From: Jacky Chou <jacky_chou@aspeedtech.com>
Date: Fri, 28 Jun 2024 07:14:45 +0000 (+0800)
Subject: net: ftgmac100: Fixed NC-SI PHY device cannot get
X-Git-Tag: v2025.01-rc5-pxa1908~170^2~51^2~11
X-Git-Url: http://git.dujemihanovic.xyz/img/%7B%7B?a=commitdiff_plain;h=a0f4e43c59ad046f5d09f1a96aa8dec35c963cfc;p=u-boot.git

net: ftgmac100: Fixed NC-SI PHY device cannot get

The NC-SI interface does not need the MDIO bus and the
NC-SI PHY device cannot get from dm_eth_phy_connect.
Therefore, use phy_connect directly here.

Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
---

diff --git a/drivers/net/ftgmac100.c b/drivers/net/ftgmac100.c
index 853a9913d2..392016141c 100644
--- a/drivers/net/ftgmac100.c
+++ b/drivers/net/ftgmac100.c
@@ -222,7 +222,7 @@ static int ftgmac100_phy_init(struct udevice *dev)
 	struct phy_device *phydev;
 	int ret;
 
-	if (IS_ENABLED(CONFIG_DM_MDIO))
+	if (IS_ENABLED(CONFIG_DM_MDIO) && priv->phy_mode != PHY_INTERFACE_MODE_NCSI)
 		phydev = dm_eth_phy_connect(dev);
 	else
 		phydev = phy_connect(priv->bus, priv->phy_addr, dev, priv->phy_mode);