From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Date: Mon, 25 Jun 2012 02:40:57 +0000 (+0000)
Subject: arm: bugfix: Move vector table before jumping relocated code
X-Git-Tag: v2025.01-rc5-pxa1908~17673^2~35^2~24^2~82
X-Git-Url: http://git.dujemihanovic.xyz/img/html/index.html?a=commitdiff_plain;h=f8b9d1d30ece82abccefac3c860c06f8b7da8fbb;p=u-boot.git

arm: bugfix: Move vector table before jumping relocated code

Interrupts and exceptions doesn't work in relocated code.
It badly use IRQ_STACK_START_IN in rom area as interrupt stack.
It is because the vecotr table is not moved to ram area.
This patch moves vector table before jumping relocated code.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Tested-by: Tom Rini <trini@ti.com>
---

diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 261835b6c6..22a3cedcb0 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -277,6 +277,18 @@ jump_2_ram:
 	mcr     p15, 0, r0, c7, c10, 4	@ DSB
 	mcr     p15, 0, r0, c7, c5, 4	@ ISB
 #endif
+/*
+ * Move vector table
+ */
+#if !defined(CONFIG_TEGRA2)
+#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD))
+	/* Set vector address in CP15 VBAR register */
+	ldr     r0, =_start
+	add     r0, r0, r9
+	mcr     p15, 0, r0, c12, c0, 0  @Set VBAR
+#endif
+#endif /* !Tegra2 */
+
 	ldr	r0, _board_init_r_ofs
 	adr	r1, _start
 	add	lr, r0, r1