From: Marek Vasut Date: Sun, 17 Sep 2023 14:13:04 +0000 (+0200) Subject: ARM: dts: renesas: Synchronize R-Car R8A77951 H3 DTs with Linux 6.5.3 X-Git-Url: http://git.dujemihanovic.xyz/img/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=f984d3889c5e91a414a180e6ed0cf7d015b50593;p=u-boot.git ARM: dts: renesas: Synchronize R-Car R8A77951 H3 DTs with Linux 6.5.3 Synchronize R-Car R8A77951 H3 DTs with Linux 6.5.3, commit 238589d0f7b421aae18c5704dc931595019fa6c7 . Signed-off-by: Marek Vasut --- diff --git a/arch/arm/dts/r8a77951.dtsi b/arch/arm/dts/r8a77951.dtsi index 07c8763c1e..6d15229d25 100644 --- a/arch/arm/dts/r8a77951.dtsi +++ b/arch/arm/dts/r8a77951.dtsi @@ -75,7 +75,6 @@ opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <900000>; clock-latency-ns = <300000>; - turbo-mode; }; opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; @@ -1998,7 +1997,7 @@ rcar_sound: sound@ec500000 { /* - * #sound-dai-cells is required + * #sound-dai-cells is required if simple-card * * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; @@ -2779,8 +2778,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = , , ; @@ -2791,6 +2790,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 319>; + iommu-map = <0 &ipmmu_hc 0 1>; + iommu-map-mask = <0>; status = "disabled"; }; @@ -2806,8 +2807,8 @@ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = , , ; @@ -2818,6 +2819,8 @@ clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 318>; + iommu-map = <0 &ipmmu_hc 1 1>; + iommu-map-mask = <0>; status = "disabled"; }; diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi index 23fdd1115b..4a3d503782 100644 --- a/arch/arm/dts/salvator-common.dtsi +++ b/arch/arm/dts/salvator-common.dtsi @@ -33,9 +33,20 @@ / { aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c_dvfs; serial0 = &scif2; serial1 = &hscif1; ethernet0 = &avb; + mmc0 = &sdhi2; + mmc1 = &sdhi0; + mmc2 = &sdhi3; }; chosen { @@ -94,6 +105,7 @@ port { hdmi0_con: endpoint { + remote-endpoint = <&rcar_dw_hdmi0_out>; }; }; }; @@ -166,7 +178,7 @@ }; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -175,7 +187,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -184,7 +196,7 @@ regulator-always-on; }; - reg_12v: regulator2 { + reg_12v: regulator-12v { compatible = "regulator-fixed"; regulator-name = "fixed-12V"; regulator-min-microvolt = <12000000>; @@ -198,7 +210,12 @@ label = "rcar-sound"; - dais = <&rsnd_port0>; + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ +#ifdef SOC_HAS_HDMI1 + &rsnd_port2 /* HDMI1 */ +#endif + >; }; vbus0_usb2: regulator-vbus0-usb2 { @@ -316,6 +333,10 @@ }; }; +&a57_0 { + cpu-supply = <&dvfs>; +}; + &audio_clk_a { clock-frequency = <22579200>; }; @@ -324,7 +345,7 @@ pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; phy-handle = <&phy0>; - phy-mode = "rgmii-txid"; + tx-internal-delay-ps = <2000>; status = "okay"; phy0: ethernet-phy@0 { @@ -343,7 +364,6 @@ ports { port@0 { - reg = <0>; csi20_in: endpoint { clock-lanes = <0>; data-lanes = <1>; @@ -358,8 +378,6 @@ ports { port@0 { - reg = <0>; - csi40_in: endpoint { clock-lanes = <0>; data-lanes = <1 2 3 4>; @@ -376,7 +394,7 @@ ports { port@0 { - endpoint { + du_out_rgb: endpoint { remote-endpoint = <&adv7123_in>; }; }; @@ -396,6 +414,50 @@ clock-frequency = <32768>; }; +&hdmi0 