From: Caleb Connolly Date: Mon, 15 Jul 2024 10:08:02 +0000 (+0200) Subject: soc: qcom: import rpmh and cmd-db drivers from Linux X-Git-Url: http://git.dujemihanovic.xyz/img/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=6716e2211f09551b7bf5ddae0634e388e906b219;p=u-boot.git soc: qcom: import rpmh and cmd-db drivers from Linux Import RPMh and cmd-db framework from Linux 6.10-rc6. Acked-by: Sumit Garg Signed-off-by: Caleb Connolly --- diff --git a/drivers/soc/qcom/cmd-db.c b/drivers/soc/qcom/cmd-db.c new file mode 100644 index 0000000000..d845726620 --- /dev/null +++ b/drivers/soc/qcom/cmd-db.c @@ -0,0 +1,393 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2016-2018, 2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define NUM_PRIORITY 2 +#define MAX_SLV_ID 8 +#define SLAVE_ID_MASK 0x7 +#define SLAVE_ID_SHIFT 16 +#define SLAVE_ID(addr) FIELD_GET(GENMASK(19, 16), addr) +#define VRM_ADDR(addr) FIELD_GET(GENMASK(19, 4), addr) + +/** + * struct entry_header: header for each entry in cmddb + * + * @id: resource's identifier + * @priority: unused + * @addr: the address of the resource + * @len: length of the data + * @offset: offset from :@data_offset, start of the data + */ +struct entry_header { + u8 id[8]; + __le32 priority[NUM_PRIORITY]; + __le32 addr; + __le16 len; + __le16 offset; +}; + +/** + * struct rsc_hdr: resource header information + * + * @slv_id: id for the resource + * @header_offset: entry's header at offset from the end of the cmd_db_header + * @data_offset: entry's data at offset from the end of the cmd_db_header + * @cnt: number of entries for HW type + * @version: MSB is major, LSB is minor + * @reserved: reserved for future use. + */ +struct rsc_hdr { + __le16 slv_id; + __le16 header_offset; + __le16 data_offset; + __le16 cnt; + __le16 version; + __le16 reserved[3]; +}; + +/** + * struct cmd_db_header: The DB header information + * + * @version: The cmd db version + * @magic: constant expected in the database + * @header: array of resources + * @checksum: checksum for the header. Unused. + * @reserved: reserved memory + * @data: driver specific data + */ +struct cmd_db_header { + __le32 version; + u8 magic[4]; + struct rsc_hdr header[MAX_SLV_ID]; + __le32 checksum; + __le32 reserved; + u8 data[]; +}; + +/** + * DOC: Description of the Command DB database. + * + * At the start of the command DB memory is the cmd_db_header structure. + * The cmd_db_header holds the version, checksum, magic key as well as an + * array for header for each slave (depicted by the rsc_header). Each h/w + * based accelerator is a 'slave' (shared resource) and has slave id indicating + * the type of accelerator. The rsc_header is the header for such individual + * slaves of a given type. The entries for each of these slaves begin at the + * rsc_hdr.header_offset. In addition each slave could have auxiliary data + * that may be needed by the driver. The data for the slave starts at the + * entry_header.offset to the location pointed to by the rsc_hdr.data_offset. + * + * Drivers have a stringified key to a slave/resource. They can query the slave + * information and get the slave id and the auxiliary data and the length of the + * data. Using this information, they can format the request to be sent to the + * h/w accelerator and request a resource state. + */ + +static const u8 CMD_DB_MAGIC[] = { 0xdb, 0x30, 0x03, 0x0c }; + +static bool cmd_db_magic_matches(const struct cmd_db_header *header) +{ + const u8 *magic = header->magic; + + return memcmp(magic, CMD_DB_MAGIC, ARRAY_SIZE(CMD_DB_MAGIC)) == 0; +} + +static struct cmd_db_header *cmd_db_header; + +static inline const void *rsc_to_entry_header(const struct rsc_hdr *hdr) +{ + u16 offset = le16_to_cpu(hdr->header_offset); + + return cmd_db_header->data + offset; +} + +static inline void * +rsc_offset(const struct rsc_hdr *hdr, const struct entry_header *ent) +{ + u16 offset = le16_to_cpu(hdr->data_offset); + u16 loffset = le16_to_cpu(ent->offset); + + return cmd_db_header->data + offset + loffset; +} + +/** + * cmd_db_ready - Indicates if command DB is available + * + * Return: 0 on success, errno otherwise + */ +int cmd_db_ready(void) +{ + if (cmd_db_header == NULL) + return -EPROBE_DEFER; + else if (!cmd_db_magic_matches(cmd_db_header)) + return -EINVAL; + + return 0; +} +EXPORT_SYMBOL_GPL(cmd_db_ready); + +static int cmd_db_get_header(const char *id, const struct entry_header **eh, + const struct rsc_hdr **rh) +{ + const struct rsc_hdr *rsc_hdr; + const struct entry_header *ent; + int ret, i, j; + u8 query[sizeof(ent->id)] __nonstring; + + ret = cmd_db_ready(); + if (ret) + return ret; + + strtomem_pad(query, id, 0); + + for (i = 0; i < MAX_SLV_ID; i++) { + rsc_hdr = &cmd_db_header->header[i]; + if (!rsc_hdr->slv_id) + break; + + ent = rsc_to_entry_header(rsc_hdr); + for (j = 0; j < le16_to_cpu(rsc_hdr->cnt); j++, ent++) { + if (memcmp(ent->id, query, sizeof(ent->id)) == 0) { + if (eh) + *eh = ent; + if (rh) + *rh = rsc_hdr; + return 0; + } + } + } + + return -ENODEV; +} + +/** + * cmd_db_read_addr() - Query command db for resource id address. + * + * @id: resource id to query for address + * + * Return: resource address on success, 0 on error + * + * This is used to retrieve resource address based on resource + * id. + */ +u32 cmd_db_read_addr(const char *id) +{ + int ret; + const struct entry_header *ent; + + ret = cmd_db_get_header(id, &ent, NULL); + + return ret < 0 ? 