From: Chia-Wei Wang Date: Tue, 10 Sep 2024 09:39:16 +0000 (+0800) Subject: riscv: Add AST2700 SoC initial platform support X-Git-Url: http://git.dujemihanovic.xyz/img/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=9efcb10a09d69d9cf14111dd452bbf54dc0502b4;p=u-boot.git riscv: Add AST2700 SoC initial platform support AST2700 SoCs integrates a Ibex 32-bits RISC-V core as the boot MCU for the first stage bootloader execution, namely SPL. This patch implements the preliminary base to successfully run SPL on this RV32-based MCU to the console banner message. Signed-off-by: Chia-Wei Wang Reviewed-by: Leo Yu-Chi Liang --- diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index d0476f975c..6b854cc0b6 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -46,6 +46,9 @@ config TARGET_TH1520_LPI4A config TARGET_XILINX_MBV bool "Support AMD/Xilinx MicroBlaze V" +config TARGET_ASPEED_AST2700_IBEX + bool "Support Ibex RISC-V cores on Aspeed AST2700 SoC" + endchoice config SYS_ICACHE_OFF @@ -81,6 +84,7 @@ config SPL_ZERO_MEM_BEFORE_USE # board-specific options below source "board/andestech/ae350/Kconfig" +source "board/aspeed/ibex_ast2700/Kconfig" source "board/emulation/qemu-riscv/Kconfig" source "board/microchip/mpfs_icicle/Kconfig" source "board/openpiton/riscv64/Kconfig" @@ -97,6 +101,7 @@ source "arch/riscv/cpu/andes/Kconfig" source "arch/riscv/cpu/cv1800b/Kconfig" source "arch/riscv/cpu/fu540/Kconfig" source "arch/riscv/cpu/fu740/Kconfig" +source "arch/riscv/cpu/ast2700/Kconfig" source "arch/riscv/cpu/generic/Kconfig" source "arch/riscv/cpu/jh7110/Kconfig" diff --git a/arch/riscv/cpu/ast2700/Kconfig b/arch/riscv/cpu/ast2700/Kconfig new file mode 100644 index 0000000000..b16f0fc7ca --- /dev/null +++ b/arch/riscv/cpu/ast2700/Kconfig @@ -0,0 +1,6 @@ +config RISCV_AST2700 + bool + imply CPU + imply CPU_RISCV + help + Run U-Boot on AST2700 with IBex RISC-V CPU integrated. diff --git a/arch/riscv/cpu/ast2700/Makefile b/arch/riscv/cpu/ast2700/Makefile new file mode 100644 index 0000000000..1f843c706a --- /dev/null +++ b/arch/riscv/cpu/ast2700/Makefile @@ -0,0 +1 @@ +obj-y += cpu.o diff --git a/arch/riscv/cpu/ast2700/cpu.c b/arch/riscv/cpu/ast2700/cpu.c new file mode 100644 index 0000000000..c1540546a9 --- /dev/null +++ b/arch/riscv/cpu/ast2700/cpu.c @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018, Bin Meng + * Copyright (C) 2024, Aspeed Technology Inc. + */ + +#include +#include + +/* + * cleanup_before_linux() is called just before we call linux + * it prepares the processor for linux + * + * we disable interrupt and caches. + */ +int cleanup_before_linux(void) +{ + disable_interrupts(); + + cache_flush(); + + return 0; +} diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile index 17cda483e1..c4c44057ba 100644 --- a/arch/riscv/dts/Makefile +++ b/arch/riscv/dts/Makefile @@ -11,6 +11,7 @@ dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb dtb-$(CONFIG_TARGET_STARFIVE_VISIONFIVE2) += jh7110-starfive-visionfive-2.dtb dtb-$(CONFIG_TARGET_TH1520_LPI4A) += th1520-lichee-pi-4a.dtb dtb-$(CONFIG_TARGET_XILINX_MBV) += xilinx-mbv32.dtb +dtb-$(CONFIG_TARGET_ASPEED_AST2700_IBEX) += ast2700-ibex.dtb include $(srctree)/scripts/Makefile.dts diff --git a/arch/riscv/dts/ast2700-ibex.dts b/arch/riscv/dts/ast2700-ibex.dts new file mode 100644 index 0000000000..f7a05e5771 --- /dev/null +++ b/arch/riscv/dts/ast2700-ibex.