From 488f5d8790c451fc527fe5d2ef218f2a5e40ea17 Mon Sep 17 00:00:00 2001
From: Ladislav Michl <ladis@linux-mips.org>
Date: Mon, 23 Mar 2009 17:46:27 +0100
Subject: [PATCH] Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
---
include/configs/ADNPESC1.h | 1 -
include/configs/B2.h | 2 --
include/configs/DK1C20.h | 1 -
include/configs/DK1S10.h | 1 -
include/configs/EXBITGEN.h | 2 --
include/configs/SMN42.h | 2 --
include/configs/SX1.h | 2 --
include/configs/VCMA9.h | 3 ---
include/configs/W7OLMC.h | 2 --
include/configs/W7OLMG.h | 2 --
include/configs/actux1.h | 2 --
include/configs/actux2.h | 2 --
include/configs/actux3.h | 2 --
include/configs/actux4.h | 2 --
include/configs/apollon.h | 1 -
include/configs/armadillo.h | 2 --
include/configs/assabet.h | 2 --
include/configs/cerf250.h | 2 --
include/configs/cm4008.h | 2 --
include/configs/cm41xx.h | 2 --
include/configs/cradle.h | 2 --
include/configs/csb226.h | 2 --
include/configs/csb272.h | 1 -
include/configs/csb472.h | 1 -
include/configs/delta.h | 2 --
include/configs/dnp1110.h | 2 --
include/configs/eNET.h | 2 --
include/configs/ep7312.h | 2 --
include/configs/evb4510.h | 2 --
include/configs/gcplus.h | 2 --
include/configs/hymod.h | 2 --
include/configs/impa7.h | 2 --
include/configs/innokom.h | 2 --
include/configs/integratorap.h | 1 -
include/configs/integratorcp.h | 1 -
include/configs/ixdp425.h | 2 --
include/configs/ixdpg425.h | 1 -
include/configs/lart.h | 2 --
include/configs/logodl.h | 2 --
include/configs/lpc2292sodimm.h | 2 --
include/configs/lpd7a400.h | 2 --
include/configs/lpd7a404.h | 2 --
include/configs/lubbock.h | 2 --
include/configs/modnet50.h | 2 --
include/configs/mx1ads.h | 1 -
include/configs/mx1fs2.h | 2 --
include/configs/netstar.h | 2 --
include/configs/nmdk8815.h | 1 -
include/configs/ns9750dev.h | 2 --
include/configs/omap1510inn.h | 2 --
include/configs/omap1610h2.h | 2 --
include/configs/omap1610inn.h | 2 --
include/configs/omap2420h4.h | 2 --
include/configs/omap3_beagle.h | 2 --
include/configs/omap3_evm.h | 3 ---
include/configs/omap3_overo.h | 3 ---
include/configs/omap3_pandora.h | 3 ---
include/configs/omap3_zoom1.h | 2 --
include/configs/omap5912osk.h | 2 --
include/configs/omap730p2.h | 2 --
include/configs/pdnb3.h | 1 -
include/configs/pleb2.h | 2 --
include/configs/pxa255_idp.h | 2 --
include/configs/sbc2410x.h | 2 --
include/configs/sc520_cdp.h | 2 --
include/configs/sc520_spunk.h | 2 --
include/configs/scb9328.h | 2 --
include/configs/shannon.h | 2 --
include/configs/smdk2400.h | 2 --
include/configs/smdk2410.h | 2 --
include/configs/trab.h | 2 --
include/configs/trizepsiv.h | 2 --
include/configs/versatile.h | 1 -
include/configs/voiceblue.h | 2 --
include/configs/wepep250.h | 2 --
include/configs/xaeniax.h | 2 --
include/configs/xm250.h | 2 --
include/configs/xsengine.h | 1 -
include/configs/zylonite.h | 2 --
79 files changed, 148 deletions(-)
diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h
index 0977bee35d..b8afc172c5 100644
--- a/include/configs/ADNPESC1.h
+++ b/include/configs/ADNPESC1.h
@@ -44,7 +44,6 @@
#define CONFIG_ADNPESC1 1 /* SSV ADNP/ESC1 board */
#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */
#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */
-#undef CONFIG_SYS_CLKS_IN_HZ
#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
/*------------------------------------------------------------------------
diff --git a/include/configs/B2.h b/include/configs/B2.h
index c77ea1fc47..340b847b91 100644
--- a/include/configs/B2.h
+++ b/include/configs/B2.h
@@ -116,8 +116,6 @@
#define CONFIG_SYS_MEMTEST_START 0x0C400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x0C800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x0c700000 /* default load address */
#define CONFIG_SYS_HZ 1000 /* 1 kHz */
diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h
index db9c17df91..45ff2f7dbc 100644
--- a/include/configs/DK1C20.h
+++ b/include/configs/DK1C20.h
@@ -50,7 +50,6 @@
#define CONFIG_DK1C20 1 /* Cyclone DK-1C20 board*/
#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */
#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */
-#undef CONFIG_SYS_CLKS_IN_HZ
#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
/*------------------------------------------------------------------------
diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h
index 3bd270cdf2..ae567a32b3 100644
--- a/include/configs/DK1S10.h
+++ b/include/configs/DK1S10.h
@@ -48,7 +48,6 @@
#define CONFIG_DK1S10 1 /* Stratix DK-1S10 board*/
#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */
#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */
-#undef CONFIG_SYS_CLKS_IN_HZ
#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
/*------------------------------------------------------------------------
diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
