/omap3_logic_defconfig
+++ b/configs/omap3_logic_defconfig
@@ -57,6 +57,7 @@ CONFIG_MMC_OMAP_HS=y
CONFIG_MMC_OMAP36XX_PINS=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig
index f7470c1a40..ece92fef61 100644
--- a/configs/omap3_logic_somlv_defconfig
+++ b/configs/omap3_logic_somlv_defconfig
@@ -63,6 +63,7 @@ CONFIG_FLASH_CFI_MTD=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
diff --git a/doc/README.nand b/doc/README.nand
index f6460dba60..ffcea90799 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -200,72 +200,6 @@ Platform specific options
so those platforms should use CONFIG_SPL_NAND_SIMPLE for enabling
SPL-NAND driver with software ECC correction support.
- CONFIG_NAND_OMAP_ECCSCHEME
- On OMAP platforms, this CONFIG specifies NAND ECC scheme.
- It can take following values:
- OMAP_ECC_HAM1_CODE_SW
- 1-bit Hamming code using software lib.
- (for legacy devices only)
- OMAP_ECC_HAM1_CODE_HW
- 1-bit Hamming code using GPMC hardware.
- (for legacy devices only)
- OMAP_ECC_BCH4_CODE_HW_DETECTION_SW
- 4-bit BCH code (unsupported)
- OMAP_ECC_BCH4_CODE_HW
- 4-bit BCH code (unsupported)
- OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
- 8-bit BCH code with
- - ecc calculation using GPMC hardware engine,
- - error detection using software library.
- - requires CONFIG_BCH to enable software BCH library
- (For legacy device which do not have ELM h/w engine)
- OMAP_ECC_BCH8_CODE_HW
- 8-bit BCH code with
- - ecc calculation using GPMC hardware engine,
- - error detection using ELM hardware engine.
- OMAP_ECC_BCH16_CODE_HW
- 16-bit BCH code with
- - ecc calculation using GPMC hardware engine,
- - error detection using ELM hardware engine.
-
- How to select ECC scheme on OMAP and AMxx platforms ?
- -----------------------------------------------------
- Though higher ECC schemes have more capability to detect and correct
- bit-flips, but still selection of ECC scheme is dependent on following
- - hardware engines present in SoC.
- Some legacy OMAP SoC do not have ELM h/w engine thus such
- SoC cannot support BCHx_HW ECC schemes.
- - size of OOB/Spare region
- With higher ECC schemes, more OOB/Spare area is required to
- store ECC. So choice of ECC scheme is limited by NAND oobsize.
-
- In general following expression can help:
- NAND_OOBSIZE >= 2 + (NAND_PAGESIZE / 512) * ECC_BYTES
- where
- NAND_OOBSIZE = number of bytes available in
- OOB/spare area per NAND page.
- NAND_PAGESIZE = bytes in main-area of NAND page.
- ECC_BYTES = number of ECC bytes generated to
- protect 512 bytes of data, which is:
- 3 for HAM1_xx ecc schemes
- 7 for BCH4_xx ecc schemes
- 14 for BCH8_xx ecc schemes
- 26 for BCH16_xx ecc schemes
-
- example to check for BCH16 on 2K page NAND
- NAND_PAGESIZE = 2048
- NAND_OOBSIZE = 64
- 2 + (2048 / 512) * 26 = 106 > NAND_OOBSIZE
- Thus BCH16 cannot be supported on 2K page NAND.
-
- However, for 4K pagesize NAND
- NAND_PAGESIZE = 4096
- NAND_OOBSIZE = 224
- ECC_BYTES = 26
- 2 + (4096 / 512) * 26 = 210 < NAND_OOBSIZE
- Thus BCH16 can be supported on 4K page NAND.
-
-
CONFIG_NAND_OMAP_GPMC_PREFETCH
On OMAP platforms that use the GPMC controller
(CONFIG_NAND_OMAP_GPMC_PREFETCH), this options enables the code that
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 2e6fe14ab3..790ee34403 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -156,9 +156,10 @@ config NAND_OMAP_GPMC
do ECC calculation (not ECC error detection) for HAM1, BCH4, BCH8
and BCH16 ECC algorithms.
+if NAND_OMAP_GPMC
+
config NAND_OMAP_GPMC_PREFETCH
bool "Enable GPMC Prefetch"
- depends on NAND_OMAP_GPMC
default y
help
On OMAP platforms that use the GPMC controller
@@ -167,7 +168,7 @@ config NAND_OMAP_GPMC_PREFETCH
config NAND_OMAP_ELM
bool "Enable ELM driver for OMAPxx and AMxx platforms."
- depends on NAND_OMAP_GPMC && !OMAP34XX
+ depends on !OMAP34XX
help
ELM controller is used for ECC error detection (not ECC calculation)
of BCH4, BCH8 and BCH16 ECC algorithms.