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint1>; + }; + }; + }; +}; + +#ifdef SOC_HAS_HDMI1 +&hdmi1 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi1_out: endpoint { + remote-endpoint = <&hdmi1_con>; + }; + }; + port@2 { + reg = <2>; + dw_hdmi1_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint2>; + }; + }; + }; +}; + +&hdmi1_con { + remote-endpoint = <&rcar_dw_hdmi1_out>; +}; +#endif /* SOC_HAS_HDMI1 */ + &hscif1 { pinctrl-0 = <&hscif1_pins>; pinctrl-names = "default"; @@ -469,47 +531,49 @@ reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", "infoframe", "cbus", "cec", "sdp", "txa", "txb" ; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio6>; interrupt-names = "intrq1", "intrq2"; interrupts = <30 IRQ_TYPE_LEVEL_LOW>, <31 IRQ_TYPE_LEVEL_LOW>; - port@7 { - reg = <7>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; - adv7482_ain7: endpoint { - remote-endpoint = <&cvbs_con>; + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_con>; + }; }; - }; - port@8 { - reg = <8>; + port@8 { + reg = <8>; - adv7482_hdmi: endpoint { - remote-endpoint = <&hdmi_in_con>; + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in_con>; + }; }; - }; - port@a { - reg = <10>; + port@a { + reg = <10>; - adv7482_txa: endpoint { - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csi40_in>; + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; }; - }; - port@b { - reg = <11>; + port@b { + reg = <11>; - adv7482_txb: endpoint { - clock-lanes = <0>; - data-lanes = <1>; - remote-endpoint = <&csi20_in>; + adv7482_txb: endpoint { + clock-lanes = <0>; + data-lanes = <1>; + remote-endpoint = <&csi20_in>; + }; }; }; }; @@ -732,12 +796,9 @@ }; &rcar_sound { - pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; pinctrl-names = "default"; - /* Single DAI */ - #sound-dai-cells = <0>; - /* audio_clkout0/1/2/3 */ #clock-cells = <1>; clock-frequency = <12288000 11289600>; @@ -775,8 +836,85 @@ bitclock-master = <&rsnd_endpoint0>; frame-master = <&rsnd_endpoint0>; - playback = <&ssi0 &src0 &dvc0>; - capture = <&ssi1 &src1 &dvc1>; + playback = <&ssi0>, <&src0>, <&dvc0>; + capture = <&ssi1>, <&src1>, <&dvc1>; + }; + }; + + rsnd_port1: port@1 { + reg = <1>; + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint1>; + frame-master = <&rsnd_endpoint1>; + + playback = <&ssi2>; + }; + }; + +#ifdef SOC_HAS_HDMI1 + rsnd_port2: port@2 { + reg = <2>; + rsnd_endpoint2: endpoint { + remote-endpoint = <&dw_hdmi1_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint2>; + frame-master = <&rsnd_endpoint2>; + + playback = <&ssi3>; + }; + }; +#endif /* SOC_HAS_HDMI1 */ + }; +}; + +&rpc { + /* Left disabled. To be enabled by firmware when unlocked. */ + + flash@0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + bl2@40000 { + reg = <0x00040000 0x140000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x040000>; + read-only; + }; + tee@200000 { + reg = <0x00200000 0x440000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x100000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; }; }; }; @@ -787,6 +925,12 @@ status = "okay"; }; +#ifdef SOC_HAS_SATA +&sata { + status = "okay"; +}; +#endif /* SOC_HAS_SATA */ + &scif1 { pinctrl-0 = <&scif1_pins>; pinctrl-names = "default"; @@ -833,8 +977,11 @@ bus-width = <8>; mmc-hs200-1_8v; mmc-hs400-1_8v; + no-sd; + no-sdio; non-removable; fixed-emmc-driver-type = <1>; + full-pwr-cycle-in-suspend; status = "okay"; }; @@ -931,3 +1078,27 @@ status = "okay"; }; + +#ifdef SOC_HAS_USB2_CH2 +&ehci2 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&pfc { + usb2_pins: usb2 { + groups = "usb2"; + function = "usb2"; + }; +}; + +&usb2_phy2 { + pinctrl-0 = <&usb2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; +#endif /* SOC_HAS_USB2_CH2 */ diff --git a/arch/arm/dts/salvator-xs.dtsi b/arch/arm/dts/salvator-xs.dtsi index 717d42758c..08b925624e 100644 --- a/arch/arm/dts/salvator-xs.dtsi +++ b/arch/arm/dts/salvator-xs.dtsi @@ -27,3 +27,59 @@ clock-names = "xin"; }; }; + +#ifdef SOC_HAS_SATA +&pca9654 { + pcie-sata-switch-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-low; /* enable SATA by default */ + line-name = "PCIE/SATA switch"; + }; +}; + +/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ +#endif /* SOC_HAS_SATA */ + +#ifdef SOC_HAS_USB2_CH3 +&ehci3 { + dr_mode = "otg"; + status = "okay"; +}; + +&hsusb3 { + dr_mode = "otg"; + status = "okay"; +}; + +&ohci3 { + dr_mode = "otg"; + status = "okay"; +}; + +&pfc { + /* + * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins + * (when SW31 is the default setting on Salvator-XS). + * - If SW31 is the default setting, you cannot use USB2.0 ch3 on + * r8a77951 with Salvator-XS. + * Hence the SW31 setting must be changed like 2) below. + * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF: + * - Connect GP6_3[01] to ADV7842. + * 2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON: + * - Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power). + * - Connect GP6_{04,21} to ADV7842. + */ + usb2_ch3_pins: usb2_ch3 { + groups = "usb2_ch3"; + function = "usb2_ch3"; + }; +}; + +&usb2_phy3 { + pinctrl-0 = <&usb2_ch3_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; +#endif /* SOC_HAS_USB2_CH3 */ diff --git a/arch/arm/dts/ulcb-audio-graph-card.dtsi b/arch/arm/dts/ulcb-audio-graph-card.dtsi new file mode 100644 index 0000000000..3be54df645 --- /dev/null +++ b/arch/arm/dts/ulcb-audio-graph-card.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for ULCB + Audio Graph Card + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/* + * (A) CPU0 <-----> ak4613 + * (B) CPU1 -----> HDMI + * + * (A) aplay -D plughw:0,0 xxx.wav + * (B) aplay -D plughw:0,1 xxx.wav + * + * (A) arecord -D plughw:0,0 xxx.wav + */ + +/ { + sound_card: sound { + compatible = "audio-graph-card"; + label = "rcar-sound"; + + dais = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */ + &rsnd_port1 /* (B) CPU1 -> HDMI */ + >; + }; +}; + +&ak4613 { + #sound-dai-cells = <0>; + + port { + /* + * (A) CPU0 <-> ak4613 + */ + ak4613_endpoint: endpoint { + remote-endpoint = <&rsnd_for_ak4613>; + }; + }; +}; + +&hdmi0 { + ports { + port@2 { + /* + * (B) CPU1 -> HDMI + */ + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_for_hdmi>; + }; + }; + }; +}; + +&rcar_sound { + ports { + #address-cells = <1>; + #size-cells = <0>; + rsnd_port0: port@0 { + /* + * (A) CPU0 <-> ak4613 + */ + reg = <0>; + rsnd_for_ak4613: endpoint { + remote-endpoint = <&ak4613_endpoint>; + bitclock-master; + frame-master; + playback = <&ssi0>, <&src0>, <&dvc0>; + capture = <&ssi1>, <&src1>, <&dvc1>; + }; + }; + rsnd_port1: port@1 { + /* + * (B) CPU1 -> HDMI + */ + reg = <1>; + rsnd_for_hdmi: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + bitclock-master; + frame-master; + playback = <&ssi2>; + }; + }; + }; +}; diff --git a/arch/arm/dts/ulcb-audio-graph-card2.dtsi b/arch/arm/dts/ulcb-audio-graph-card2.dtsi new file mode 100644 index 0000000000..5ebec12358 --- /dev/null +++ b/arch/arm/dts/ulcb-audio-graph-card2.