From: Bryan Brattlof <bb@ti.com>
Date: Fri, 29 Dec 2023 17:47:16 +0000 (-0600)
Subject: arm: dts: k3-am654: remove usb0
X-Git-Url: http://git.dujemihanovic.xyz/img/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=9a6fab6d820c3923888402c4516ed271ee040564;p=u-boot.git

arm: dts: k3-am654: remove usb0

The pinmux for usb0 is missing from the Linux board dtb file. Remove it
until we can introduce it in Linux

Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
---

diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index a24cb895e5..3647088c29 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -125,10 +125,6 @@
 	bootph-pre-ram;
 };
 
-&usb0_pins_default {
-	bootph-pre-ram;
-};
-
 &main_pmx1 {
 	bootph-pre-ram;
 };
@@ -161,14 +157,6 @@
 	bootph-pre-ram;
 };
 
-&usb0_phy {
-	bootph-pre-ram;
-};
-
-&usb0 {
-	bootph-pre-ram;
-};
-
 &scm_conf {
 	bootph-pre-ram;
 };
diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts
index da41971a78..8e57c77cba 100644
--- a/arch/arm/dts/k3-am654-r5-base-board.dts
+++ b/arch/arm/dts/k3-am654-r5-base-board.dts
@@ -18,8 +18,6 @@
 		ethernet0 = &cpsw_port1;
 		remoteproc0 = &sysctrler;
 		remoteproc1 = &a53_0;
-		usb0 = &usb0;
-		usb1 = &usb1;
 	};
 
 	a53_0: a53@0 {
@@ -114,14 +112,6 @@
 	};
 };
 
-&main_pmx0 {
-	usb0_pins_default: usb0_pins_default {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */
-		>;
-	};
-};
-
 &memorycontroller {
 	vtt-supply = <&vtt_supply>;
 	pinctrl-names = "default";
@@ -161,14 +151,6 @@
 	      <0x0 0x50000000 0x0 0x8000000>;
 };
 
-&main_pmx0 {
-	usb0_pins_default: usb0_pins_default {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */
-		>;
-	};
-};
-
 &dwc3_0 {
 	status = "okay";
 	/delete-property/ clocks;
@@ -177,17 +159,6 @@
 	/delete-property/ assigned-clock-parents;
 };
 
-&usb0_phy {
-	status = "okay";
-	/delete-property/ clocks;
-};
-
-&usb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_pins_default>;
-	dr_mode = "peripheral";
-};
-
 &davinci_mdio {
 	phy0: ethernet-phy@0 {
 		reg = <0>;