From 6b0c174d5245986506f5fb7f2ffe6f1e01278367 Mon Sep 17 00:00:00 2001
From: Abel Vesa <abel.vesa@nxp.com>
Date: Fri, 1 Feb 2019 16:40:24 +0000
Subject: [PATCH] board: mx6sabresd: Remove the enet reset gpio handling
Rely on the phy-reset-gpios which is set in imx6qdl-sabresd dtsi
and get rid of the enet reset gpio handling from the board file.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---
board/freescale/mx6sabresd/mx6sabresd.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 0824a05745..385a18e923 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -94,13 +94,6 @@ static iomux_v3_cfg_t const enet_pads[] = {
static void setup_iomux_enet(void)
{
SETUP_IOMUX_PADS(enet_pads);
-
- /* Reset AR8031 PHY */
- gpio_request(IMX_GPIO_NR(1, 25), "ENET PHY Reset");
- gpio_direction_output(IMX_GPIO_NR(1, 25) , 0);
- mdelay(10);
- gpio_set_value(IMX_GPIO_NR(1, 25), 1);
- udelay(100);
}
static iomux_v3_cfg_t const usdhc2_pads[] = {
--
2.39.5