From: Tom Rini <trini@ti.com>
Date: Wed, 5 Feb 2014 15:24:18 +0000 (-0500)
Subject: SPL: Add CONFIG_SUPPORT_EMMC_BOOT support to CONFIG_SPL_FRAMEWORK
X-Git-Tag: v2025.01-rc5-pxa1908~15470^2~162^2~7
X-Git-Url: http://git.dujemihanovic.xyz/img/html/static/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=7dbe63bc950bbd12d021f72bf04104688cd324a9;p=u-boot.git

SPL: Add CONFIG_SUPPORT_EMMC_BOOT support to CONFIG_SPL_FRAMEWORK

We use the switch CONFIG_SUPPORT_EMMC_BOOT today to enable some
additional features of the eMMC boot partitions.  Add support for being
told that we have booted from one of these partitions to the spl
framework and implement this on TI OMAP/related.

Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
---

diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 69fff323d3..52e0f4a6cf 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -66,7 +66,18 @@ u32 spl_boot_device(void)
 
 u32 spl_boot_mode(void)
 {
-	return gd->arch.omap_boot_params.omap_bootmode;
+	u32 val = gd->arch.omap_boot_params.omap_bootmode;
+
+	if (val == MMCSD_MODE_RAW)
+		return MMCSD_MODE_RAW;
+	else if (val == MMCSD_MODE_FAT)
+		return MMCSD_MODE_FAT;
+	else
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+		return MMCSD_MODE_EMMCBOOT;
+#else
+		return MMCSD_MODE_UNDEFINED;
+#endif
 }
 
 void spl_board_init(void)
diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
index 13fbff082c..fa6f891bc8 100644
--- a/common/spl/spl_mmc.c
+++ b/common/spl/spl_mmc.c
@@ -110,6 +110,30 @@ void spl_mmc_load_image(void)
 		err = spl_load_image_fat(&mmc->block_dev,
 					CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION,
 					CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
+#endif
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+	} else if (boot_mode == MMCSD_MODE_EMMCBOOT) {
+		/*
+		 * We need to check what the partition is configured to.
+		 * 1 and 2 match up to boot0 / boot1 and 7 is user data
+		 * which is the first physical partition (0).
+		 */
+		int part = (mmc->part_config >> 3) & PART_ACCESS_MASK;
+
+		if (part == 7)
+			part = 0;
+
+		if (mmc_switch_part(0, part)) {
+#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
+			puts("MMC partition switch failed\n");
+#endif
+			hang();
+		}
+#ifdef CONFIG_SPL_OS_BOOT
+		if (spl_start_uboot() || mmc_load_image_raw_os(mmc))
+#endif
+		err = mmc_load_image_raw(mmc,
+			CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
 #endif
 	} else {
 #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/spl.h b/include/spl.h
index 5e248561f1..dad00c0075 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -16,6 +16,7 @@
 #define MMCSD_MODE_UNDEFINED	0
 #define MMCSD_MODE_RAW		1
 #define MMCSD_MODE_FAT		2
+#define MMCSD_MODE_EMMCBOOT	3
 
 struct spl_image_info {
 	const char *name;