@@ -176,6 +177,104 @@ config NAND_OMAP_ELM
detection. However ECC calculation on such plaforms would still be
done by GPMC controller.
+choice
+ prompt "ECC scheme"
+ default NAND_OMAP_ECCSCHEME_BCH8_CODE_HW
+ help
+ On OMAP platforms, this CONFIG specifies NAND ECC scheme.
+ It can take following values:
+ OMAP_ECC_HAM1_CODE_SW
+ 1-bit Hamming code using software lib.
+ (for legacy devices only)
+ OMAP_ECC_HAM1_CODE_HW
+ 1-bit Hamming code using GPMC hardware.
+ (for legacy devices only)
+ OMAP_ECC_BCH4_CODE_HW_DETECTION_SW
+ 4-bit BCH code (unsupported)
+ OMAP_ECC_BCH4_CODE_HW
+ 4-bit BCH code (unsupported)
+ OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
+ 8-bit BCH code with
+ - ecc calculation using GPMC hardware engine,
+ - error detection using software library.
+ - requires CONFIG_BCH to enable software BCH library
+ (For legacy device which do not have ELM h/w engine)
+ OMAP_ECC_BCH8_CODE_HW
+ 8-bit BCH code with
+ - ecc calculation using GPMC hardware engine,
+ - error detection using ELM hardware engine.
+ OMAP_ECC_BCH16_CODE_HW
+ 16-bit BCH code with
+ - ecc calculation using GPMC hardware engine,
+ - error detection using ELM hardware engine.
+
+ How to select ECC scheme on OMAP and AMxx platforms ?
+ -----------------------------------------------------
+ Though higher ECC schemes have more capability to detect and correct
+ bit-flips, but still selection of ECC scheme is dependent on following
+ - hardware engines present in SoC.
+ Some legacy OMAP SoC do not have ELM h/w engine thus such
+ SoC cannot support BCHx_HW ECC schemes.
+ - size of OOB/Spare region
+ With higher ECC schemes, more OOB/Spare area is required to
+ store ECC. So choice of ECC scheme is limited by NAND oobsize.
+
+ In general following expression can help:
+ NAND_OOBSIZE >= 2 + (NAND_PAGESIZE / 512) * ECC_BYTES
+ where
+ NAND_OOBSIZE = number of bytes available in
+ OOB/spare area per NAND page.
+ NAND_PAGESIZE = bytes in main-area of NAND page.
+ ECC_BYTES = number of ECC bytes generated to
+ protect 512 bytes of data, which is:
+ 3 for HAM1_xx ecc schemes
+ 7 for BCH4_xx ecc schemes
+ 14 for BCH8_xx ecc schemes
+ 26 for BCH16_xx ecc schemes
+
+ example to check for BCH16 on 2K page NAND
+ NAND_PAGESIZE = 2048
+ NAND_OOBSIZE = 64
+ 2 + (2048 / 512) * 26 = 106 > NAND_OOBSIZE
+ Thus BCH16 cannot be supported on 2K page NAND.
+
+ However, for 4K pagesize NAND
+ NAND_PAGESIZE = 4096
+ NAND_OOBSIZE = 224
+ ECC_BYTES = 26
+ 2 + (4096 / 512) * 26 = 210 < NAND_OOBSIZE
+ Thus BCH16 can be supported on 4K page NAND.