0 : le32_to_cpu(ent->addr); +} +EXPORT_SYMBOL_GPL(cmd_db_read_addr); + +/** + * cmd_db_read_aux_data() - Query command db for aux data. + * + * @id: Resource to retrieve AUX Data on + * @len: size of data buffer returned + * + * Return: pointer to data on success, error pointer otherwise + */ +const void *cmd_db_read_aux_data(const char *id, size_t *len) +{ + int ret; + const struct entry_header *ent; + const struct rsc_hdr *rsc_hdr; + + ret = cmd_db_get_header(id, &ent, &rsc_hdr); + if (ret) + return ERR_PTR(ret); + + if (len) + *len = le16_to_cpu(ent->len); + + return rsc_offset(rsc_hdr, ent); +} +EXPORT_SYMBOL_GPL(cmd_db_read_aux_data); + +/** + * cmd_db_match_resource_addr() - Compare if both Resource addresses are same + * + * @addr1: Resource address to compare + * @addr2: Resource address to compare + * + * Return: true if two addresses refer to the same resource, false otherwise + */ +bool cmd_db_match_resource_addr(u32 addr1, u32 addr2) +{ + /* + * Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte + * aligned addresses associated with it. Ignore the offset to check + * for VRM requests. + */ + if (addr1 == addr2) + return true; + else if (SLAVE_ID(addr1) == CMD_DB_HW_VRM && VRM_ADDR(addr1) == VRM_ADDR(addr2)) + return true; + + return false; +} +EXPORT_SYMBOL_GPL(cmd_db_match_resource_addr); + +/** + * cmd_db_read_slave_id - Get the slave ID for a given resource address + * + * @id: Resource id to query the DB for version + * + * Return: cmd_db_hw_type enum on success, CMD_DB_HW_INVALID on error + */ +enum cmd_db_hw_type cmd_db_read_slave_id(const char *id) +{ + int ret; + const struct entry_header *ent; + u32 addr; + + ret = cmd_db_get_header(id, &ent, NULL); + if (ret < 0) + return CMD_DB_HW_INVALID; + + addr = le32_to_cpu(ent->addr); + return (addr >> SLAVE_ID_SHIFT) & SLAVE_ID_MASK; +} +EXPORT_SYMBOL_GPL(cmd_db_read_slave_id); + +#ifdef CONFIG_DEBUG_FS +static int cmd_db_debugfs_dump(struct seq_file *seq, void *p) +{ + int i, j; + const struct rsc_hdr *rsc; + const struct entry_header *ent; + const char *name; + u16 len, version; + u8 major, minor; + + seq_puts(seq, "Command DB DUMP\n"); + + for (i = 0; i < MAX_SLV_ID; i++) { + rsc = &cmd_db_header->header[i]; + if (!rsc->slv_id) + break; + + switch (le16_to_cpu(rsc->slv_id)) { + case CMD_DB_HW_ARC: + name = "ARC"; + break; + case CMD_DB_HW_VRM: + name = "VRM"; + break; + case CMD_DB_HW_BCM: + name = "BCM"; + break; + default: + name = "Unknown"; + break; + } + + version = le16_to_cpu(rsc->version); + major = version >> 8; + minor = version; + + seq_printf(seq, "Slave %s (v%u.%u)\n", name, major, minor); + seq_puts(seq, "-------------------------\n"); + + ent = rsc_to_entry_header(rsc); + for (j = 0; j < le16_to_cpu(rsc->cnt); j++, ent++) { + seq_printf(seq, "0x%05x: %*pEp", le32_to_cpu(ent->addr), + (int)strnlen(ent->id, sizeof(ent->id)), ent->id); + + len = le16_to_cpu(ent->len); + if (len) { + seq_printf(seq, " [%*ph]", + len, rsc_offset(rsc, ent)); + } + seq_putc(seq, '\n'); + } + } + + return 0; +} + +static int open_cmd_db_debugfs(struct inode *inode, struct file *file) +{ + return single_open(file, cmd_db_debugfs_dump, inode->i_private); +} +#endif + +static const struct file_operations cmd_db_debugfs_ops = { +#ifdef CONFIG_DEBUG_FS + .open = open_cmd_db_debugfs, +#endif + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int cmd_db_dev_probe(struct platform_device *pdev) +{ + struct reserved_mem *rmem; + int ret = 0; + + rmem = of_reserved_mem_lookup(pdev->dev.of_node); + if (!rmem) { + dev_err(&pdev->dev, "failed to acquire memory region\n"); + return -EINVAL; + } + + cmd_db_header = memremap(rmem->base, rmem->size, MEMREMAP_WB); + if (!cmd_db_header) { + ret = -ENOMEM; + cmd_db_header = NULL; + return ret; + } + + if (!cmd_db_magic_matches(cmd_db_header)) { + dev_err(&pdev->dev, "Invalid Command DB Magic\n"); + return -EINVAL; + } + + debugfs_create_file("cmd-db", 0400, NULL, NULL, &cmd_db_debugfs_ops); + + device_set_pm_not_required(&pdev->dev); + + return 0; +} + +static const struct of_device_id cmd_db_match_table[] = { + { .compatible = "qcom,cmd-db" }, + { } +}; +MODULE_DEVICE_TABLE(of, cmd_db_match_table); + +static struct platform_driver cmd_db_dev_driver = { + .probe = cmd_db_dev_probe, + .driver = { + .name = "cmd-db", + .of_match_table = cmd_db_match_table, + .suppress_bind_attrs = true, + }, +}; + +static int __init cmd_db_device_init(void) +{ + return platform_driver_register(&cmd_db_dev_driver); +} +core_initcall(cmd_db_device_init); + +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Command DB Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h new file mode 100644 index 0000000000..e3cf1beff8 --- /dev/null +++ b/drivers/soc/qcom/rpmh-internal.h @@ -0,0 +1,148 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. + */ + + +#ifndef __RPM_INTERNAL_H__ +#define __RPM_INTERNAL_H__ + +#include +#include +#include + +#define TCS_TYPE_NR 4 +#define MAX_CMDS_PER_TCS 16 +#define MAX_TCS_PER_TYPE 3 +#define MAX_TCS_NR (MAX_TCS_PER_TYPE * TCS_TYPE_NR) +#define MAX_TCS_SLOTS (MAX_CMDS_PER_TCS * MAX_TCS_PER_TYPE) + +struct rsc_drv; + +/** + * struct tcs_group: group of Trigger Command Sets (TCS) to send state requests + * to the controller + * + * @drv: The controller. + * @type: Type of the TCS in this group - active, sleep, wake. + * @mask: Mask of the TCSes relative to all the TCSes in the RSC. + * @offset: Start of the TCS group relative to the TCSes in the RSC. + * @num_tcs: Number of TCSes in this type. + * @ncpt: Number of commands in each TCS. + * @req: Requests that are sent from the TCS; only used for ACTIVE_ONLY + * transfers (could be on a wake/sleep TCS if we are borrowing for + * an ACTIVE_ONLY transfer). + * Start: grab drv->lock, set