From b7f677dc40429a8172c7ba5edcf3b426097e2881 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marex@denx.de>
Date: Sun, 23 Jun 2024 20:44:19 +0200
Subject: [PATCH] ARM: imx: Enable SPL DTO application support for i.MX8MP
DHCOM PDK2
Enable SPL DTO support to apply matching SoM specific DTOs to cater
for the SoM differences in DH i.MX8MP DHCOM PDK2 configuration. This
is already enabled in DH i.MX8MP DHCOM PDK3 configuration so align
the two configurations.
Fixes: ad1158c50e0e ("arm64: dts: imx8mp: Switch to DT overlays for i.MX8MP DHCOM SoM")
Signed-off-by: Marek Vasut <marex@denx.de>
---
configs/imx8mp_dhcom_pdk2_defconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/configs/imx8mp_dhcom_pdk2_defconfig b/configs/imx8mp_dhcom_pdk2_defconfig
index 5944c6c530..0ad0e23876 100644
--- a/configs/imx8mp_dhcom_pdk2_defconfig
+++ b/configs/imx8mp_dhcom_pdk2_defconfig
@@ -15,7 +15,6 @@ CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx8mp-dhcom-pdk2"
CONFIG_SPL_TEXT_BASE=0x920000
CONFIG_TARGET_IMX8MP_DH_DHCOM_PDK2=y
-CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_DM_RESET=y
CONFIG_SYS_MONITOR_LEN=1048576
CONFIG_SPL_MMC=y
@@ -41,6 +40,7 @@ CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000
+CONFIG_SPL_LOAD_FIT_APPLY_OVERLAY=y
CONFIG_SYS_BOOTM_LEN=0x8000000
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_OF_SYSTEM_SETUP=y
@@ -66,6 +66,7 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x4c000000
CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+# CONFIG_SPL_FIT_IMAGE_TINY is not set
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
CONFIG_SPL_WATCHDOG=y
--
2.39.5