From: Jayesh Choudhary Date: Fri, 14 Jun 2024 12:44:38 +0000 (+0530) Subject: arm: mach-k3: j721s2: Enable QoS for DSS X-Git-Url: http://git.dujemihanovic.xyz/img/%7B%7B?a=commitdiff_plain;h=e33ae0a97a3ab5b29a201b23d0f2ecd08396191e;p=u-boot.git arm: mach-k3: j721s2: Enable QoS for DSS Enable Quality of Service (QoS) blocks for Display SubSystem (DSS), by servicing the DSS - DDR traffic from the Real-Time (RT) queue. This is done by setting the DSS DMA orderID to greater than 9. Before setting up the QoS, the ORDERID needs to be mapped to VBUSM sources using setup_navss_nb() function call that sets the threadmap for NBSS registers. (Section 10.2.9.2.10 "Quality of Service" in TRM[0]) Section 3.2.1 "Quality of Service (QoS)" in the TRM[0] provide more details. [0]: https://www.ti.com/lit/zip/spruj28 Signed-off-by: Jayesh Choudhary --- diff --git a/arch/arm/mach-k3/j721s2/j721s2_init.c b/arch/arm/mach-k3/j721s2/j721s2_init.c index fe9766e9b4..05453fcad4 100644 --- a/arch/arm/mach-k3/j721s2/j721s2_init.c +++ b/arch/arm/mach-k3/j721s2/j721s2_init.c @@ -22,6 +22,24 @@ #include "../sysfw-loader.h" #include "../common.h" +/* NAVSS North Bridge (NB) */ +#define NAVSS0_NBSS_NB0_CFG_MMRS 0x03702000 +#define NAVSS0_NBSS_NB1_CFG_MMRS 0x03703000 +#define NAVSS0_NBSS_NB0_CFG_NB_THREADMAP (NAVSS0_NBSS_NB0_CFG_MMRS + 0x10) +#define NAVSS0_NBSS_NB1_CFG_NB_THREADMAP (NAVSS0_NBSS_NB1_CFG_MMRS + 0x10) +/* + * Thread Map for North Bridge Configuration + * Each bit is for each VBUSM source. + * Bit[0] maps orderID 0-3 to VBUSM.C thread number + * Bit[1] maps orderID 4-9 to VBUSM.C thread number + * Bit[2] maps orderID 10-15 to VBUSM.C thread number + * When bit has value 0: VBUSM.C thread 0 (non-real time traffic) + * When bit has value 1: VBUSM.C thread 2 (real time traffic) + */ +#define NB_THREADMAP_BIT0 BIT(0) +#define NB_THREADMAP_BIT1 BIT(1) +#define NB_THREADMAP_BIT2 BIT(2) + struct fwl_data cbass_hc_cfg0_fwls[] = { { "PCIE0_CFG", 2577, 7 }, { "EMMC8SS0_CFG", 2579, 4 }, @@ -123,6 +141,13 @@ void k3_mmc_restart_clock(void) } } +/* Setup North Bridge registers to map ORDERID 10-15 to RT traffic */ +static void setup_navss_nb(void) +{ + writel(NB_THREADMAP_BIT1, (uintptr_t)NAVSS0_NBSS_NB0_CFG_NB_THREADMAP); + writel(NB_THREADMAP_BIT2, (uintptr_t)NAVSS0_NBSS_NB1_CFG_NB_THREADMAP); +} + /* * This uninitialized global variable would normal end up in the .bss section, * but the .bss is cleared between writing and reading this variable, so move @@ -295,6 +320,11 @@ void board_init_f(ulong dummy) do_dt_magic(); #endif k3_mem_init(); + + if (IS_ENABLED(CONFIG_CPU_V7R)) + setup_navss_nb(); + + setup_qos(); } #endif diff --git a/arch/arm/mach-k3/r5/j721s2/Makefile b/arch/arm/mach-k3/r5/j721s2/Makefile index 8588c5e4c3..89c0284b56 100644 --- a/arch/arm/mach-k3/r5/j721s2/Makefile +++ b/arch/arm/mach-k3/r5/j721s2/Makefile @@ -3,3 +3,4 @@ # Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ obj-y += clk-data.o obj-y += dev-data.o +obj-y += j721s2_qos_uboot.o diff --git a/arch/arm/mach-k3/r5/j721s2/j721s2_qos.h b/arch/arm/mach-k3/r5/j721s2/j721s2_qos.h new file mode 100644 index 0000000000..ab3e4773a4 --- /dev/null +++ b/arch/arm/mach-k3/r5/j721s2/j721s2_qos.