From: Weijie Gao <weijie.gao@mediatek.com>
Date: Thu, 12 Nov 2020 08:37:07 +0000 (+0800)
Subject: mmc: mtk-sd: assign plat->cfg.f_max with a correct value
X-Git-Tag: v2025.01-rc5-pxa1908~2043^2~2
X-Git-Url: http://git.dujemihanovic.xyz/img/html/static/%7B%7B?a=commitdiff_plain;h=e58e68d93e7d73e42eac850ff0dafc634bf0d397;p=u-boot.git

mmc: mtk-sd: assign plat->cfg.f_max with a correct value

Currently this driver does not set the value of plat->cfg.f_max, which
results in that MMC framework will always run at the lowest frequency.

This patch sets plat->cfg.f_max to the maximum allowed frequency, which
equals to the source clock frequency.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
---

diff --git a/drivers/mmc/mtk-sd.c b/drivers/mmc/mtk-sd.c
index 5e2ece0499..3b9c12266a 100644
--- a/drivers/mmc/mtk-sd.c
+++ b/drivers/mmc/mtk-sd.c
@@ -1639,6 +1639,8 @@ static int msdc_drv_probe(struct udevice *dev)
 	else
 		cfg->f_min = host->src_clk_freq / (4 * 4095);
 
+	cfg->f_max = host->src_clk_freq;
+
 	cfg->b_max = 1024;
 	cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;