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "ast2700.dtsi" + +/ { + chosen { + stdout-path = &uart12; + tick-timer = &ast_ibex_timer; + }; + + memory@0 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; +}; + +&uart12 { + status = "okay"; + clock-frequency = <1846153>; +}; diff --git a/arch/riscv/dts/ast2700-u-boot.dtsi b/arch/riscv/dts/ast2700-u-boot.dtsi new file mode 100644 index 0000000000..ddc08a4bce --- /dev/null +++ b/arch/riscv/dts/ast2700-u-boot.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/ { + cpus { + bootph-all; + }; + + memory@80000000 { + bootph-all; + }; + + soc0: soc@12000000 { + bootph-all; + + sdrammc: sdrammc@12c00000 { + bootph-all; + }; + + syscon0: syscon@12c02000 { + bootph-all; + }; + }; + + soc1: soc@14000000 { + bootph-all; + + syscon1: syscon@14c02000 { + bootph-all; + }; + + uart12: serial@14c33b00 { + bootph-all; + }; + + ast_ibex_timer: timer { + bootph-all; + }; + }; + +}; diff --git a/arch/riscv/dts/ast2700.dtsi b/arch/riscv/dts/ast2700.dtsi new file mode 100644 index 0000000000..9b482dfdd8 --- /dev/null +++ b/arch/riscv/dts/ast2700.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/ { + model = "Aspeed AST2700 Ibex BootMCU"; + compatible = "aspeed,ast2700-ibex"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "lowrisc,ibex"; + device_type = "cpu"; + reg = <0>; + comptaible = "riscv"; + riscv,isa = "rv32imc"; + }; + }; + + memory@80000000 { + reg = <0x80000000 0x80000000>; + }; + + soc0: soc@12000000 { + compatible = "aspeed,soc1","simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sdrammc: sdrammc@12c00000 { + compatible = "aspeed,ast2700-sdrammc"; + reg = <0x12c00000 0x3000>, <0x13000000 0x1000>; + aspeed,scu0 = <&syscon0>; + aspeed,scu1 = <&syscon1>; + }; + + syscon0: syscon@12c02000 { + compatible = "aspeed,ast2700-scu0", "syscon", "simple-mfd"; + reg = <0x12c02000 0x1000>; + ranges = <0 0x12c02000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + soc1: soc@14000000 { + compatible = "aspeed,soc1","simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon1: syscon@14c02000 { + compatible = "aspeed,ast2700-scu1", "syscon", "simple-mfd"; + reg = <0x14c02000 0x1000>; + ranges = <0 0x14c02000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + uart12: serial@14c33b00 { + compatible = "ns16550a"; + reg = <0x14c33b00 0x20>; + reg-shift = <2>; + no-loopback-test; + clock-frequency = <1846153>; + status = "disabled"; + }; + + ast_ibex_timer: timer { + compatible = "aspeed,ast2700-ibex-timer"; + clock-frequency = <200000000>; + }; + }; +}; diff --git a/arch/riscv/include/asm/arch-ast2700/scu.h b/arch/riscv/include/asm/arch-ast2700/scu.h new file mode 100644 index 0000000000..1aa7d38bac --- /dev/null +++ b/arch/riscv/include/asm/arch-ast2700/scu.h @@ -0,0 +1,145 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) Aspeed Technology Inc. + */ +#ifndef __ASM_AST2700_SCU_H__ +#define __ASM_AST2700_SCU_H__ + +/* SCU0: CPU-die SCU */ +#define SCU0_HWSTRAP 0x010 +#define SCU0_HWSTRAP_DIS_RVAS BIT(30) +#define SCU0_HWSTRAP_DIS_WDTFULL BIT(25) +#define SCU0_HWSTRAP_DISARMICE_TZ BIT(22) +#define SCU0_HWSTRAP_DISABLE_XHCI BIT(21) +#define SCU0_HWSTRAP_BOOTEMMCSPEED BIT(20) +#define SCU0_HWSTRAP_VGA_CC BIT(18) +#define SCU0_HWSTRAP_EN_OPROM BIT(17) +#define SCU0_HWSTRAP_DISARMICE BIT(16) +#define SCU0_HWSTRAP_TSPRSNTSEL BIT(9) +#define SCU0_HWSTRAP_DISDEBUG BIT(8) +#define SCU0_HWSTRAP_HCLKHPLL BIT(7) +#define SCU0_HWSTRAP_HCLKSEL GENMASK(6, 5) +#define SCU0_HWSTRAP_CPUHPLL BIT(4) +#define SCU0_HWSTRAP_HPLLFREQ GENMASK(3, 2) +#define SCU0_HWSTRAP_BOOTSPI BIT(1) +#define SCU0_HWSTRAP_HWSTRAP_DISCPU BIT(0) +#define SCU0_DBGCTL 0x0c8 +#define SCU0_DBGCTL_MASK GENMASK(14, 0) +#define SCU0_DBGCTL_UARTDBG BIT(1) +#define SCU0_RSTCTL1 0x200 +#define SCU0_RSTCTL1_EMMC BIT(17) +#define SCU0_RSTCTL1_HACE BIT(4) +#define SCU0_RSTCTL1_CLR 0x204 +#define SCU0_RSTCTL1_CLR_EMMC BIT(17) +#define SCU0_RSTCTL1_CLR_HACE BIT(4) +#define SCU0_CLKGATE1 0x240 +#define SCU0_CLKGATE1_EMMC BIT(27) +#define SCU0_CLKGATE1_HACE BIT(13) +#define SCU0_CLKGATE1_DDRPHY BIT(11) +#define SCU0_CLKGATE1_CLR 0x244 +#define SCU0_CLKGATE1_CLR_EMMC BIT(27) +#define SCU0_CLKGATE1_CLR_HACE BIT(13) +#define SCU0_CLKGATE1_CLR_DDRPHY BIT(11) +#define SCU0_VGA0_SCRATCH 0x900 +#define SCU0_VGA0_SCRATCH_DRAM_INIT BIT(6) +#define SCU0_PCI_MISC70 0xa70 +#define SCU0_PCI_MISC70_EN_PCIEXHCI0 BIT(3) +#define SCU0_PCI_MISC70_EN_PCIEEHCI0 BIT(2) +#define SCU0_PCI_MISC70_EN_PCIEVGA0 BIT(0) +#define SCU0_PCI_MISC80 0xa80 +#define SCU0_PCI_MISC80_EN_PCIEXHCI1 BIT(3) +#define SCU0_PCI_MISC80_EN_PCIEEHCI1 BIT(2) +#define SCU0_PCI_MISC80_EN_PCIEVGA1 BIT(0) +#define SCU0_PCI_MISCF0 0xaf0 +#define SCU0_PCI_MISCF0_EN_PCIEXHCI1 BIT(3) +#define SCU0_PCI_MISCF0_EN_PCIEEHCI1 BIT(2) +#define SCU0_PCI_MISCF0_EN_PCIEVGA1 BIT(0) +#define SCU0_WPROT1 0xe04 +#define SCU0_WPROT1_0C8 BIT(18) + +/* SCU1: IO-die SCU */ +#define SCU1_REVISION 0x000 +#define SCU1_REVISION_HWID GENMASK(23, 16) +#define SCU1_REVISION_CHIP_EFUSE GENMASK(15, 8) +#define SCU1_HWSTRAP1 0x010 +#define SCU1_HWSTRAP1_DIS_CPTRA BIT(30) +#define SCU1_HWSTRAP1_RECOVERY_USB_PORT GENMASK(29, 28) +#define SCU1_HWSTRAP1_RECOVERY_INTERFACE GENMASK(27, 26) +#define SCU1_HWSTRAP1_RECOVERY_I3C (BIT(26) | BIT(27)) +#define SCU1_HWSTRAP1_RECOVERY_I2C BIT(27) +#define SCU1_HWSTRAP1_RECOVERY_USB BIT(26) +#define SCU1_HWSTRAP1_SPI_FLASH_4_BYTE_MODE BIT(25) +#define SCU1_HWSTRAP1_SPI_FLASH_WAIT_READY