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for ULCB + Audio Graph Card2 + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/* + * (A) CPU0 <----> ak4613 + * (B) CPU1 ----> HDMI + * + * (A) aplay -D plughw:0,0 xxx.wav + * (B) aplay -D plughw:0,1 xxx.wav + * + * (A) arecord -D plughw:0,0 xxx.wav + */ +#include "ulcb-audio-graph-card.dtsi" + +&sound_card { + compatible = "audio-graph-card2"; + + /delete-property/ dais; + links = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */ + &rsnd_port1 /* (B) CPU1 -> HDMI */ + >; +}; diff --git a/arch/arm/dts/ulcb.dtsi b/arch/arm/dts/ulcb.dtsi index 29cedf4dc1..0be2716659 100644 --- a/arch/arm/dts/ulcb.dtsi +++ b/arch/arm/dts/ulcb.dtsi @@ -6,14 +6,6 @@ * Copyright (C) 2016 Cogent Embedded, Inc. */ -/* - * SSI-AK4613 - * aplay -D plughw:0,0 xxx.wav - * arecord -D plughw:0,0 xxx.wav - * SSI-HDMI - * aplay -D plughw:0,1 xxx.wav - */ - #include #include @@ -102,15 +94,6 @@ regulator-always-on; }; - sound_card: sound { - compatible = "audio-graph-card2"; - label = "rcar-sound"; - - links = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - >; - }; - vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -201,9 +184,6 @@ }; port@2 { reg = <2>; - dw_hdmi0_snd_in: endpoint { - remote-endpoint = <&rsnd_for_hdmi>; - }; }; }; }; @@ -218,7 +198,6 @@ ak4613: codec@10 { compatible = "asahi-kasei,ak4613"; - #sound-dai-cells = <0>; reg = <0x10>; clocks = <&rcar_sound 3>; @@ -230,12 +209,6 @@ asahi-kasei,out4-single-end; asahi-kasei,out5-single-end; asahi-kasei,out6-single-end; - - port { - ak4613_endpoint: endpoint { - remote-endpoint = <&rsnd_for_ak4613>; - }; - }; }; cs2000: clk-multiplier@4f { @@ -294,6 +267,12 @@ }; }; }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; }; &ohci1 { @@ -381,9 +360,6 @@ pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; pinctrl-names = "default"; - /* Single DAI */ - #sound-dai-cells = <0>; - /* audio_clkout0/1/2/3 */ #clock-cells = <1>; clock-frequency = <12288000 11289600>; @@ -408,30 +384,6 @@ <&audio_clk_a>, <&cs2000>, <&audio_clk_c>, <&cpg CPG_CORE CPG_AUDIO_CLK_I>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - rsnd_port0: port@0 { - reg = <0>; - rsnd_for_ak4613: endpoint { - remote-endpoint = <&ak4613_endpoint>; - bitclock-master; - frame-master; - playback = <&ssi0>, <&src0>, <&dvc0>; - capture = <&ssi1>, <&src1>, <&dvc1>; - }; - }; - rsnd_port1: port@1 { - reg = <1>; - rsnd_for_hdmi: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; - bitclock-master; - frame-master; - playback = <&ssi2>; - }; - }; - }; }; &rpc { @@ -541,3 +493,17 @@ status = "okay"; }; + + +/* + * For sound-test. + * + * We can switch Audio Card for testing + * + * #include "ulcb-simple-audio-card.dtsi" + * #include "ulcb-simple-audio-card-mix+split.dtsi" + * #include "ulcb-audio-graph-card.dtsi" + * #include "ulcb-audio-graph-card-mix+split.dtsi" + * #include "ulcb-audio-graph-card2-mix+split.dtsi" + */ +#include "ulcb-audio-graph-card2.dtsi"