req, set tcs_in_use, drop drv->lock, + * trigger + * End: get irq, access req, + * grab drv->lock, clear tcs_in_use, drop drv->lock + * @slots: Indicates which of @cmd_addr are occupied; only used for + * SLEEP / WAKE TCSs. Things are tightly packed in the + * case that (ncpt < MAX_CMDS_PER_TCS). That is if ncpt = 2 and + * MAX_CMDS_PER_TCS = 16 then bit[2] = the first bit in 2nd TCS. + */ +struct tcs_group { + struct rsc_drv *drv; + int type; + u32 mask; + u32 offset; + int num_tcs; + int ncpt; + const struct tcs_request *req[MAX_TCS_PER_TYPE]; + DECLARE_BITMAP(slots, MAX_TCS_SLOTS); +}; + +/** + * struct rpmh_request: the message to be sent to rpmh-rsc + * + * @msg: the request + * @cmd: the payload that will be part of the @msg + * @completion: triggered when request is done + * @dev: the device making the request + * @needs_free: check to free dynamically allocated request object + */ +struct rpmh_request { + struct tcs_request msg; + struct tcs_cmd cmd[MAX_RPMH_PAYLOAD]; + struct completion *completion; + const struct device *dev; + bool needs_free; +}; + +/** + * struct rpmh_ctrlr: our representation of the controller + * + * @cache: the list of cached requests + * @cache_lock: synchronize access to the cache data + * @dirty: was the cache updated since flush + * @batch_cache: Cache sleep and wake requests sent as batch + */ +struct rpmh_ctrlr { + struct list_head cache; + spinlock_t cache_lock; + bool dirty; + struct list_head batch_cache; +}; + +struct rsc_ver { + u32 major; + u32 minor; +}; + +/** + * struct rsc_drv: the Direct Resource Voter (DRV) of the + * Resource State Coordinator controller (RSC) + * + * @name: Controller identifier. + * @base: Start address of the DRV registers in this controller. + * @tcs_base: Start address of the TCS registers in this controller. + * @id: Instance id in the controller (Direct Resource Voter). + * @num_tcs: Number of TCSes in this DRV. + * @rsc_pm: CPU PM notifier for controller. + * Used when solver mode is not present. + * @cpus_in_pm: Number of CPUs not in idle power collapse. + * Used when solver mode and "power-domains" is not present. + * @genpd_nb: PM Domain notifier for cluster genpd notifications. + * @tcs: TCS groups. + * @tcs_in_use: S/W state of the TCS; only set for ACTIVE_ONLY + * transfers, but might show a sleep/wake TCS in use if + * it was borrowed for an active_only transfer. You + * must hold the lock in this struct (AKA drv->lock) in + * order to update this. + * @lock: Synchronize state of the controller. If RPMH's cache + * lock will also be held, the order is: drv->lock then + * cache_lock. + * @tcs_wait: Wait queue used to wait for @tcs_in_use to free up a + * slot + * @client: Handle to the DRV's client. + * @dev: RSC device. + */ +struct rsc_drv { + const char *name; + void __iomem *base; + void __iomem *tcs_base; + int id; + int num_tcs; + struct notifier_block rsc_pm; + struct notifier_block genpd_nb; + atomic_t cpus_in_pm; + struct tcs_group tcs[TCS_TYPE_NR]; + DECLARE_BITMAP(tcs_in_use, MAX_TCS_NR); + spinlock_t lock; + wait_queue_head_t tcs_wait; + struct rpmh_ctrlr client; + struct device *dev; + struct rsc_ver ver; + u32 *regs; +}; + +int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg); +int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv, + const struct tcs_request *msg); +void rpmh_rsc_invalidate(struct rsc_drv *drv); +void rpmh_rsc_write_next_wakeup(struct rsc_drv *drv); + +void rpmh_tx_done(const struct tcs_request *msg); +int rpmh_flush(struct rpmh_ctrlr *ctrlr); + +#endif /* __RPM_INTERNAL_H__ */ diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c new file mode 100644 index 0000000000..de86009ecd --- /dev/null +++ b/drivers/soc/qcom/rpmh-rsc.c @@ -0,0 +1,1162 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#define pr_fmt(fmt) "%s " fmt, KBUILD_MODNAME + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "rpmh-internal.h" + +#define CREATE_TRACE_POINTS +#include "trace-rpmh.h" + + +#define RSC_DRV_ID 0 + +#define MAJOR_VER_MASK 0xFF +#define MAJOR_VER_SHIFT 16 +#define MINOR_VER_MASK 0xFF +#define MINOR_VER_SHIFT 8 + +enum { + RSC_DRV_TCS_OFFSET, + RSC_DRV_CMD_OFFSET, + DRV_SOLVER_CONFIG, + DRV_PRNT_CHLD_CONFIG, + RSC_DRV_IRQ_ENABLE, + RSC_DRV_IRQ_STATUS, + RSC_DRV_IRQ_CLEAR, + RSC_DRV_CMD_WAIT_FOR_CMPL, + RSC_DRV_CONTROL, + RSC_DRV_STATUS, + RSC_DRV_CMD_ENABLE, + RSC_DRV_CMD_MSGID, + RSC_DRV_CMD_ADDR, + RSC_DRV_CMD_DATA, + RSC_DRV_CMD_STATUS, + RSC_DRV_CMD_RESP_DATA, +}; + +/* DRV HW Solver Configuration Information Register */ +#define DRV_HW_SOLVER_MASK 1 +#define DRV_HW_SOLVER_SHIFT 24 + +/* DRV TCS Configuration Information Register */ +#define DRV_NUM_TCS_MASK 0x3F +#define DRV_NUM_TCS_SHIFT 6 +#define DRV_NCPT_MASK 0x1F +#define DRV_NCPT_SHIFT 27 + +/* Offsets for CONTROL TCS Registers */ +#define RSC_DRV_CTL_TCS_DATA_HI 0x38 +#define RSC_DRV_CTL_TCS_DATA_HI_MASK 0xFFFFFF +#define RSC_DRV_CTL_TCS_DATA_HI_VALID BIT(31) +#define RSC_DRV_CTL_TCS_DATA_LO 0x40 +#define RSC_DRV_CTL_TCS_DATA_LO_MASK 0xFFFFFFFF +#define RSC_DRV_CTL_TCS_DATA_SIZE 32 + +#define TCS_AMC_MODE_ENABLE BIT(16) +#define TCS_AMC_MODE_TRIGGER BIT(24) + +/* TCS CMD register bit mask */ +#define CMD_MSGID_LEN 8 +#define CMD_MSGID_RESP_REQ BIT(8) +#define CMD_MSGID_WRITE BIT(16) +#define CMD_STATUS_ISSUED BIT(8) +#define CMD_STATUS_COMPL BIT(16) + +/* + * Here's a high level overview of how all the registers in RPMH work + * together: + * + * - The main rpmh-rsc address is the base of a register space that can + * be used to find overall configuration of the hardware + * (DRV_PRNT_CHLD_CONFIG). Also