index 1dd6e573d2..4729464f21 100644
--- a/include/configs/EXBITGEN.h
+++ b/include/configs/EXBITGEN.h
@@ -129,8 +129,6 @@
{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
57600, 115200, 230400, 460800, 921600 }
-#define CONFIG_SYS_CLKS_IN_HZ 1 /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h
index 45e6a58d99..d6f41f926d 100644
--- a/include/configs/SMN42.h
+++ b/include/configs/SMN42.h
@@ -139,8 +139,6 @@
#define CONFIG_SYS_MEMTEST_START 0x81800000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x83000000 /* 24 MB in SRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */
/* for uClinux img is here*/
diff --git a/include/configs/SX1.h b/include/configs/SX1.h
index 78c5152e6f..ebc8236061 100644
--- a/include/configs/SX1.h
+++ b/include/configs/SX1.h
@@ -133,8 +133,6 @@
#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */
/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index d9bcf6b7ae..8550223d4d 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -172,9 +172,6 @@
#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_LOAD_ADDR 0x30800000 /* default load address */
-
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
/* we configure PWM Timer 4 to 1us ~ 1MHz */
/*#define CONFIG_SYS_HZ 1000000 */
#define CONFIG_SYS_HZ 1562500
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index 51d0a0a6ac..ceef76eeaf 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -131,8 +131,6 @@
/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE {9600}
-#define CONFIG_SYS_CLKS_IN_HZ 1 /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info (bd_t) */
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index ca1a9d4a77..11e063010b 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -139,8 +139,6 @@
/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE {9600}
-#define CONFIG_SYS_CLKS_IN_HZ 1 /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info (bd_t) */
diff --git a/include/configs/actux1.h b/include/configs/actux1.h
index adbc39951c..91f6ff03f9 100644
--- a/include/configs/actux1.h
+++ b/include/configs/actux1.h
@@ -95,8 +95,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00400000
#define CONFIG_SYS_MEMTEST_END 0x00800000
-/* everything, incl board info, in Hz */
-#undef CONFIG_SYS_CLKS_IN_HZ
/* spec says 66.666 MHz, but it appears to be 33 */
#define CONFIG_SYS_HZ 3333333
diff --git a/include/configs/actux2.h b/include/configs/actux2.h
index 4c579ebe2f..b936938359 100644
--- a/include/configs/actux2.h
+++ b/include/configs/actux2.h
@@ -86,8 +86,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00400000
#define CONFIG_SYS_MEMTEST_END 0x00800000
-/* everything, incl board info, in Hz */
-#undef CONFIG_SYS_CLKS_IN_HZ
/* spec says 66.666 MHz, but it appears to be 33 */
#define CONFIG_SYS_HZ 3333333
diff --git a/include/configs/actux3.h b/include/configs/actux3.h
index 694f52254a..f5ee899102 100644
--- a/include/configs/actux3.h
+++ b/include/configs/actux3.h
@@ -84,8 +84,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00400000
#define CONFIG_SYS_MEMTEST_END 0x00800000
-/* everything, incl board info, in Hz */
-#undef CONFIG_SYS_CLKS_IN_HZ
/* spec says 66.666 MHz, but it appears to be 33 */
#define CONFIG_SYS_HZ 3333333
diff --git a/include/configs/actux4.h b/include/configs/actux4.h
index cdc9956725..8d70a268ce 100644
--- a/include/configs/actux4.h
+++ b/include/configs/actux4.h
@@ -83,8 +83,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00400000
#define CONFIG_SYS_MEMTEST_END 0x00800000
-/* everything, incl board info, in Hz */
-#undef CONFIG_SYS_CLKS_IN_HZ
/* spec says 66.666 MHz, but it appears to be 33 */
#define CONFIG_SYS_HZ 3333333
diff --git a/include/configs/apollon.h b/include/configs/apollon.h
index f83dd9c243..97c8806e29 100644
--- a/include/configs/apollon.h
+++ b/include/configs/apollon.h
@@ -196,7 +196,6 @@
#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0)
#define CONFIG_SYS_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M)
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
/* default load address */
#define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0)
diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h
index 5a4ceaf69f..ef6ce229cd 100644
--- a/include/configs/armadillo.h
+++ b/include/configs/armadillo.h
@@ -105,8 +105,6 @@
#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x00040000 /* default load address for armadillo: kernel img is here*/
#define CONFIG_SYS_HZ 2000 /* decrementer freq: 2 kHz */
diff --git a/include/configs/assabet.h b/include/configs/assabet.h
index 024fa207e2..4da68b3e70 100644
--- a/include/configs/assabet.h
+++ b/include/configs/assabet.h
@@ -105,8 +105,6 @@
#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ
-
#define CONFIG_SYS_LOAD_ADDR 0xc0000000 /* default load address */
#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h