BIT(24) +#define SCU1_HWSTRAP1_BOOT_UFS BIT(23) +#define SCU1_HWSTRAP1_DIS_ROM BIT(22) +#define SCU1_HWSTRAP1_DIS_CPTRAJTAG BIT(20) +#define SCU1_HWSTRAP1_UARTDBGSEL BIT(19) +#define SCU1_HWSTRAP1_DIS_UARTDBG BIT(18) +#define SCU1_HWSTRAP1_DIS_WDTFULL BIT(17) +#define SCU1_HWSTRAP1_DISDEBUG1 BIT(16) +#define SCU1_HWSTRAP1_LTPI0_IO_DRIVING GENMASK(15, 14) +#define SCU1_HWSTRAP1_ACPI_1 BIT(13) +#define SCU1_HWSTRAP1_ACPI_0 BIT(12) +#define SCU1_HWSTRAP1_BOOT_EMMC_UFS BIT(11) +#define SCU1_HWSTRAP1_DDR4 BIT(10) +#define SCU1_HWSTRAP1_LOW_SECURE BIT(8) +#define SCU1_HWSTRAP1_EN_EMCS BIT(7) +#define SCU1_HWSTRAP1_EN_GPIOPT BIT(6) +#define SCU1_HWSTRAP1_EN_SECBOOT BIT(5) +#define SCU1_HWSTRAP1_EN_RECOVERY_BOOT BIT(4) +#define SCU1_HWSTRAP1_LTPI0_EN BIT(3) +#define SCU1_HWSTRAP1_LTPI_IDX BIT(2) +#define SCU1_HWSTRAP1_LTPI1_EN BIT(1) +#define SCU1_HWSTRAP1_LTPI_MODE BIT(0) +#define SCU1_HWSTRAP2 0x030 +#define SCU1_HWSTRAP2_FMC_ABR_SINGLE_FLASH BIT(29) +#define SCU1_HWSTRAP2_FMC_ABR_CS_SWAP_DIS BIT(28) +#define SCU1_HWSTRAP2_SPI_TPM_PCR_EXT_EN BIT(27) +#define SCU1_HWSTRAP2_SPI_TPM_HASH_ALGO GENMASK(26, 25) +#define SCU1_HWSTRAP2_BOOT_SPI_FREQ GENMASK(24, 23) +#define SCU1_HWSTRAP2_RESERVED GENMASK(22, 19) +#define SCU1_HWSTRAP2_FWSPI_CRTM GENMASK(18, 17) +#define SCU1_HWSTRAP2_EN_FWSPIAUX BIT(16) +#define SCU1_HWSTRAP2_FWSPISIZE GENMASK(15, 13) +#define SCU1_HWSTRAP2_DIS_REC BIT(12) +#define SCU1_HWSTRAP2_EN_CPTRA_DBG BIT(11) +#define SCU1_HWSTRAP2_TPM_PCR_INDEX GENMASK(6, 2) +#define SCU1_HWSTRAP2_ROM_CLEAR_SRAM BIT(1) +#define SCU1_HWSTRAP2_ABR BIT(0) +#define SCU1_RSTLOG0 0x050 +#define SCU1_RSTLOG0_BMC_CPU BIT(12) +#define SCU1_RSTLOG0_ABR BIT(2) +#define SCU1_RSTLOG0_EXTRSTN BIT(1) +#define SCU1_RSTLOG0_SRST BIT(0) +#define SCU1_MISC1 0x0c0 +#define SCU1_MISC1_UARTDBG_ROUTE GENMASK(23, 22) +#define SCU1_MISC1_UART12_ROUTE GENMASK(21, 20) +#define SCU1_DBGCTL 0x0c8 +#define SCU1_DBGCTL_MASK GENMASK(7, 0) +#define SCU1_DBGCTL_UARTDBG BIT(6) +#define SCU1_RNG_DATA 0x0f4 +#define SCU1_RSTCTL1 0x200 +#define SCU1_RSTCTL1_I3C(x) (BIT(16) << (x)) +#define SCU1_RSTCTL1_CLR 0x204 +#define SCU1_RSTCTL1_CLR_I3C(x) (BIT(16) << (x)) +#define SCU1_RSTCTL2 0x220 +#define SCU1_RSTCTL2_LTPI1 BIT(22) +#define SCU1_RSTCTL2_LTPI0 BIT(20) +#define SCU1_RSTCTL2_I2C BIT(15) +#define SCU1_RSTCTL2_CPTRA BIT(9) +#define SCU1_RSTCTL2_CLR 0x224 +#define SCU1_RSTCTL2_CLR_I2C BIT(15) +#define SCU1_RSTCTL2_CLR_CPTRA BIT(9) +#define SCU1_CLKGATE1 0x240 +#define SCU1_CLKGATE1_I3C(x) (BIT(16) << (x)) +#define SCU1_CLKGATE1_I2C BIT(15) +#define SCU1_CLKGATE1_CLR 0x244 +#define SCU1_CLKGATE1_CLR_I3C(x) (BIT(16) << (x)) +#define SCU1_CLKGATE1_CLR_I2C BIT(15) +#define SCU1_CLKGATE2 0x260 +#define SCU1_CLKGATE2_LTPI1_TX BIT(19) +#define SCU1_CLKGATE2_LTPI_AHB BIT(10) +#define SCU1_CLKGATE2_LTPI0_TX BIT(9) +#define SCU1_CLKGATE2_CLR 0x264 + +#endif diff --git a/arch/riscv/include/asm/arch-ast2700/sli.h