From: Tom Rini Date: Fri, 12 Jul 2024 19:07:54 +0000 (-0600) Subject: Merge patch series "Add Turris 1.x board" X-Git-Url: http://git.dujemihanovic.xyz/img/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=246a0ce1e17358c4a08579dfca9b33c179a3a928;p=u-boot.git Merge patch series "Add Turris 1.x board" Marek Mojík says: Hello all, this is a continuation of previous work by Pali to add support for the Turris 1.x board. As the patches were based on u-boot v2022.04, a nontrivial rebasing was needed. Some notes: - Some options that are in SD defconfig are disabled in NOR defconfig because over the years u-boot grew and the old NOR defconfig will not fit into NOR memory. - SD boot with RAM larger than 2GB will only allocate 2GB of RAM (We were not able to fix this yet) --- 246a0ce1e17358c4a08579dfca9b33c179a3a928 diff --cc board/CZ.NIC/turris_1x/Kconfig index 0000000000,f55dfa14bc..baea4d80d1 mode 000000,100644..100644 --- a/board/CZ.NIC/turris_1x/Kconfig +++ b/board/CZ.NIC/turris_1x/Kconfig @@@ -1,0 -1,155 +1,155 @@@ + # SPDX-License-Identifier: GPL-2.0+ + # (C) 2022 Pali Rohár + + if TARGET_TURRIS_1X + + # Board identification + config SYS_BOARD + default "turris_1x" + config SYS_VENDOR + default "CZ.NIC" + config SYS_CONFIG_NAME + default "turris_1x" + config DEFAULT_DEVICE_TREE + default "turris1x" + + # Board functions + config ATSHA204A + default y + config BOARD_EARLY_INIT_F + default y + config BOARD_EARLY_INIT_R + default y + config LAST_STAGE_INIT + default y + config MISC + default y + config OF_BOARD_FIXUP + default y + config OF_BOARD_SETUP + default y + + # ENV + config ENV_SIZE + default 0x2000 + config ENV_SECT_SIZE + default 0x20000 + config ENV_OVERWRITE + default y + config ENV_IS_IN_FLASH + default y + config ENV_ADDR + default 0xeff20000 # in NOR + config SYS_RELOC_GD_ENV_ADDR + default y + + # DDR + config DDR_CLK_FREQ + default 66666666 + config NR_DRAM_BANKS + default 5 + + # UART + config DEBUG_UART_BASE + default 0xffe04500 if DEBUG_UART + config DEBUG_UART_CLOCK + default 37500000 if DEBUG_UART + config SYS_NS16550 + default y + + # I2C + config I2C_SET_DEFAULT_BUS_NUM + default y + config SYS_FSL_I2C_OFFSET + default 0x3000 + config SYS_FSL_HAS_I2C2_OFFSET + default y + config SYS_FSL_I2C2_OFFSET + default 0x3100 + config SYS_I2C_FSL + default y + + # GPIO + config MPC8XXX_GPIO + default y + + # WDT + config WDT_MAX6370 + default y + + # PCIe + config PCI_INIT_R + default y + config PCIE_FSL + default y + + # Ethernet + config MII + default y + config PHY_FIXED + default y + config TSEC_ENET + default y + + # USB + config USB_EHCI_FSL + default y + config USB_XHCI_HCD + default y + config USB_XHCI_PCI + default y + + # SDHC + config FSL_ESDHC + default y + config SYS_FSL_ESDHC_DEFAULT_BUS_WIDTH + default 4 + + # NOR + config MTD_NOR_FLASH + default y + config CFI_FLASH + default y + config FLASH_CFI_MTD + default y + config SYS_FLASH_USE_BUFFER_WRITE + default y + + # NAND + config MTD_RAW_NAND + default y + config NAND_FSL_ELBC + default y + config NAND_FSL_ELBC_DT + default y + config BCH + default y + config SYS_FLASH_CFI + default y + config NAND_ECC_BCH + default y -endif - + config SYS_LOAD_ADDR + default 0x1000000 + + if SPL + + config SPL_ENV_SUPPORT + default y + config SPL_FRAMEWORK + default n + config SPL_I2C + default y + config SPL_LIBCOMMON_SUPPORT + default y + config SPL_LIBGENERIC_SUPPORT + default y + config SPL_MPC8XXX_INIT_DDR + default y + config SPL_SERIAL + default y + config SPL_SYS_I2C_LEGACY + default y + + endif ++ ++endif