index f19374e30c..751e03c13f 100644
--- a/include/configs/cerf250.h
+++ b/include/configs/cerf250.h
@@ -113,8 +113,6 @@
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ
-
#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h
index ce36a24261..124fad7b35 100644
--- a/include/configs/cm4008.h
+++ b/include/configs/cm4008.h
@@ -93,8 +93,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00800000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 16 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */
#define CONFIG_SYS_HZ (1000) /* 1ms resolution ticks */
diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h
index 02cb1efd0f..5c255ce39a 100644
--- a/include/configs/cm41xx.h
+++ b/include/configs/cm41xx.h
@@ -93,8 +93,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00800000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 16 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */
#define CONFIG_SYS_HZ (1000) /* 1ms resolution ticks */
diff --git a/include/configs/cradle.h b/include/configs/cradle.h
index 5131175045..850d93b03e 100644
--- a/include/configs/cradle.h
+++ b/include/configs/cradle.h
@@ -99,8 +99,6 @@
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
index d65c14a672..d9f85f01ee 100644
--- a/include/configs/csb226.h
+++ b/include/configs/csb226.h
@@ -124,8 +124,6 @@
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */
/* RS: where is this documented? */
/* RS: is this where U-Boot is */
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index 5d3b09aa3c..204aea0e82 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -140,7 +140,6 @@
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_CLKS_IN_HZ 1 /* everything, incl board info, in Hz */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index a33efde9fe..9b3a11c1ac 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -139,7 +139,6 @@
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_SYS_CLKS_IN_HZ 1 /* everything, incl board info, in Hz */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
diff --git a/include/configs/delta.h b/include/configs/delta.h
index 001b48a7e7..f5508b7740 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -166,8 +166,6 @@
#define CONFIG_SYS_MEMTEST_START 0x80400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x80800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h
index e329fd3a02..3f658a7b4a 100644
--- a/include/configs/dnp1110.h
+++ b/include/configs/dnp1110.h
@@ -109,8 +109,6 @@
#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xc0200000 /* default load address */
#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
diff --git a/include/configs/eNET.h b/include/configs/eNET.h
index 84e1aefe1f..f7e6608baa 100644
--- a/include/configs/eNET.h
+++ b/include/configs/eNET.h
@@ -116,8 +116,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 1 ... 16 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_HZ 1024 /* incrementer freq: 1kHz */
diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h
index 322a3ca41a..d12b13f07a 100644
--- a/include/configs/ep7312.h
+++ b/include/configs/ep7312.h
@@ -107,8 +107,6 @@
#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xc0500000 /* default load address */
#define CONFIG_SYS_HZ 2000 /* decrementer freq: 2 kHz */
diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h
index cbaae62059..ffc9408bc8 100644
--- a/include/configs/evb4510.h
+++ b/include/configs/evb4510.h
@@ -122,8 +122,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00780000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x00000000 /* default load address */
#define CONFIG_SYS_SYS_CLK_FREQ 50000000 /* CPU freq: 50 MHz */
diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h
index c0b3ab91e4..81ee05ffaa 100644
--- a/include/configs/gcplus.h
+++ b/include/configs/gcplus.h
@@ -118,8 +118,6 @@
#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xc0000000 /* default load address */
#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 2dacfb6e07..284672b338 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -271,8 +271,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x03c00000 /* 4 ... 60 MB in DRAM */
-#define CONFIG_SYS_CLKS_IN_HZ 1 /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
diff --git a/include/configs/impa7.h b/include/configs/impa7.h
index a3d023f630..efd4214d91 100644
--- a/include/configs/impa7.h
+++ b/include/configs/impa7.h
@@ -106,8 +106,6 @@
#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xc1000000 /* default load address */
#define CONFIG_SYS_HZ 2000 /* decrementer freq: 2 kHz */
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index 043ae2f364..895998adf4 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -115,8 +115,6 @@
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* load kernel to this address */