b/arch/riscv/include/asm/arch-ast2700/sli.h new file mode 100644 index 0000000000..42f0f9ac93 --- /dev/null +++ b/arch/riscv/include/asm/arch-ast2700/sli.h @@ -0,0 +1,82 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) Aspeed Technology Inc. + */ +#ifndef __ASM_AST2700_SLI_H__ +#define __ASM_AST2700_SLI_H__ + +#define SLI_CPU_ADRBASE 0x12c17000 +#define SLI_IOD_ADRBASE 0x14c1e000 +#define SLIM_CPU_BASE (SLI_CPU_ADRBASE + 0x000) +#define SLIH_CPU_BASE (SLI_CPU_ADRBASE + 0x200) +#define SLIV_CPU_BASE (SLI_CPU_ADRBASE + 0x400) +#define SLIM_IOD_BASE (SLI_IOD_ADRBASE + 0x000) +#define SLIH_IOD_BASE (SLI_IOD_ADRBASE + 0x200) +#define SLIV_IOD_BASE (SLI_IOD_ADRBASE + 0x400) + +#define SLI_CTRL_I 0x00 +#define SLIV_RAW_MODE BIT(15) +#define SLI_TX_MODE BIT(14) +#define SLI_RX_PHY_LAH_SEL_REV BIT(13) +#define SLI_RX_PHY_LAH_SEL_NEG BIT(12) +#define SLI_AUTO_SEND_TRN_OFF BIT(8) +#define SLI_CLEAR_BUS BIT(6) +#define SLI_TRANS_EN BIT(5) +#define SLI_CLEAR_RX BIT(2) +#define SLI_CLEAR_TX BIT(1) +#define SLI_RESET_TRIGGER BIT(0) +#define SLI_CTRL_II 0x04 +#define SLI_CTRL_III 0x08 +#define SLI_CLK_SEL GENMASK(31, 28) +#define SLI_CLK_500M 0x6 +#define SLI_CLK_200M 0x3 +#define SLI_PHYCLK_SEL GENMASK(27, 24) +#define SLI_PHYCLK_25M 0x0 +#define SLI_PHYCLK_800M 0x1 +#define SLI_PHYCLK_400M 0x2 +#define SLI_PHYCLK_200M 0x3 +#define SLI_PHYCLK_788M 0x5 +#define SLI_PHYCLK_500M 0x6 +#define SLI_PHYCLK_250M 0x7 +#define SLIH_PAD_DLY_TX1 GENMASK(23, 18) +#define SLIH_PAD_DLY_TX0 GENMASK(17, 12) +#define SLIH_PAD_DLY_RX1 GENMASK(11, 6) +#define SLIH_PAD_DLY_RX0 GENMASK(5, 0) +#define SLIM_PAD_DLY_RX3 GENMASK(23, 18) +#define SLIM_PAD_DLY_RX2 GENMASK(17, 12) +#define SLIM_PAD_DLY_RX1 GENMASK(11, 6) +#define SLIM_PAD_DLY_RX0 GENMASK(5, 0) +#define SLI_CTRL_IV 0x0c +#define SLIM_PAD_DLY_TX3 GENMASK(23, 18) +#define SLIM_PAD_DLY_TX2 GENMASK(17, 12) +#define SLIM_PAD_DLY_TX1 GENMASK(11, 6) +#define SLIM_PAD_DLY_TX0 GENMASK(5, 0) +#define SLI_INTR_EN 0x10 +#define SLI_INTR_STATUS 0x14 +#define SLI_INTR_RX_SYNC BIT(15) +#define SLI_INTR_RX_ERR BIT(13) +#define SLI_INTR_RX_NACK BIT(12) +#define SLI_INTR_RX_TRAIN_PKT BIT(10) +#define SLI_INTR_RX_DISCONN BIT(6) +#define SLI_INTR_TX_SUSPEND BIT(4) +#define SLI_INTR_TX_TRAIN BIT(3) +#define SLI_INTR_TX_IDLE BIT(2) +#define SLI_INTR_RX_SUSPEND BIT(1) +#define SLI_INTR_RX_IDLE BIT(0) +#define SLI_INTR_RX_ERRORS \ + (SLI_INTR_RX_ERR | SLI_INTR_RX_NACK | SLI_INTR_RX_DISCONN) + +#define SLIM_MARB_FUNC_I 0x60 +#define SLIM_SLI_MARB_RR BIT(0) + +#define SLI_TARGET_PHYCLK SLI_PHYCLK_400M +#define SLIH_DEFAULT_DELAY 11 +#if (SLI_TARGET_PHYCLK == SLI_PHYCLK_800M) || (SLI_TARGET_PHYCLK == SLI_PHYCLK_788M) +#define SLIM_DEFAULT_DELAY 5 +#define SLIM_LAH_CONFIG 1 +#else +#define SLIM_DEFAULT_DELAY 12 +#define SLIM_LAH_CONFIG 0 +#endif +#endif +int sli_init(void); diff --git a/board/aspeed/ibex_ast2700/Kconfig b/board/aspeed/ibex_ast2700/Kconfig new file mode 100644 index 