From 90744c1a14c54d08c9981869dec9262289da2d6b Mon Sep 17 00:00:00 2001
From: Caleb Connolly <caleb.connolly@linaro.org>
Date: Mon, 26 Feb 2024 17:26:28 +0000
Subject: [PATCH] board: qcs404-evb: drop board code
This board is entirely supported by the generic arch code and DTS. The
board code used to handle turning on the vbus regulator, however this is
now handled via DT.
With this, the board specific defconfig is also no longer needed, so
drop it as well.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org> #qcs404
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
---
board/qualcomm/qcs404-evb/Makefile | 6 ---
board/qualcomm/qcs404-evb/qcs404-evb.c | 49 ----------------------
configs/qcs404evb_defconfig | 56 --------------------------
3 files changed, 111 deletions(-)
delete mode 100644 board/qualcomm/qcs404-evb/Makefile
delete mode 100644 board/qualcomm/qcs404-evb/qcs404-evb.c
delete mode 100644 configs/qcs404evb_defconfig
diff --git a/board/qualcomm/qcs404-evb/Makefile b/board/qualcomm/qcs404-evb/Makefile
deleted file mode 100644
index 4665827e08..0000000000
--- a/board/qualcomm/qcs404-evb/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2022 Sumit Garg <sumit.garg@linaro.org>
-#
-
-obj-y += qcs404-evb.o
diff --git a/board/qualcomm/qcs404-evb/qcs404-evb.c b/board/qualcomm/qcs404-evb/qcs404-evb.c
deleted file mode 100644
index 1a4b1f97a3..0000000000
--- a/board/qualcomm/qcs404-evb/qcs404-evb.c
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Board init file for QCS404-EVB
- *
- * (C) Copyright 2022 Sumit Garg <sumit.garg@linaro.org>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <dm.h>
-#include <env.h>
-#include <init.h>
-#include <asm/cache.h>
-#include <asm/gpio.h>
-#include <asm/global_data.h>
-#include <fdt_support.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void qcom_board_init(void)
-{
- struct udevice *pmic_gpio;
- struct gpio_desc usb_vbus_boost_pin;
- int ret, node;
-
- ret = uclass_get_device_by_name(UCLASS_GPIO,
- "pms405_gpios@c000",
- &pmic_gpio);
- if (ret < 0) {
- printf("Failed to find pms405_gpios@c000 node.\n");
- return;
- }
-
- node = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(pmic_gpio),
- "usb_vbus_boost_pin");
- if (node < 0) {
- printf("Failed to find usb_hub_reset_pm dt node.\n");
- return;
- }
- ret = gpio_request_by_name_nodev(offset_to_ofnode(node), "gpios", 0,
- &usb_vbus_boost_pin, 0);
- if (ret < 0) {
- printf("Failed to request usb_hub_reset_pm gpio.\n");
- return;
- }
-
- dm_gpio_set_dir_flags(&usb_vbus_boost_pin,
- GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
-}
diff --git a/configs/qcs404evb_defconfig b/configs/qcs404evb_defconfig
deleted file mode 100644
index d85d193895..0000000000
--- a/configs/qcs404evb_defconfig
+++ /dev/null
@@ -1,56 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_BOARD="qcs404-evb"
-CONFIG_SKIP_LOWLEVEL_INIT=y
-CONFIG_COUNTER_FREQUENCY=19000000
-CONFIG_POSITION_INDEPENDENT=y
-CONFIG_ARCH_SNAPDRAGON=y
-CONFIG_DEFAULT_DEVICE_TREE="qcs404-evb"
-CONFIG_IDENT_STRING="\nQualcomm QCS404-EVB"
-CONFIG_SYS_LOAD_ADDR=0x80000000
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_BOOTDELAY=5
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="earlycon ignore_loglevel root= clk_ignore_unused"
-CONFIG_SAVE_PREV_BL_FDT_ADDR=y
-CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y
-CONFIG_SYS_CBSIZE=512
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=64
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-# CONFIG_NET is not set
-CONFIG_CLK=y
-CONFIG_CLK_QCOM_QCS404=y
-CONFIG_MSM_GPIO=y
-CONFIG_QCOM_PMIC_GPIO=y
-CONFIG_MISC=y
-CONFIG_MMC_HS400_SUPPORT=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ADMA=y
-CONFIG_MMC_SDHCI_MSM=y
-CONFIG_PHY=y
-CONFIG_PHY_QCOM_USB_HS_28NM=y
-CONFIG_PHY_QCOM_USB_SS=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_QCOM_QCS404=y
-CONFIG_DM_PMIC=y
-CONFIG_PMIC_QCOM=y
-CONFIG_MSM_SERIAL=y
-CONFIG_SPMI_MSM=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_STORAGE=y
-CONFIG_LMB_MAX_REGIONS=64
--
2.39.5