found within the rpmh-rsc register + * space are all the TCS blocks. The offset of the TCS blocks is + * specified in the device tree by "qcom,tcs-offset" and used to + * compute tcs_base. + * - TCS blocks come one after another. Type, count, and order are + * specified by the device tree as "qcom,tcs-config". + * - Each TCS block has some registers, then space for up to 16 commands. + * Note that though address space is reserved for 16 commands, fewer + * might be present. See ncpt (num cmds per TCS). + * + * Here's a picture: + * + * +---------------------------------------------------+ + * |RSC | + * | ctrl | + * | | + * | Drvs: | + * | +-----------------------------------------------+ | + * | |DRV0 | | + * | | ctrl/config | | + * | | IRQ | | + * | | | | + * | | TCSes: | | + * | | +------------------------------------------+ | | + * | | |TCS0 | | | | | | | | | | | | | | | + * | | | ctrl | 0| 1| 2| 3| 4| 5| .| .| .| .|14|15| | | + * | | | | | | | | | | | | | | | | | | + * | | +------------------------------------------+ | | + * | | +------------------------------------------+ | | + * | | |TCS1 | | | | | | | | | | | | | | | + * | | | ctrl | 0| 1| 2| 3| 4| 5| .| .| .| .|14|15| | | + * | | | | | | | | | | | | | | | | | | + * | | +------------------------------------------+ | | + * | | +------------------------------------------+ | | + * | | |TCS2 | | | | | | | | | | | | | | | + * | | | ctrl | 0| 1| 2| 3| 4| 5| .| .| .| .|14|15| | | + * | | | | | | | | | | | | | | | | | | + * | | +------------------------------------------+ | | + * | | ...... | | + * | +-----------------------------------------------+ | + * | +-----------------------------------------------+ | + * | |DRV1 | | + * | | (same as DRV0) | | + * | +-----------------------------------------------+ | + * | ...... | + * +---------------------------------------------------+ + */ + +#define USECS_TO_CYCLES(time_usecs) \ + xloops_to_cycles((time_usecs) * 0x10C7UL) + +static inline unsigned long xloops_to_cycles(u64 xloops) +{ + return (xloops * loops_per_jiffy * HZ) >> 32; +} + +static u32 rpmh_rsc_reg_offset_ver_2_7[] = { + [RSC_DRV_TCS_OFFSET] = 672, + [RSC_DRV_CMD_OFFSET] = 20, + [DRV_SOLVER_CONFIG] = 0x04, + [DRV_PRNT_CHLD_CONFIG] = 0x0C, + [RSC_DRV_IRQ_ENABLE] = 0x00, + [RSC_DRV_IRQ_STATUS] = 0x04, + [RSC_DRV_IRQ_CLEAR] = 0x08, + [RSC_DRV_CMD_WAIT_FOR_CMPL] = 0x10, + [RSC_DRV_CONTROL] = 0x14, + [RSC_DRV_STATUS] = 0x18, + [RSC_DRV_CMD_ENABLE] = 0x1C, + [RSC_DRV_CMD_MSGID] = 0x30, + [RSC_DRV_CMD_ADDR] = 0x34, + [RSC_DRV_CMD_DATA] = 0x38, + [RSC_DRV_CMD_STATUS] = 0x3C, + [RSC_DRV_CMD_RESP_DATA] = 0x40, +}; + +static u32 rpmh_rsc_reg_offset_ver_3_0[] = { + [RSC_DRV_TCS_OFFSET] = 672, + [RSC_DRV_CMD_OFFSET] = 24, + [DRV_SOLVER_CONFIG] = 0x04, + [DRV_PRNT_CHLD_CONFIG] = 0x0C, + [RSC_DRV_IRQ_ENABLE] = 0x00, + [RSC_DRV_IRQ_STATUS] = 0x04, + [RSC_DRV_IRQ_CLEAR] = 0x08, + [RSC_DRV_CMD_WAIT_FOR_CMPL] = 0x20, + [RSC_DRV_CONTROL] = 0x24, + [RSC_DRV_STATUS] = 0x28, + [RSC_DRV_CMD_ENABLE] = 0x2C, + [RSC_DRV_CMD_MSGID] = 0x34, + [RSC_DRV_CMD_ADDR] = 0x38, + [RSC_DRV_CMD_DATA] = 0x3C, + [RSC_DRV_CMD_STATUS] = 0x40, + [RSC_DRV_CMD_RESP_DATA] = 0x44, +}; + +static inline void __iomem * +tcs_reg_addr(const struct rsc_drv *drv, int reg, int tcs_id) +{ + return drv->tcs_base + drv->regs[RSC_DRV_TCS_OFFSET] * tcs_id + reg; +} + +static inline void __iomem * +tcs_cmd_addr(const struct rsc_drv *drv, int reg, int tcs_id, int cmd_id) +{ + return tcs_reg_addr(drv, reg, tcs_id) + drv->regs[RSC_DRV_CMD_OFFSET] * cmd_id; +} + +static u32 read_tcs_cmd(const struct rsc_drv *drv, int reg, int tcs_id, + int cmd_id) +{ + return readl_relaxed(tcs_cmd_addr(drv, reg, tcs_id, cmd_id)); +} + +static u32 read_tcs_reg(const struct rsc_drv *drv, int reg, int tcs_id) +{ + return readl_relaxed(tcs_reg_addr(drv, reg, tcs_id)); +} + +static void write_tcs_cmd(const struct rsc_drv *drv, int reg, int tcs_id, + int cmd_id, u32 data) +{ + writel_relaxed(data, tcs_cmd_addr(drv, reg, tcs_id, cmd_id)); +} + +static void write_tcs_reg(const struct rsc_drv *drv, int reg, int tcs_id, + u32 data) +{ + writel_relaxed(data, tcs_reg_addr(drv, reg, tcs_id)); +} + +static void write_tcs_reg_sync(const struct rsc_drv *drv, int reg, int tcs_id, + u32 data) +{ + int i; + + writel(data, tcs_reg_addr(drv, reg, tcs_id)); + + /* + * Wait until we read back the same value. Use a counter rather than + * ktime for timeout since this may be called after timekeeping stops. + */ + for (i = 0; i < USEC_PER_SEC; i++) { + if (readl(tcs_reg_addr(drv, reg, tcs_id)) == data) + return; + udelay(1); + } + pr_err("%s: error writing %#x to %d:%#x\n", drv->name, + data, tcs_id, reg); +} + +/** + * tcs_invalidate() - Invalidate all TCSes of the given type (sleep or wake). + * @drv: The RSC controller. + * @type: SLEEP_TCS or WAKE_TCS + * + * This will clear the "slots" variable of the given tcs_group and also + * tell the hardware to forget about all entries. + * + * The caller must ensure that no other RPMH actions are happening when this + * function is called, since otherwise the device may immediately become + * used again even before this function exits. + */ +static void tcs_invalidate(struct rsc_drv *drv, int type) +{ + int m; + struct tcs_group *tcs = &drv->tcs[type]; + + /* Caller ensures nobody else is running so no lock */ + if (bitmap_empty(tcs->slots, MAX_TCS_SLOTS)) + return; + + for (m = tcs->offset; m < tcs->offset + tcs->num_tcs; m++) + write_tcs_reg_sync(drv, drv->regs[RSC_DRV_CMD_ENABLE], m, 0); + + bitmap_zero(tcs->slots, MAX_TCS_SLOTS); +} + +/** + * rpmh_rsc_invalidate() - Invalidate