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Keystone3 Quality of service endpoint definitions + * Auto generated by K3 Resource Partitioning Tool + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#define SMS_WKUP_0_TIFS_VBUSP_M 0x45D00000 +#define SMS_WKUP_0_HSM_VBUSP_M 0x45D00400 +#define PULSAR_SL_MCU_0_CPU0_RMST 0x45D10000 +#define PULSAR_SL_MCU_0_CPU0_WMST 0x45D10400 +#define PULSAR_SL_MCU_0_CPU0_PMST 0x45D10800 +#define PULSAR_SL_MCU_0_CPU1_RMST 0x45D11000 +#define PULSAR_SL_MCU_0_CPU1_WMST 0x45D11400 +#define PULSAR_SL_MCU_0_CPU1_PMST 0x45D11800 +#define SA3SS_AM62_MCU_0_CTXCACH_EXT_DMA 0x45D13000 +#define PULSAR_SL_MAIN_0_PBDG_RMST0 0x45D78000 +#define PULSAR_SL_MAIN_0_PBDG_WMST0 0x45D78400 +#define PULSAR_SL_MAIN_0_PBDG_RMST1 0x45D78800 +#define PULSAR_SL_MAIN_0_PBDG_WMST1 0x45D78C00 +#define EMMCSD4SS_MAIN_0_EMMCSDSS_RD 0x45D82800 +#define EMMCSD4SS_MAIN_0_EMMCSDSS_WR 0x45D82C00 +#define COMPUTE_CLUSTER_J7AHP_MAIN_0_GIC_MEM_RD_VBUSM 0x45D86000 +#define COMPUTE_CLUSTER_J7AHP_MAIN_0_GIC_MEM_WR_VBUSM 0x45D86400 +#define PCIE_G3X4_128_MAIN_0_PCIE_MST_RD 0x45D98400 +#define PCIE_G3X4_128_MAIN_0_PCIE_MST_WR 0x45D98C00 +#define PCIE_G3X4_128_MAIN_1_PCIE_MST_RD 0x45D99400 +#define PCIE_G3X4_128_MAIN_1_PCIE_MST_WR 0x45D99C00 +#define USB3P0SS_16FFC_MAIN_0_MSTR0 0x45D9A000 +#define USB3P0SS_16FFC_MAIN_0_MSTW0 0x45D9A400 +#define UFSHCI2P1SS_16FFC_MAIN_0_UFSHCI_VBM_MST_RD 0x45D9AC00 +#define UFSHCI2P1SS_16FFC_MAIN_0_UFSHCI_VBM_MST_WR 0x45D9B000 +#define EMMC8SS_16FFC_MAIN_0_EMMCSS_WR 0x45D9B400 +#define EMMC8SS_16FFC_MAIN_0_EMMCSS_RD 0x45D9B800 +#define SA2_UL_MAIN_0_CTXCACH_EXT_DMA 0x45D9BC00 +#define VUSR_DUAL_MAIN_0_V0_M 0x45D9C000 +#define VUSR_DUAL_MAIN_0_V1_M 0x45D9C400 +#define DEBUGSS_K3_WRAP_CV0_MAIN_0_VBUSMR 0x45DA0000 +#define DEBUGSS_K3_WRAP_CV0_MAIN_0_VBUSMW 0x45DA0400 +#define PULSAR_SL_MAIN_1_CPU0_RMST 0x45DA8000 +#define PULSAR_SL_MAIN_1_CPU0_WMST 0x45DA8400 +#define PULSAR_SL_MAIN_1_CPU1_RMST 0x45DA8800 +#define PULSAR_SL_MAIN_1_CPU1_WMST 0x45DA8C00 +#define PULSAR_SL_MAIN_2_CPU0_RMST 0x45DA9000 +#define PULSAR_SL_MAIN_2_CPU0_WMST 0x45DA9400 +#define PULSAR_SL_MAIN_2_CPU1_RMST 0x45DA9800 +#define PULSAR_SL_MAIN_2_CPU1_WMST 0x45DA9C00 +#define DMPAC_TOP_MAIN_0_DATA_MST 0x45DC0000 +#define K3_VPU_WAVE521CL_MAIN_0_SEC_M_VBUSM_R_ASYNC 0x45DC0C00 +#define K3_VPU_WAVE521CL_MAIN_0_SEC_M_VBUSM_W_ASYNC 0x45DC1000 +#define VPAC_TOP_MAIN_0_DATA_MST_0 0x45DC1400 +#define VPAC_TOP_MAIN_0_DATA_MST_1 0x45DC1800 +#define VPAC_TOP_MAIN_0_LDC0_M_MST 0x45DC1C00 +#define K3_DSS_MAIN_0_DSS_INST0_VBUSM_DMA 0x45DC2000 +#define K3_DSS_MAIN_0_DSS_INST0_VBUSM_FBDC 0x45DC2400 +#define VPAC_TOP_MAIN_1_LDC0_M_MST 0x45DC2800 +#define VPAC_TOP_MAIN_1_DATA_MST_0 0x45DC2C00 +#define VPAC_TOP_MAIN_1_DATA_MST_1 0x45DC3000 +#define K3_VPU_WAVE521CL_MAIN_0_PRI_M_VBUSM_R_ASYNC 0x45DC3400 +#define K3_VPU_WAVE521CL_MAIN_0_PRI_M_VBUSM_W_ASYNC 0x45DC3800 +#define K3_VPU_WAVE521CL_MAIN_1_SEC_M_VBUSM_R_ASYNC 0x45DC3C00 +#define K3_VPU_WAVE521CL_MAIN_1_SEC_M_VBUSM_W_ASYNC 0x45DC4000 +#define K3_VPU_WAVE521CL_MAIN_1_PRI_M_VBUSM_R_ASYNC 0x45DC4400 +#define K3_VPU_WAVE521CL_MAIN_1_PRI_M_VBUSM_W_ASYNC 0x45DC4800 +#define J7AEP_GPU_BXS464_WRAP_MAIN_0_M_VBUSM_R_SYNC 0x45DC5000 +#define J7AEP_GPU_BXS464_WRAP_MAIN_0_M_VBUSM_W_SYNC 0x45DC5800 +#define PULSAR_SL_MAIN_0_CPU0_RMST 0x45DC8000 +#define PULSAR_SL_MAIN_0_CPU0_WMST 0x45DC8400 +#define PULSAR_SL_MAIN_0_CPU1_RMST 0x45DC8800 +#define PULSAR_SL_MAIN_0_CPU1_WMST 0x45DC8C00 +#define PULSAR_SL_MAIN_1_PBDG_RMST0 0x45DCA000 +#define PULSAR_SL_MAIN_1_PBDG_WMST0 0x45DCA400 +#define PULSAR_SL_MAIN_1_PBDG_RMST1 0x45DCA800 +#define PULSAR_SL_MAIN_1_PBDG_WMST1 0x45DCAC00 +#define PULSAR_SL_MAIN_2_PBDG_RMST0 0x45DCB000 +#define PULSAR_SL_MAIN_2_PBDG_WMST0 0x45DCB400 +#define PULSAR_SL_MAIN_2_PBDG_RMST1 0x45DCB800 +#define PULSAR_SL_MAIN_2_PBDG_WMST1 0x45DCBC00 diff --git a/arch/arm/mach-k3/r5/j721s2/j721s2_qos_uboot.c b/arch/arm/mach-k3/r5/j721s2/j721s2_qos_uboot.c new file mode 100644 index 0000000000..54d81d929a --- /dev/null +++ b/arch/arm/mach-k3/r5/j721s2/j721s2_qos_uboot.c @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * j721s2 Quality of Service (QoS) Configuration Data + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include +#include "j721s2_qos.h" + +struct k3_qos_data qos_data[] = { + /* DSS_PIPE_VID1 - 2 endpoints, 2 channels */ + { + .reg = K3_QOS_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_DMA, 0), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_DMA, 1), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_FBDC, 0), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_FBDC, 1), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + + /* DSS_PIPE_VIDL1 - 2 endpoints, 2 channels */ + { + .reg = K3_QOS_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_DMA, 2), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_DMA, 3), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_FBDC, 2), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_FBDC, 3), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + + /* DSS_PIPE_VID2 - 2 endpoints, 2 channels */ + { + .reg = K3_QOS_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_DMA, 4), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_DMA, 5), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_FBDC, 4), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_FBDC, 5), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + + /* DSS_PIPE_VIDL2 - 2 endpoints, 2 channels */ + { + .reg = K3_QOS_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_DMA, 6), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_DMA, 7), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_FBDC, 6), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + { + .reg = K3_QOS_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_FBDC, 7), + .val = K3_QOS_VAL(0, 15, 0, 0, 0, 0), + }, + + /* Following registers set 1:1 mapping for orderID MAP1/MAP2 + * remap registers. orderID x is remapped to orderID x again + * This is to ensure orderID from MAP register is unchanged + */ + + /* K3_DSS_MAIN_0_DSS_INST0_VBUSM_DMA - 1 groups */ + { + .reg = K3_QOS_GROUP_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_DMA, 0), + .val = K3_QOS_GROUP_DEFAULT_VAL_LOW, + }, + { + .reg = K3_QOS_GROUP_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_DMA, 1), + .val = K3_QOS_GROUP_DEFAULT_VAL_HIGH, + }, + + /* K3_DSS_MAIN_0_DSS_INST0_VBUSM_FBDC - 1 groups */ + { + .reg = K3_QOS_GROUP_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_FBDC, 0), + .val = K3_QOS_GROUP_DEFAULT_VAL_LOW, + }, + { + .reg = K3_QOS_GROUP_REG(K3_DSS_MAIN_0_DSS_INST0_VBUSM_FBDC, 1), + .val = K3_QOS_GROUP_DEFAULT_VAL_HIGH, + }, +}; + +u32 qos_count = ARRAY_SIZE(qos_data);