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index 6ce3b4dc01..9231e64039 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -102,7 +102,6 @@
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
/*-----------------------------------------------------------------------
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index 5b4747a575..b4219d03e1 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -121,7 +121,6 @@ SIB at Block62 End Block62 address 0x24f80000
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size*/
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
/*-----------------------------------------------------------------------
diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h
index 70f3987365..768e8366bd 100644
--- a/include/configs/ixdp425.h
+++ b/include/configs/ixdp425.h
@@ -104,8 +104,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */
#define CONFIG_SYS_HZ 3333333 /* spec says 66.666 MHz, but it appears to be 33 */
diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h
index 193008e0ef..75707e597d 100644
--- a/include/configs/ixdpg425.h
+++ b/include/configs/ixdpg425.h
@@ -115,7 +115,6 @@
#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
/* valid baudrates */
diff --git a/include/configs/lart.h b/include/configs/lart.h
index 38b8e75f45..877d5c76ba 100644
--- a/include/configs/lart.h
+++ b/include/configs/lart.h
@@ -102,8 +102,6 @@
#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xc8000000 /* default load address */
#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
diff --git a/include/configs/logodl.h b/include/configs/logodl.h
index cd105da313..9afa800139 100644
--- a/include/configs/logodl.h
+++ b/include/configs/logodl.h
@@ -108,8 +108,6 @@
#define CONFIG_SYS_MEMTEST_START 0x08000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x0800ffff /* 64 KiB */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x08000000 /* load kernel to this address */
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h
index 563d35b20c..fa2917eb5d 100644
--- a/include/configs/lpc2292sodimm.h
+++ b/include/configs/lpc2292sodimm.h
@@ -106,8 +106,6 @@
#define CONFIG_SYS_MEMTEST_START 0x40000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x40000000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x00040000 /* default load address for */
/* armadillo: kernel img is here*/
diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h
index 575f2a1c5e..b1bd74fc6f 100644
--- a/include/configs/lpd7a400.h
+++ b/include/configs/lpd7a400.h
@@ -99,8 +99,6 @@
#define CONFIG_SYS_MEMTEST_START 0xc0300000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xc0f00000 /* default load address */
/* valid baudrates */
diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h
index 3e726a01de..b197674d47 100644
--- a/include/configs/lpd7a404.h
+++ b/include/configs/lpd7a404.h
@@ -99,8 +99,6 @@
#define CONFIG_SYS_MEMTEST_START 0xc0300000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xc0f00000 /* default load address */
/* valid baudrates */
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index 69774d7467..a4b430bbc5 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -122,8 +122,6 @@
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h
index 27213a8d8d..b8ae018efa 100644
--- a/include/configs/modnet50.h
+++ b/include/configs/modnet50.h
@@ -111,8 +111,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x00500000 /* default load address */
#define CONFIG_SYS_HZ 900 /* decrementer freq: 2 kHz */
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index f136b0ca8c..c3812e6c32 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -133,7 +133,6 @@
#define CONFIG_SYS_MEMTEST_START 0x09000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x0AF00000 /* 63 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CONFIG_SYS_LOAD_ADDR 0x08800000 /* default load address */
/*#define CONFIG_SYS_HZ 1000 */
#define CONFIG_SYS_HZ 3686400
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
index a19eb78409..b174b5fdf5 100644
--- a/include/configs/mx1fs2.h
+++ b/include/configs/mx1fs2.h
@@ -80,8 +80,6 @@
#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */
#define CONFIG_SYS_MEMTEST_END 0x08F00000
-#undef CONFIG_SYS_CLKS_IN_HZ /* use HZ for freq. display */
-
#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */
diff --git a/include/configs/netstar.h b/include/configs/netstar.h
index 0b38549dff..37450d4344 100644
--- a/include/configs/netstar.h
+++ b/include/configs/netstar.h
@@ -211,8 +211,6 @@
#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
(CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */
/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
diff --git a/include/configs/nmdk8815.h b/include/configs/nmdk8815.h
index 543780d77f..6d7b94f9c9 100644
--- a/include/configs/nmdk8815.h
+++ b/include/configs/nmdk8815.h
@@ -96,7 +96,6 @@
/* timing informazion */