sleep and wake TCSes. + * @drv: The RSC controller. + * + * The caller must ensure that no other RPMH actions are happening when this + * function is called, since otherwise the device may immediately become + * used again even before this function exits. + */ +void rpmh_rsc_invalidate(struct rsc_drv *drv) +{ + tcs_invalidate(drv, SLEEP_TCS); + tcs_invalidate(drv, WAKE_TCS); +} + +/** + * get_tcs_for_msg() - Get the tcs_group used to send the given message. + * @drv: The RSC controller. + * @msg: The message we want to send. + * + * This is normally pretty straightforward except if we are trying to send + * an ACTIVE_ONLY message but don't have any active_only TCSes. + * + * Return: A pointer to a tcs_group or an ERR_PTR. + */ +static struct tcs_group *get_tcs_for_msg(struct rsc_drv *drv, + const struct tcs_request *msg) +{ + int type; + struct tcs_group *tcs; + + switch (msg->state) { + case RPMH_ACTIVE_ONLY_STATE: + type = ACTIVE_TCS; + break; + case RPMH_WAKE_ONLY_STATE: + type = WAKE_TCS; + break; + case RPMH_SLEEP_STATE: + type = SLEEP_TCS; + break; + default: + return ERR_PTR(-EINVAL); + } + + /* + * If we are making an active request on a RSC that does not have a + * dedicated TCS for active state use, then re-purpose a wake TCS to + * send active votes. This is safe because we ensure any active-only + * transfers have finished before we use it (maybe by running from + * the last CPU in PM code). + */ + tcs = &drv->tcs[type]; + if (msg->state == RPMH_ACTIVE_ONLY_STATE && !tcs->num_tcs) + tcs = &drv->tcs[WAKE_TCS]; + + return tcs; +} + +/** + * get_req_from_tcs() - Get a stashed request that was xfering on the given TCS. + * @drv: The RSC controller. + * @tcs_id: The global ID of this TCS. + * + * For ACTIVE_ONLY transfers we want to call back into the client when the + * transfer finishes. To do this we need the "request" that the client + * originally provided us. This function grabs the request that we stashed + * when we started the transfer. + * + * This only makes sense for ACTIVE_ONLY transfers since those are the only + * ones we track sending (the only ones we enable interrupts for and the only + * ones we call back to the client for). + * + * Return: The stashed request. + */ +static const struct tcs_request *get_req_from_tcs(struct rsc_drv *drv, + int tcs_id) +{ + struct tcs_group *tcs; + int i; + + for (i = 0; i < TCS_TYPE_NR; i++) { + tcs = &drv->tcs[i]; + if (tcs->mask & BIT(tcs_id)) + return tcs->req[tcs_id - tcs->offset]; + } + + return NULL; +} + +/** + * __tcs_set_trigger() - Start xfer on a TCS or unset trigger on a borrowed TCS + * @drv: The controller. + * @tcs_id: The global ID of this TCS. + * @trigger: If true then untrigger/retrigger. If false then just untrigger. + * + * In the normal case we only ever call with "trigger=true" to start a + * transfer. That will un-trigger/disable the TCS from the last transfer + * then trigger/enable for this transfer. + * + * If we borrowed a wake TCS for an active-only transfer we'll also call + * this function with "trigger=false" to just do the un-trigger/disable + * before using the TCS for wake purposes again. + * + * Note that the AP is only in charge of triggering active-only transfers. + * The AP never triggers sleep/wake values using this function. + */ +static void __tcs_set_trigger(struct rsc_drv *drv, int tcs_id, bool trigger) +{ + u32 enable; + u32 reg = drv->regs[RSC_DRV_CONTROL]; + + /* + * HW req: Clear the DRV_CONTROL and enable TCS again + * While clearing ensure that the AMC mode trigger is cleared + * and then the mode enable is cleared. + */ + enable = read_tcs_reg(drv, reg, tcs_id); + enable &= ~TCS_AMC_MODE_TRIGGER; + write_tcs_reg_sync(drv, reg, tcs_id, enable); + enable &= ~TCS_AMC_MODE_ENABLE; + write_tcs_reg_sync(drv, reg, tcs_id, enable); + + if (trigger) { + /* Enable the AMC mode on the TCS and then trigger the TCS */ + enable = TCS_AMC_MODE_ENABLE; + write_tcs_reg_sync(drv, reg, tcs_id, enable); + enable |= TCS_AMC_MODE_TRIGGER; + write_tcs_reg(drv, reg, tcs_id, enable); + } +} + +/** + * enable_tcs_irq() - Enable or disable interrupts on the given TCS. + * @drv: The controller. + * @tcs_id: The global ID of this TCS. + * @enable: If true then enable; if false then disable + * + * We only ever call this when we borrow a wake TCS for an active-only + * transfer. For active-only TCSes interrupts are always left enabled. + */ +static void enable_tcs_irq(struct rsc_drv *drv, int tcs_id, bool enable) +{ + u32 data; + u32 reg = drv->regs[RSC_DRV_IRQ_ENABLE]; + + data = readl_relaxed(drv->tcs_base + reg); + if (enable) + data |= BIT(tcs_id); + else + data &= ~BIT(tcs_id); + writel_relaxed(data, drv->tcs_base + reg); +} + +/** + * tcs_tx_done() - TX Done interrupt handler. + * @irq: The IRQ number (ignored). + * @p: Pointer to "struct rsc_drv". + * + * Called for ACTIVE_ONLY transfers (those are the only ones we enable the + * IRQ for) when a transfer is done. + * + * Return: IRQ_HANDLED + */ +static irqreturn_t tcs_tx_done(int irq, void *p) +{ + struct rsc_drv *drv = p; + int i; + unsigned long irq_status; + const struct tcs_request *req; + + irq_status = readl_relaxed(drv->tcs_base + drv->regs[RSC_DRV_IRQ_STATUS]); + + for_each_set_bit(i, &irq_status, BITS_PER_TYPE(u32)) { + req = get_req_from_tcs(drv, i); + if (WARN_ON(!req)) + goto skip; + + trace_rpmh_tx_done(drv, i, req); + + /* + * If wake tcs was re-purposed for sending active + * votes, clear AMC trigger & enable modes and + * disable interrupt for this TCS + */ + if (!drv->tcs[ACTIVE_TCS].num_tcs) + __tcs_set_trigger(drv, i, false); +skip: + /* Reclaim the TCS */ + write_tcs_reg(drv, drv->regs[RSC_DRV_CMD_ENABLE], i, 0); + writel_relaxed(BIT(i), drv->tcs_base + drv->regs[RSC_DRV_IRQ_CLEAR]); + spin_lock(&drv->lock); + clear_bit(i, drv->tcs_in_use); + /* + * Disable interrupt for WAKE TCS to avoid being + * spammed with interrupts coming when the solver + * sends its wake votes. + */ + if (!drv->tcs[ACTIVE_TCS].num_tcs) + enable_tcs_irq(drv, i, false); + spin_unlock(&drv->lock); + wake_up(&drv->tcs_wait); + if (req) + rpmh_tx_done(req); + } + + return IRQ_HANDLED; +} + +/** + * __tcs_buffer_write() - Write to TCS hardware from a request; don't trigger. + * @drv: The controller. + * @tcs_id: The global ID of this TCS. + * @cmd_id: The index within the TCS to start writing. + * @msg: The message we want to send, which will contain several addr/data + * pairs to program (but few enough that they all fit in one TCS). + * + * This is used for all types of transfers (active, sleep, and wake). + */ +static void __tcs_buffer_write(struct rsc_drv *drv, int tcs_id, int cmd_id, + const struct tcs_request *msg) +{ + u32 msgid; + u32 cmd_msgid = CMD_MSGID_LEN | CMD_MSGID_WRITE; + u32 cmd_enable = 0; + struct tcs_cmd *cmd; + int i, j; + + /* Convert all commands to RR when the request has wait_for_compl set */ + cmd_msgid |= msg->wait_for_compl ? CMD_MSGID_RESP_REQ : 0; + + for (i = 0, j = cmd_id; i < msg->num_cmds; i++, j++) { + cmd = &msg->cmds[i]; + cmd_enable |= BIT(j); + msgid = cmd_msgid; + /* + * Additionally, if the cmd->wait is set, make the command + * response reqd even if the overall request was fire-n-forget. + */ + msgid |= cmd->wait ? CMD_MSGID_RESP_REQ : 0; + + write_tcs_cmd(drv, drv->regs[RSC_DRV_CMD_MSGID], tcs_id, j, msgid); + write_tcs_cmd(drv, drv->regs[RSC_DRV_CMD_ADDR], tcs_id, j, cmd->addr); + write_tcs_cmd(drv, drv->regs[RSC_DRV_CMD_DATA], tcs_id, j, cmd->data); + trace_rpmh_send_msg(drv, tcs_id, msg->state, j, msgid, cmd); + } + + cmd_enable |= read_tcs_reg(drv, drv->regs[RSC_DRV_CMD_ENABLE], tcs_id); + write_tcs_reg(drv, drv->regs[RSC_DRV_CMD_ENABLE], tcs_id, cmd_enable); +} + +/** + * check_for_req_inflight() - Look to see if conflicting cmds are in flight. + * @drv: The controller. + * @tcs: A pointer to the tcs_group used for ACTIVE_ONLY transfers. + * @msg: The message we want to send, which will contain several addr/data + * pairs to program (but few enough that they all fit in one TCS). + * + * This will walk through the TCSes in the group and check if any of them + * appear to be sending to addresses referenced in the message. If it finds + * one it'll return -EBUSY. + * + * Only for use for active-only transfers. + * + * Must be called with the drv->lock held since that protects tcs_in_use. + * + * Return: 0 if nothing in flight or -EBUSY if we should try again later. + * The caller must re-enable interrupts between tries since that's + * the only way tcs_in_use will ever be updated and the only way + * RSC_DRV_CMD_ENABLE will ever be cleared. + */ +static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs, + const struct tcs_request *msg) +{ + unsigned long curr_enabled; + u32 addr; + int j, k; + int i = tcs->offset; + + for_each_set_bit_from(i, drv->tcs_in_use, tcs->offset + tcs->num_tcs) { + curr_enabled = read_tcs_reg(drv, drv->regs[RSC_DRV_CMD_ENABLE], i); + + for_each_set_bit(j, &curr_enabled, MAX_CMDS_PER_TCS) { + addr = read_tcs_cmd(drv, drv->regs[RSC_DRV_CMD_ADDR], i, j); + for (k = 0; k < msg->num_cmds; k++) { + if (cmd_db_match_resource_addr(msg->cmds[k].addr, addr)) + return -EBUSY; + } + } + } + + return 0; +} + +/** + * find_free_tcs() - Find free tcs in the given tcs_group; only for active. + * @tcs: A pointer to the active-only tcs_group (or the wake tcs_group if + * we borrowed it because there are zero active-only ones). + * + * Must be called with the drv->lock held since that protects tcs_in_use. + * + * Return: The first tcs that's free or -EBUSY if all in use. + */ +static int find_free_tcs(struct tcs_group *tcs) +{ + const struct rsc_drv *drv = tcs->drv; + unsigned long i; + unsigned long max = tcs->offset + tcs->num_tcs; + + i = find_next_zero_bit(drv->tcs_in_use, max, tcs->offset); + if (i >= max) + return -EBUSY; + + return i; +} + +/** + * claim_tcs_for_req() - Claim a tcs in the given tcs_group; only for active. + * @drv: The controller. + * @tcs: The tcs_group used for ACTIVE_ONLY transfers. + * @msg: The data to be sent. + * + * Claims a tcs in the given tcs_group while making sure that no existing cmd + * is in flight that would conflict with the one in @msg. + * + * Context: Must be called with the drv->lock held since that protects + * tcs_in_use. + * + * Return: The id of the claimed tcs or -EBUSY if a matching msg is in flight + * or the tcs_group is full. + */ +static int claim_tcs_for_req(struct rsc_drv *drv, struct tcs_group *tcs, + const struct tcs_request *msg) +{ + int ret; + + /* + * The h/w does not like if we send a request to the same address, + * when one is already in-flight or being processed. + */ + ret = check_for_req_inflight(drv, tcs, msg); + if (ret) + return ret; + + return find_free_tcs(tcs); +} + +/** + * rpmh_rsc_send_data() - Write / trigger active-only message. + * @drv: The controller. + * @msg: The data to be sent. + * + * NOTES: + * - This is only used for "ACTIVE_ONLY" since the limitations of this + * function don't make sense for sleep/wake cases. + * - To do the transfer, we will grab a whole TCS for ourselves--we don't + * try to share. If there are none available we'll wait indefinitely + * for a free one. + * - This function