0000000000..469cea58d1 --- /dev/null +++ b/board/aspeed/ibex_ast2700/Kconfig @@ -0,0 +1,21 @@ +if TARGET_ASPEED_AST2700_IBEX + +config SYS_BOARD + default "ibex_ast2700" + +config SYS_VENDOR + default "aspeed" + +config SYS_CPU + default "ast2700" + +config SYS_CONFIG_NAME + default "ibex_ast2700" + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select RISCV_AST2700 + select SUPPORT_SPL + imply SPL_DRIVERS_MISC + +endif diff --git a/board/aspeed/ibex_ast2700/MAINTAINERS b/board/aspeed/ibex_ast2700/MAINTAINERS new file mode 100644 index 0000000000..777f582a20 --- /dev/null +++ b/board/aspeed/ibex_ast2700/MAINTAINERS @@ -0,0 +1,7 @@ +AST2700 using Ibex RISC-V Core as the boot MCU +M: Chia-Wei, Wang +S: Maintained +F: arch/riscv/include/asm/arch-ast2700/ +F: board/aspeed/ibex_ast2700/ +F: configs/ibex-ast2700_defconfig +F: include/configs/ibex_ast2700.h diff --git a/board/aspeed/ibex_ast2700/Makefile b/board/aspeed/ibex_ast2700/Makefile new file mode 100644 index 0000000000..162f46fd46 --- /dev/null +++ b/board/aspeed/ibex_ast2700/Makefile @@ -0,0 +1,2 @@ +obj-y += ibex_ast2700.o +obj-y += sli.o diff --git a/board/aspeed/ibex_ast2700/ibex_ast2700.c b/board/aspeed/ibex_ast2700/ibex_ast2700.c new file mode 100644 index 0000000000..e697f9b8ba --- /dev/null +++ b/board/aspeed/ibex_ast2700/ibex_ast2700.c @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) Aspeed Technology Inc. + */ +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + int ret; + struct udevice *dev; + struct ram_info ram; + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + printf("cannot get DRAM driver\n"); + return ret; + } + + ret = ram_get_info(dev, &ram); + if (ret) { + printf("cannot get DRAM information\n"); + return ret; + } + + gd->ram_size = ram.size; + + return 0; +} + +int spl_board_init_f(void) +{ + sli_init(); + + dram_init(); + + return 0; +} + +struct legacy_img_hdr *spl_get_load_buffer(ssize_t offset, size_t size) +{ + return (struct legacy_img_hdr *)CONFIG_SYS_LOAD_ADDR; +} + +void *board_spl_fit_buffer_addr(ulong fit_size, int sectors, int bl_len) +{ + return (void *)spl_get_load_buffer(sectors, bl_len); +} + +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_RAM; +} + +int board_init(void) +{ + struct udevice *dev; + int i = 0; + int ret; + + /* + * Loop over all MISC uclass drivers to call the comphy code + * and init all CP110 devices enabled in the DT + */ + while (1) { + /* Call the comphy code via the MISC uclass driver */ + ret = uclass_get_device(UCLASS_MISC, i++, &dev); + + /* We're done, once no further CP110 device is found */ + if (ret) + break; + } + + return 0; +} + +int board_late_init(void) +{ + return 0; +} diff --git a/board/aspeed/ibex_ast2700/sli.c b/board/aspeed/ibex_ast2700/sli.c new file mode 100644 index 0000000000..7868111d84 --- /dev/null +++ b/board/aspeed/ibex_ast2700/sli.c @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) Aspeed Technology Inc. + */ +#include +#include +#include +#include +#include + +#define SLI_POLL_TIMEOUT_US 100 + +static void sli_clear_interrupt_status(uint32_t base) +{ + writel(-1, (void *)base + SLI_INTR_STATUS); +} + +static int sli_wait(uint32_t base, uint32_t mask) +{ + uint32_t value; + + sli_clear_interrupt_status(base); + + do { + value = readl((void *)base + SLI_INTR_STATUS); + if (value & SLI_INTR_RX_ERRORS) + return -1; + } while ((value & mask) != mask); + + return 0; +} + +static int sli_wait_suspend(uint32_t base) +{ + return sli_wait(base, SLI_INTR_TX_SUSPEND | SLI_INTR_RX_SUSPEND); +} + +/* + * CPU die --- downstream pads ---> I/O die + * CPU die <--- upstream pads ----- I/O die + * + * US/DS PAD[3:0] : SLIM[3:0] + * US/DS PAD[5:4] : SLIH[1:0] + * US/DS PAD[7:6] : SLIV[1:0] + */ +int sli_init(void) +{ + uint32_t value; + + /* The following training sequence is designed for AST2700A0 */ + value = FIELD_GET(SCU1_REVISION_HWID, readl(SCU1_REVISION)); + if (value) + return 0; + + /* Return if SLI had been calibrated */ + value = readl((void *)SLIH_IOD_BASE + SLI_CTRL_III); + value = FIELD_GET(SLI_CLK_SEL, value); + if (value) { + debug("SLI has been initialized\n"); + return 0; + } + + /* 25MHz PAD delay for AST2700A0 */ + value = SLI_RX_PHY_LAH_SEL_NEG | SLI_TRANS_EN | SLI_CLEAR_BUS; + writel(value, (void *)SLIH_IOD_BASE + SLI_CTRL_I); + writel(value, (void *)SLIM_IOD_BASE + SLI_CTRL_I); + writel(value | SLIV_RAW_MODE, (void *)SLIV_IOD_BASE + SLI_CTRL_I); + sli_wait_suspend(SLIH_IOD_BASE); + sli_wait_suspend(SLIH_CPU_BASE); + + return 0; +} diff --git a/configs/ibex-ast2700_defconfig b/configs/ibex-ast2700_defconfig new file mode 100644 index 0000000000..22629b9048 --- /dev/null +++ b/configs/ibex-ast2700_defconfig @@ -0,0 +1,92 @@ +CONFIG_RISCV=y +CONFIG_SYS_DCACHE_OFF=y +# CONFIG_SPL_USE_ARCH_MEMCPY is not set +# CONFIG_SPL_USE_ARCH_MEMMOVE is not set +# CONFIG_SPL_USE_ARCH_MEMSET is not set +CONFIG_TEXT_BASE=0x80000000 +CONFIG_SYS_MALLOC_LEN=0xf00 +CONFIG_SYS_MALLOC_F_LEN=0xf00 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x14bd7800 +CONFIG_ENV_SIZE=0x20000 +CONFIG_DEFAULT_DEVICE_TREE="ast2700-ibex" +CONFIG_SPL_TEXT_BASE=0x14bc0080 +CONFIG_DM_RESET=y +CONFIG_SPL_BSS_START_ADDR=0x14bd7800 +CONFIG_SPL_BSS_MAX_SIZE=0x800 +CONFIG_SPL_SIZE_LIMIT=0x16000 +CONFIG_SPL=y +CONFIG_SYS_MEM_TOP_HIDE=0x10000000 +CONFIG_SYS_LOAD_ADDR=0x83000000 +CONFIG_BUILD_TARGET="" +CONFIG_TARGET_ASPEED_AST2700_IBEX=y +# CONFIG_RISCV_ISA_F is not set +# CONFIG_RISCV_ISA_A is not set +# CONFIG_SPL_SMP is not set +CONFIG_XIP=y +CONFIG_SPL_XIP=y +# CONFIG_AVAILABLE_HARTS is not set +CONFIG_STACK_SIZE_SHIFT=11 +CONFIG_ENV_VARS_UBOOT_CONFIG=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_STACK_SIZE=0x100000 +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x200c0000 +# CONFIG_BOOTSTD is not set +CONFIG_SYS_BOOTM_LEN=0x4000000 +# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 +# CONFIG_CONSOLE_FLUSH_SUPPORT is