#define CONFIG_SYS_HZ (2400000 / 256) /* Timer0: 2.4Mhz + divider */
#define CONFIG_SYS_TIMERBASE 0x101E2000
-#undef CONFIG_SYS_CLKS_IN_HZ
/* serial port (PL011) configuration */
#define CONFIG_PL011_SERIAL
diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h
index b22c33cc80..79dcd647c2 100644
--- a/include/configs/ns9750dev.h
+++ b/include/configs/ns9750dev.h
@@ -122,8 +122,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00780000 /* 7,5 MB in DRAM */ /* @TODO */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x00600000 /* default load address */ /* @TODO */
#define CONFIG_SYS_HZ (CPU_CLK_FREQ/64)
diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
index c7d1b6c039..ac5040ab01 100644
--- a/include/configs/omap1510inn.h
+++ b/include/configs/omap1510inn.h
@@ -130,8 +130,6 @@
#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */
/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
index e2a63607c0..79cf608b7d 100644
--- a/include/configs/omap1610h2.h
+++ b/include/configs/omap1610h2.h
@@ -125,8 +125,6 @@
#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */
/* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by
diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h
index 5dcfce1592..ce30f55db2 100644
--- a/include/configs/omap1610inn.h
+++ b/include/configs/omap1610inn.h
@@ -130,8 +130,6 @@
#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */
/* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 983b5f2517..aa8232669a 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -216,8 +216,6 @@
#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */
#define CONFIG_SYS_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M)
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */
/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 0f9344b0c4..ad00b4c29e 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -219,8 +219,6 @@
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
0x01F00000) /* 31MB */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
/* load address */
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index f4498a9bcc..baf71f4f2b 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -212,9 +212,6 @@
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
0x01F00000) /* 31MB */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, */
- /* in Hz */
-
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
/* address */
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index dee0417de9..02d4fbc805 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -206,9 +206,6 @@
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
0x01F00000) /* 31MB */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, */
- /* in Hz */
-
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
/* address */
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index 00c0374644..9a32452fbf 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -208,9 +208,6 @@
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
0x01F00000) /* 31MB */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, */
- /* in Hz */
-
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
/* address */
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index f8ae163947..b544ea11d0 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -216,8 +216,6 @@
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
0x01F00000) /* 31MB */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
/* load address */
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index 63cd9c6b76..2bc53837d4 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -134,8 +134,6 @@
#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */
/* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by
diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h
index 166d592ccd..0b0d8b61d8 100644
--- a/include/configs/omap730p2.h
+++ b/include/configs/omap730p2.h
@@ -142,8 +142,6 @@
#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */
/* The OMAP730 has 3 general purpose MPU timers, they can be driven by
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index 4da401f46b..edaa81b59b 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -117,7 +117,6 @@
#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
/* valid baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h
index 59741a98f9..ab9ea4fdee 100644
--- a/include/configs/pleb2.h
+++ b/include/configs/pleb2.h
@@ -122,8 +122,6 @@
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index d1c2c650c2..5e2e7cfcc8 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -236,8 +236,6 @@
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xa0800000 /* default load address */
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
index bf4a14e004..102c45a33e 100644
--- a/include/configs/sbc2410x.h
+++ b/include/configs/sbc2410x.h
@@ -135,8 +135,6 @@
