From df4ad94d053072e71e3c131d4d47d5a84b8d1ecc Mon Sep 17 00:00:00 2001
From: Priit Laes <plaes@plaes.org>
Date: Tue, 23 Oct 2018 20:20:30 +0300
Subject: [PATCH] sunxi: docs: Mention CONFIG_NAND requirement

Signed-off-by: Priit Laes <plaes@plaes.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
---
 board/sunxi/README.nand | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/board/sunxi/README.nand b/board/sunxi/README.nand
index a5d4ff0e90..98ebe5fb7f 100644
--- a/board/sunxi/README.nand
+++ b/board/sunxi/README.nand
@@ -20,9 +20,9 @@ pages.
 In order to accomodate that, we create a tool that will generate an
 SPL image that is ready to be programmed directly embedding the ECCs,
 randomized, and with the necessary bits needed to reduce the number of
-bitflips. The U-Boot build system, when configured for the NAND will
-also generate the image sunxi-spl-with-ecc.bin that will have been
-generated by that tool.
+bitflips. The U-Boot build system, when configured for the NAND (with
+CONFIG_NAND=y) will also generate the image sunxi-spl-with-ecc.bin
+that will have been generated by that tool.
 
 In order to flash your U-Boot image onto a board, assuming that the
 board is in FEL mode, you'll need the sunxi-tools that you can find at
-- 
2.39.5