not set +# CONFIG_CONSOLE_MUX is not set +CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x16000 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_BOOTI is not set +# CONFIG_BOOTM_LINUX is not set +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_FDT is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_SYSBOOT=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_DEVICE_TREE_INCLUDES="ast2700-u-boot.dtsi" +# CONFIG_OF_TAG_MIGRATE is not set +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +# CONFIG_NET is not set +CONFIG_SYS_RX_ETH_BUFFER=2 +# CONFIG_DM_DEVICE_REMOVE is not set +# CONFIG_DM_SEQ_ALIAS is not set +# CONFIG_BLOCK_CACHE is not set +# CONFIG_CPU is not set +# CONFIG_GPIO is not set +# CONFIG_I2C is not set +CONFIG_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_SDHCI=y +# CONFIG_MTD is not set +# CONFIG_POWER is not set +CONFIG_RAM=y +CONFIG_SPL_RAM=y +# CONFIG_RAM_SIFIVE is not set +CONFIG_SYS_NS16550=y +CONFIG_SYS_NS16550_MEM32=y +CONFIG_VIDEO=y +# CONFIG_VIDEO_LOGO is not set +# CONFIG_RSA is not set +# CONFIG_EFI_LOADER is not set diff --git a/doc/board/aspeed/ibex-ast2700.rst b/doc/board/aspeed/ibex-ast2700.rst new file mode 100644 index 0000000000..511bd081ba --- /dev/null +++ b/doc/board/aspeed/ibex-ast2700.rst @@ -0,0 +1,26 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +IBex AST2700 +============ + +AST2700 integrates an IBex RISC-V 32-bits CPU as the boot MCU to execute the +first stage bootlaoder, namely SPL. + +Build +----- + +1. Prepare the toolchains and make sure the $PATH to toolchains is correct. +2. Use `make ibex-ast2700_defconfig` in u-boot root to build the image + +Running U-Boot SPL +------------------ + +The U-Boot SPL will boot in M mode and load the FIT image which includes +the 2nd stage bootloaders executed by the main processor Cortex-A35. + + +Burn U-Boot to SPI Flash +------------------------ + +Use SPI flash programmer (e.g. SF100) to program the u-book-spl.bin with the +offset 0x80 bytes to the SPI flash beginning. diff --git a/doc/board/aspeed/index.rst b/doc/board/aspeed/index.rst new file mode 100644 index 0000000000..d784c88494 --- /dev/null +++ b/doc/board/aspeed/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Aspeed +====== + +.. toctree:: + :maxdepth: 2 + + ibex-ast2700 diff --git a/doc/board/index.rst b/doc/board/index.rst index 417c128c7a..3fb7c84f10 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -14,6 +14,7 @@ Board-specific doc anbernic/index apple/index armltd/index + aspeed/index asus/index atmel/index beacon/index diff --git a/include/configs/ibex_ast2700.h b/include/configs/ibex_ast2700.h new file mode 100644 index 0000000000..0f6850f724 --- /dev/null +++ b/include/configs/ibex_ast2700.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) Aspeed Technology Inc. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE +#define CFG_SYS_SDRAM_BASE 0x80000000 + +#endif /* __CONFIG_H */