#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x33000000 /* default load address */
/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h
index 960350c6c6..3e2bb02a46 100644
--- a/include/configs/sc520_cdp.h
+++ b/include/configs/sc520_cdp.h
@@ -116,8 +116,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 1 ... 16 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_HZ 1024 /* incrementer freq: 1kHz */
diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h
index 2445a34168..d42ef84216 100644
--- a/include/configs/sc520_spunk.h
+++ b/include/configs/sc520_spunk.h
@@ -117,8 +117,6 @@
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 1 ... 16 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_HZ 1024 /* incrementer freq: 1kHz */
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index 5971df72fc..10db53531b 100644
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -86,8 +86,6 @@
#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */
#define CONFIG_SYS_MEMTEST_END 0x08F00000
-#undef CONFIG_SYS_CLKS_IN_HZ /* use HZ for freq. display */
-
#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */
diff --git a/include/configs/shannon.h b/include/configs/shannon.h
index 75ba34cdb8..717036c3cb 100644
--- a/include/configs/shannon.h
+++ b/include/configs/shannon.h
@@ -105,8 +105,6 @@
#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xd0000000 /* default load address */
#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h
index 6388be4d49..856d1fb16c 100644
--- a/include/configs/smdk2400.h
+++ b/include/configs/smdk2400.h
@@ -137,8 +137,6 @@
#define CONFIG_SYS_MEMTEST_START 0x0c000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x0e000000 /* 32 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x0cf00000 /* default load address */
/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index ecd958b557..797a59684c 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -120,8 +120,6 @@
#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x33000000 /* default load address */
/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
diff --git a/include/configs/trab.h b/include/configs/trab.h
index 8f13c35614..625d8ee8ba 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -316,8 +316,6 @@
#define CONFIG_SYS_MEMTEST_START 0x0C000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x0D000000 /* 16 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0x0CF00000 /* default load address */
#ifdef CONFIG_TRAB_50MHZ
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index 70e5ce97b0..c2744b5eba 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -163,8 +163,6 @@
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/versatile.h b/include/configs/versatile.h
index 852becb36d..8f6383b051 100644
--- a/include/configs/versatile.h
+++ b/include/configs/versatile.h
@@ -144,7 +144,6 @@
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
/*-----------------------------------------------------------------------
diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h
index cadd90633d..b76c794667 100644
--- a/include/configs/voiceblue.h
+++ b/include/configs/voiceblue.h
@@ -210,8 +210,6 @@
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - PHYS_SDRAM_1_RESERVED
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
* This time is further subdivided by a local divisor.
*/
diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h
index d0afd29c32..717577f398 100644
--- a/include/configs/wepep250.h
+++ b/include/configs/wepep250.h
@@ -79,8 +79,6 @@
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest test area */
#define CONFIG_SYS_MEMTEST_END 0xa0800000
-#undef CONFIG_SYS_CLKS_IN_HZ /* use HZ for freq. display */
-
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 250247c5cc..086ca69c10 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -134,8 +134,6 @@
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/xm250.h b/include/configs/xm250.h
index 8e9d5ab7b3..922eb2c6b0 100644
--- a/include/configs/xm250.h
+++ b/include/configs/xm250.h
@@ -117,8 +117,6 @@
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h
index 5d13f9682e..cad414c1d9 100644
--- a/include/configs/xsengine.h
+++ b/include/configs/xsengine.h
@@ -139,7 +139,6 @@
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_MEMTEST_START 0xA0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xA0800000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */
#define CONFIG_SYS_LOAD_ADDR 0xA0000000 /* load kernel to this address */
diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index 6febeeafab..064740d3cc 100644
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -139,8 +139,6 @@
#define CONFIG_SYS_MEMTEST_START 0x9c000000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x9c400000 /* 4 ... 8 MB in DRAM */
-#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */
#define CONFIG_SYS_HZ 1000
--
2.39.5