+
+config NAND_OMAP_ECCSCHEME_HAM1_CODE_SW
+ bool "1-bit Hamming code using software lib"
+
+config NAND_OMAP_ECCSCHEME_HAM1_CODE_HW
+ bool "1-bit Hamming code using GPMC hardware"
+
+config NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW
+ bool "8-bit BCH code with HW calculation SW error detection"
+
+config NAND_OMAP_ECCSCHEME_BCH8_CODE_HW
+ bool "8-bit BCH code with HW calculation and error detection"
+
+config NAND_OMAP_ECCSCHEME_BCH16_CODE_HW
+ bool "16-bit BCH code with HW calculation and error detection"
+
+endchoice
+
+config NAND_OMAP_ECCSCHEME
+ int
+ default 1 if NAND_OMAP_ECCSCHEME_HAM1_CODE_SW
+ default 2 if NAND_OMAP_ECCSCHEME_HAM1_CODE_HW
+ default 5 if NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW
+ default 6 if NAND_OMAP_ECCSCHEME_BCH8_CODE_HW
+ default 7 if NAND_OMAP_ECCSCHEME_BCH16_CODE_HW
+ help
+ This must be kept in sync with the enum in
+ include/linux/mtd/omap_gpmc.h
+
+endif
+
config NAND_VF610_NFC
bool "Support for Freescale NFC for VF610"
select SYS_NAND_SELF_INIT
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index dc8c3e2a5d..7fb1b3a3e3 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -191,7 +191,6 @@
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
/* NAND: SPL related configs */
#ifdef CONFIG_SPL_OS_BOOT
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h
index fd7d589dd6..68b4e4f590 100644
--- a/include/configs/am335x_guardian.h
+++ b/include/configs/am335x_guardian.h
@@ -130,7 +130,6 @@
}
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 26
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
#define MTDIDS_DEFAULT "nand0=nand.0"
#endif /* CONFIG_MTD_RAW_NAND */
diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h
index 4a303b702c..339a975c74 100644
--- a/include/configs/am335x_igep003x.h
+++ b/include/configs/am335x_igep003x.h
@@ -115,6 +115,5 @@
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
#endif /* ! __CONFIG_IGEP003X_H */
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 3b70741953..bf01a777cc 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -28,7 +28,6 @@
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 13
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
#define CONFIG_SYS_NAND_MAX_OOBFREE 2
#define CONFIG_SYS_NAND_MAX_ECCPOS 56
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 5b7418b9ff..7bea61ec15 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -158,7 +158,6 @@
#ifdef CONFIG_MTD_RAW_NAND
/* NAND: device related configs */
/* NAND: driver related configs */
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \
20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \
diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index f55f57ce22..32f2174641 100644
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -219,7 +219,6 @@
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#endif
#endif
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index caedd3004b..4c56a8a59b 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -144,7 +144,6 @@ NANDTGTS \
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x8000000
/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
index c7b2131c26..49a8d71031 100644
--- a/include/configs/chiliboard.h
+++ b/include/configs/chiliboard.h
@@ -134,7 +134,6 @@
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
/* NAND: SPL related configs */
/* USB configuration */
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index 49916c98a7..e250dc92dd 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -24,7 +24,6 @@
/* NAND support */
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 8113d759cf..591a33fca6 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -138,7 +138,6 @@
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 3
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 11ef07ce64..c54f375689 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -81,7 +81,6 @@
#ifdef CONFIG_MTD_RAW_NAND
/* NAND: device related configs */
/* NAND: driver related configs */
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
diff --git a/include/configs/etamin.h b/include/configs/etamin.h
index 20a8e2657a..3ff86eed83 100644
--- a/include/configs/etamin.h
+++ b/include/configs/etamin.h
@@ -16,8 +16,6 @@
/* NAND specific changes for etamin due to different page size */
#undef CONFIG_SYS_NAND_ECCPOS
#undef CONFIG_SYS_ENV_SECT_SIZE
-#undef CONFIG_NAND_OMAP_ECCSCHEME
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
#define CONFIG_SYS_ENV_SECT_SIZE (512 << 10) /* 512 KiB */
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 86fc8edd65..158773aced 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -26,7 +26,6 @@
10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 3
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
#define CONFIG_SYS_ENV_SECT_SIZE SZ_128K
/* NAND: SPL falcon mode configs */
#if defined(CONFIG_SPL_OS_BOOT)
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 8d1233c075..eeb9ef8c74 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -31,7 +31,6 @@
10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 3
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
#define CONFIG_SYS_ENV_SECT_SIZE SZ_128K
/* NAND: SPL falcon mode configs */
#if defined(CONFIG_SPL_OS_BOOT)
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index ced449d7ad..c1ef040ce3 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -84,6 +84,5 @@
50, 51, 52, 53, 54, 55, 56, 57, }
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
#endif /* __IGEP00X0_H */
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 0da7388bee..e71f7371d8 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -27,7 +27,6 @@
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 13
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
#define CONFIG_SYS_NAND_MAX_OOBFREE 2
#define CONFIG_SYS_NAND_MAX_ECCPOS 56
#endif
diff --git a/include/configs/phycore_am335x_r2.h b/include/configs/phycore_am335x_r2.h
index 935bb7a07c..af6f7e14df 100644
--- a/include/configs/phycore_am335x_r2.h
+++ b/include/configs/phycore_am335x_r2.h
@@ -96,7 +96,6 @@
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
/* NAND: SPL related configs */
#ifdef CONFIG_SPL_OS_BOOT
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index fd74d5735e..615458cde8 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -82,7 +82,6 @@
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
#define CONFIG_SYS_NAND_ECCSTEPS 4
#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index ede7199038..a47e2c5b28 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -131,7 +131,6 @@
56, 57, 58, 59, 60, 61, 62, 63}
#define CONFIG_SYS_NAND_ECCSIZE 256
#define CONFIG_SYS_NAND_ECCBYTES 3
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index 5964b59da8..fa99152d6f 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -68,7 +68,6 @@
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
/* SPL */
/* Defines for SPL */
--
2.39.5