From 398bd2965c3f0c57d36407ef79d976cb09b0e2b5 Mon Sep 17 00:00:00 2001
From: Roger Quadros <rogerq@kernel.org>
Date: Fri, 29 Sep 2023 16:46:42 +0300
Subject: [PATCH] arm: dts: k3-am64-evm: Mark dependent nodes for
pre-relocation phase
CPSW node needs PHY, MDIO, pinmux, DMA and INTC nodes.
USB and MMC nodes need pinmux.
Mark them as 'bootph-all' so they are available in all
pre-relocation phases.
Fixes below dts warning:
<stdout>: Warning (dmas_property): /bus@f4000/ethernet@8000000:dmas: Could not get phandle node for (cell 0)
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
---
arch/arm/dts/k3-am642-evm-u-boot.dtsi | 48 +++++++++++++++++++++++++++
arch/arm/dts/k3-am642-r5-evm.dts | 8 +++++
2 files changed, 56 insertions(+)
diff --git a/arch/arm/dts/k3-am642-evm-u-boot.dtsi b/arch/arm/dts/k3-am642-evm-u-boot.dtsi
index d06955dfbc..953bbe9aaf 100644
--- a/arch/arm/dts/k3-am642-evm-u-boot.dtsi
+++ b/arch/arm/dts/k3-am642-evm-u-boot.dtsi
@@ -51,6 +51,10 @@
bootph-all;
};
+&main_usb0_pins_default {
+ bootph-all;
+};
+
&usb0 {
dr_mode="peripheral";
bootph-all;
@@ -100,12 +104,56 @@
bootph-all;
};
+&main_mmc1_pins_default {
+ bootph-all;
+};
+
&sdhci1 {
bootph-all;
};
+&inta_main_dmss {
+ bootph-all;
+};
+
+&main_pktdma {
+ bootph-all;
+};
+
+&mdio1_pins_default {
+ bootph-all;
+};
+
+&cpsw3g_mdio {
+ bootph-all;
+};
+
+&cpsw3g_phy0 {
+ bootph-all;
+};
+
+&rgmii1_pins_default {
+ bootph-all;
+};
+
+&rgmii2_pins_default {
+ bootph-all;
+};
+
&cpsw3g {
bootph-all;
+
+ ethernet-ports {
+ bootph-all;
+ };
+};
+
+&phy_gmii_sel {
+ bootph-all;
+};
+
+&cpsw_port1 {
+ bootph-all;
};
&cpsw_port2 {
diff --git a/arch/arm/dts/k3-am642-r5-evm.dts b/arch/arm/dts/k3-am642-r5-evm.dts
index 696735d8e2..64b3c3af63 100644
--- a/arch/arm/dts/k3-am642-r5-evm.dts
+++ b/arch/arm/dts/k3-am642-r5-evm.dts
@@ -74,6 +74,14 @@
ti,secure-host;
};
+&vtt_supply {
+ bootph-pre-ram;
+};
+
+&memorycontroller {
+ vtt-supply = <&vtt_supply>;
+};
+
&sdhci0 {
clocks = <&clk_200mhz>;
clock-names = "clk_xin";
--
2.39.5