From 22b618346acb95dae8fddf151202829b6f78667f Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Wed, 14 Jan 2015 19:28:38 +0100
Subject: [PATCH] sunxi: Drop pll6 setting from clock_init_uart
As the comment says now that we have SPL support this is no longer necessary,
as PLL6 is already setup with the exact same parameters by the SPL.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
---
arch/arm/cpu/armv7/sunxi/clock_sun6i.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
index d7a7040b72..e2a78676b1 100644
--- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
@@ -45,10 +45,10 @@ void clock_init_safe(void)
void clock_init_uart(void)
{
+#if CONFIG_CONS_INDEX < 5
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-#if CONFIG_CONS_INDEX < 5
/* uart clock source is apb2 */
writel(APB2_CLK_SRC_OSC24M|
APB2_CLK_RATE_N_1|
@@ -68,9 +68,6 @@ void clock_init_uart(void)
/* enable R_PIO and R_UART clocks, and de-assert resets */
prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_UART);
#endif
-
- /* Dup with clock_init_safe(), drop once sun6i SPL support lands */
- writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
}
int clock_twi_onoff(int port, int state)
--
2.39.5