From: Ajay Kumar <ajaykumar.rs@samsung.com>
Date: Wed, 4 Mar 2015 13:35:27 +0000 (+0530)
Subject: video: parade: configure SLP and RST GPIOs if specified in DT
X-Git-Tag: v2025.01-rc5-pxa1908~13509^2~7
X-Git-Url: http://git.dujemihanovic.xyz/img/html/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=55e70929b83bc512721d08cb32a7523458d9122d;p=u-boot.git

video: parade: configure SLP and RST GPIOs if specified in DT

Add support to configure EDP_RST GPIO and EDP_SLP GPIO,
if provided in parade DT node.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
---

diff --git a/drivers/video/parade.c b/drivers/video/parade.c
index 0f543f653c..ae5097160f 100644
--- a/drivers/video/parade.c
+++ b/drivers/video/parade.c
@@ -12,6 +12,7 @@
 #include <common.h>
 #include <i2c.h>
 #include <fdtdec.h>
+#include <asm/gpio.h>
 
 /*
  * Initialization of the chip is a process of writing certaing values into
@@ -180,6 +181,8 @@ static int parade_write_regs(int base_addr, const struct reg_data *table)
 
 int parade_init(const void *blob)
 {
+	struct gpio_desc rst_gpio;
+	struct gpio_desc slp_gpio;
 	int bus, old_bus;
 	int parent;
 	int node;
@@ -201,6 +204,14 @@ int parade_init(const void *blob)
 		return -1;
 	}
 
+	gpio_request_by_name_nodev(blob, node, "sleep-gpio", 0, &slp_gpio,
+				   GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
+
+	mdelay(10);
+
+	gpio_request_by_name_nodev(blob, node, "reset-gpio", 0, &rst_gpio,
+				   GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
+
 	bus = i2c_get_bus_num_fdt(parent);
 	old_bus = i2c_get_bus_num();