From 2a8d4025c3bdeeca0484ab45606e08649f8b85a3 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org> Date: Fri, 26 Nov 2021 11:42:41 +0100 Subject: [PATCH] pci: Add standard PCI Config Address macros MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Lot of PCI and PCIe controllers are using standard Config Address for PCI Configuration Mechanism #1 or its extended version. So add PCI_CONF1_ADDRESS() and PCI_CONF1_EXT_ADDRESS() macros into U-Boot's pci.h header file which can be suitable for most PCI and PCIe controller drivers. Drivers do not have to invent their own macros and can use these new U-Boot macros. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org> --- include/pci.h | 45 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/include/pci.h b/include/pci.h index 6c1094d729..0ea41a7e1b 100644 --- a/include/pci.h +++ b/include/pci.h @@ -522,6 +522,51 @@ #include <pci_ids.h> +/* + * Config Address for PCI Configuration Mechanism #1 + * + * See PCI Local Bus Specification, Revision 3.0, + * Section 3.2.2.3.2, Figure 3-2, p. 50. + */ + +#define PCI_CONF1_BUS_SHIFT 16 /* Bus number */ +#define PCI_CONF1_DEV_SHIFT 11 /* Device number */ +#define PCI_CONF1_FUNC_SHIFT 8 /* Function number */ + +#define PCI_CONF1_BUS_MASK 0xff +#define PCI_CONF1_DEV_MASK 0x1f +#define PCI_CONF1_FUNC_MASK 0x7 +#define PCI_CONF1_REG_MASK 0xfc /* Limit aligned offset to a maximum of 256B */ + +#define PCI_CONF1_ENABLE BIT(31) +#define PCI_CONF1_BUS(x) (((x) & PCI_CONF1_BUS_MASK) << PCI_CONF1_BUS_SHIFT) +#define PCI_CONF1_DEV(x) (((x) & PCI_CONF1_DEV_MASK) << PCI_CONF1_DEV_SHIFT) +#define PCI_CONF1_FUNC(x) (((x) & PCI_CONF1_FUNC_MASK) << PCI_CONF1_FUNC_SHIFT) +#define PCI_CONF1_REG(x) ((x) & PCI_CONF1_REG_MASK) + +#define PCI_CONF1_ADDRESS(bus, dev, func, reg) \ + (PCI_CONF1_ENABLE | \ + PCI_CONF1_BUS(bus) | \ + PCI_CONF1_DEV(dev) | \ + PCI_CONF1_FUNC(func) | \ + PCI_CONF1_REG(reg)) + +/* + * Extension of PCI Config Address for accessing extended PCIe registers + * + * No standardized specification, but used on lot of non-ECAM-compliant ARM SoCs + * or on AMD Barcelona and new CPUs. Reserved bits [27:24] of PCI Config Address + * are used for specifying additional 4 high bits of PCI Express register. + */ + +#define PCI_CONF1_EXT_REG_SHIFT 16 +#define PCI_CONF1_EXT_REG_MASK 0xf00 +#define PCI_CONF1_EXT_REG(x) (((x) & PCI_CONF1_EXT_REG_MASK) << PCI_CONF1_EXT_REG_SHIFT) + +#define PCI_CONF1_EXT_ADDRESS(bus, dev, func, reg) \ + (PCI_CONF1_ADDRESS(bus, dev, func, reg) | \ + PCI_CONF1_EXT_REG(reg)) + /* * Enhanced Configuration Access Mechanism (ECAM) * -- 2.39.5