will not wait for the commands to be finished, only for + * data to be programmed into the RPMh. See rpmh_tx_done() which will + * be called when the transfer is fully complete. + * - This function must be called with interrupts enabled. If the hardware + * is busy doing someone else's transfer we need that transfer to fully + * finish so that we can have the hardware, and to fully finish it needs + * the interrupt handler to run. If the interrupts is set to run on the + * active CPU this can never happen if interrupts are disabled. + * + * Return: 0 on success, -EINVAL on error. + */ +int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg) +{ + struct tcs_group *tcs; + int tcs_id; + + might_sleep(); + + tcs = get_tcs_for_msg(drv, msg); + if (IS_ERR(tcs)) + return PTR_ERR(tcs); + + spin_lock_irq(&drv->lock); + + /* Wait forever for a free tcs. It better be there eventually! */ + wait_event_lock_irq(drv->tcs_wait, + (tcs_id = claim_tcs_for_req(drv, tcs, msg)) >= 0, + drv->lock); + + tcs->req[tcs_id - tcs->offset] = msg; + set_bit(tcs_id, drv->tcs_in_use); + if (msg->state == RPMH_ACTIVE_ONLY_STATE && tcs->type != ACTIVE_TCS) { + /* + * Clear previously programmed WAKE commands in selected + * repurposed TCS to avoid triggering them. tcs->slots will be + * cleaned from rpmh_flush() by invoking rpmh_rsc_invalidate() + */ + write_tcs_reg_sync(drv, drv->regs[RSC_DRV_CMD_ENABLE], tcs_id, 0); + enable_tcs_irq(drv, tcs_id, true); + } + spin_unlock_irq(&drv->lock); + + /* + * These two can be done after the lock is released because: + * - We marked "tcs_in_use" under lock. + * - Once "tcs_in_use" has been marked nobody else could be writing + * to these registers until the interrupt goes off. + * - The interrupt can't go off until we trigger w/ the last line + * of __tcs_set_trigger() below. + */ + __tcs_buffer_write(drv, tcs_id, 0, msg); + __tcs_set_trigger(drv, tcs_id, true); + + return 0; +} + +/** + * find_slots() - Find a place to write the given message. + * @tcs: The tcs group to search. + * @msg: The message we want to find room for. + * @tcs_id: If we return 0 from the function, we return the global ID of the + * TCS to write to here. + * @cmd_id: If we return 0 from the function, we return the index of + * the command array of the returned TCS where the client should + * start writing the message. + * + * Only for use on sleep/wake TCSes since those are the only ones we maintain + * tcs->slots for. + * + * Return: -ENOMEM if there was no room, else 0. + */ +static int find_slots(struct tcs_group *tcs, const struct tcs_request *msg, + int *tcs_id, int *cmd_id) +{ + int slot, offset; + int i = 0; + + /* Do over, until we can fit the full payload in a single TCS */ + do { + slot = bitmap_find_next_zero_area(tcs->slots, MAX_TCS_SLOTS, + i, msg->num_cmds, 0); + if (slot >= tcs->num_tcs * tcs->ncpt) + return -ENOMEM; + i += tcs->ncpt; + } while (slot + msg->num_cmds - 1 >= i); + + bitmap_set(tcs->slots, slot, msg->num_cmds); + + offset = slot / tcs->ncpt; + *tcs_id = offset + tcs->offset; + *cmd_id = slot % tcs->ncpt; + + return 0; +} + +/** + * rpmh_rsc_write_ctrl_data() - Write request to controller but don't trigger. + * @drv: The controller. + * @msg: The data to be written to the controller. + * + * This should only be called for sleep/wake state, never active-only + * state. + * + * The caller must ensure that no other RPMH actions are happening and the + * controller is idle when this function is called since it runs lockless. + * + * Return: 0 if no error; else -error. + */ +int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv, const struct tcs_request *msg) +{ + struct tcs_group *tcs; + int tcs_id = 0, cmd_id = 0; + int ret; + + tcs = get_tcs_for_msg(drv, msg); + if (IS_ERR(tcs)) + return PTR_ERR(tcs); + + /* find the TCS id and the command in the TCS to write to */ + ret = find_slots(tcs, msg, &tcs_id, &cmd_id); + if (!ret) + __tcs_buffer_write(drv, tcs_id, cmd_id, msg); + + return ret; +} + +/** + * rpmh_rsc_ctrlr_is_busy() - Check if any of the AMCs are busy. + * @drv: The controller + * + * Checks if any of the AMCs are busy in handling ACTIVE sets. + * This is called from the last cpu powering down before flushing + * SLEEP and WAKE sets. If AMCs are busy, controller can not enter + * power collapse, so deny from the last cpu's pm notification. + * + * Context: Must be called with the drv->lock held. + * + * Return: + * * False - AMCs are idle + * * True - AMCs are busy + */ +static bool rpmh_rsc_ctrlr_is_busy(struct rsc_drv *drv) +{ + unsigned long set; + const struct tcs_group *tcs = &drv->tcs[ACTIVE_TCS]; + unsigned long max; + + /* + * If we made an active request on a RSC that does not have a + * dedicated TCS for active state use, then re-purposed wake TCSes + * should be checked for not busy, because we used wake TCSes for + * active requests in this case. + */ + if (!tcs->num_tcs) + tcs = &drv->tcs[WAKE_TCS]; + + max = tcs->offset + tcs->num_tcs; + set = find_next_bit(drv->tcs_in_use, max, tcs->offset); + + return set < max; +} + +/** + * rpmh_rsc_write_next_wakeup() - Write next wakeup in CONTROL_TCS. + * @drv: The controller + * + * Writes maximum wakeup cycles when called from suspend. + * Writes earliest hrtimer wakeup when called from idle. + */ +void rpmh_rsc_write_next_wakeup(struct rsc_drv *drv) +{ + ktime_t now, wakeup; + u64 wakeup_us, wakeup_cycles = ~0; + u32 lo, hi; + + if (!drv->tcs[CONTROL_TCS].num_tcs || !drv->genpd_nb.notifier_call) + return; + + /* Set highest time when system (timekeeping) is suspended */ + if (system_state == SYSTEM_SUSPEND) + goto exit; + + /* Find the earliest hrtimer wakeup from online cpus */ + wakeup = dev_pm_genpd_get_next_hrtimer(drv->dev); + + /* Find the relative wakeup in kernel time scale */ + now = ktime_get(); + wakeup = ktime_sub(wakeup, now); + wakeup_us = ktime_to_us(wakeup); + + /* Convert the wakeup to arch timer scale */ + wakeup_cycles = USECS_TO_CYCLES(wakeup_us); + wakeup_cycles += arch_timer_read_counter(); + +exit: + lo = wakeup_cycles & RSC_DRV_CTL_TCS_DATA_LO_MASK; + hi = wakeup_cycles >> RSC_DRV_CTL_TCS_DATA_SIZE; + hi &= RSC_DRV_CTL_TCS_DATA_HI_MASK; + hi |= RSC_DRV_CTL_TCS_DATA_HI_VALID; + + writel_relaxed(lo, drv->base + RSC_DRV_CTL_TCS_DATA_LO); + writel_relaxed(hi, drv->base + RSC_DRV_CTL_TCS_DATA_HI); +} + +/** + * rpmh_rsc_cpu_pm_callback() - Check if any of the AMCs are busy. + * @nfb: Pointer to the notifier block in struct rsc_drv. + * @action: CPU_PM_ENTER, CPU_PM_ENTER_FAILED, or CPU_PM_EXIT. + * @v: Unused + * + * This function is given to cpu_pm_register_notifier so we can be informed + * about when CPUs go down. When all CPUs go down we know no more active + * transfers will be started so we write sleep/wake sets. This function gets + * called from cpuidle code paths and also at system suspend time. + * + * If its last CPU going down and AMCs are not busy then writes cached sleep + * and wake messages to TCSes. The firmware then takes care of triggering + * them when entering deepest low power modes. + * + * Return: See cpu_pm_register_notifier() + */ +static int rpmh_rsc_cpu_pm_callback(struct notifier_block *nfb, + unsigned long action, void *v) +{ + struct rsc_drv *drv = container_of(nfb, struct rsc_drv, rsc_pm); + int ret = NOTIFY_OK; + int cpus_in_pm; + + switch (action) { + case CPU_PM_ENTER: + cpus_in_pm = atomic_inc_return(&drv->cpus_in_pm); + /* + * NOTE: comments for num_online_cpus() point out that it's + * only a snapshot so we need to be careful. It should be OK + * for us to use, though. It's important for us not to miss + * if we're the last CPU going down so it would only be a + * problem if a CPU went offline right after we did the check + * AND that CPU was not idle AND that CPU was the last non-idle + * CPU. That can't happen. CPUs would have to come out of idle + * before the CPU could go offline. + */ + if (cpus_in_pm < num_online_cpus()) + return NOTIFY_OK; + break; + case CPU_PM_ENTER_FAILED: + case CPU_PM_EXIT: + atomic_dec(&drv->cpus_in_pm); + return NOTIFY_OK; + default: + return NOTIFY_DONE; + } + + /* + * It's likely we're on the last CPU. Grab the drv->lock and write + * out the sleep/wake commands to RPMH hardware. Grabbing the lock + * means that if we race with another CPU coming up we are still + * guaranteed to be safe. If another CPU came up just after we checked + * and has grabbed the lock or started an active transfer then we'll + * notice we're busy and abort. If another CPU comes up after we start + * flushing it will be blocked from starting an active transfer until + * we're done flushing. If another CPU starts an active transfer after + * we release the lock we're still OK because we're no longer the last + * CPU. + */ + if (spin_trylock(&drv->lock)) { + if (rpmh_rsc_ctrlr_is_busy(drv) || rpmh_flush(&drv->client)) + ret = NOTIFY_BAD; + spin_unlock(&drv->lock); + } else { + /* Another CPU must be up */ + return NOTIFY_OK; + } + + if (ret == NOTIFY_BAD) { + /* Double-check if we're here because someone else is up */ + if (cpus_in_pm < num_online_cpus()) + ret = NOTIFY_OK; + else + /* We won't be called w/ CPU_PM_ENTER_FAILED */ + atomic_dec(&drv->cpus_in_pm); + } + + return ret; +} + +/** + * rpmh_rsc_pd_callback() - Check if any of the AMCs are busy. + * @nfb: Pointer to the genpd notifier block in struct rsc_drv. + * @action: GENPD_NOTIFY_PRE_OFF, GENPD_NOTIFY_OFF, GENPD_NOTIFY_PRE_ON or GENPD_NOTIFY_ON. + * @v: Unused + * + * This function is given to dev_pm_genpd_add_notifier() so we can be informed + * about when cluster-pd is going down. When cluster go down we know no more active + * transfers will be started so we write sleep/wake sets. This function gets + * called from cpuidle code paths and also at system suspend time. + * + * If AMCs are not busy then writes cached sleep and wake messages to TCSes. + * The firmware then takes care of triggering them when entering deepest low power modes. + * + * Return: + * * NOTIFY_OK - success + * * NOTIFY_BAD - failure + */ +static int rpmh_rsc_pd_callback(struct notifier_block *nfb, + unsigned long action, void *v) +{ + struct rsc_drv *drv = container_of(nfb, struct rsc_drv, genpd_nb); + + /* We don't need to lock as genpd on/off are serialized */ + if ((action == GENPD_NOTIFY_PRE_OFF) && + (rpmh_rsc_ctrlr_is_busy(drv) || rpmh_flush(&drv->client))) + return NOTIFY_BAD; + + return NOTIFY_OK; +} + +static int rpmh_rsc_pd_attach(struct rsc_drv *drv, struct device *dev) +{ + int ret; + + pm_runtime_enable(dev); + drv->genpd_nb.notifier_call = rpmh_rsc_pd_callback; + ret = dev_pm_genpd_add_notifier(dev, &drv->genpd_nb); + if (ret) + pm_runtime_disable(dev); + + return ret; +} + +static int rpmh_probe_tcs_config(struct platform_device *pdev, struct rsc_drv *drv) +{ + struct tcs_type_config { + u32 type; + u32 n; + } tcs_cfg[TCS_TYPE_NR] = { { 0 } }; + struct device_node *dn = pdev->dev.of_node; + u32 config, max_tcs, ncpt, offset; + int i, ret, n, st = 0; + struct tcs_group *tcs; + + ret = of_property_read_u32(dn, "qcom,tcs-offset", &offset); + if (ret) + return ret; + drv->tcs_base = drv->base + offset; + + config = readl_relaxed(drv->base + drv->regs[DRV_PRNT_CHLD_CONFIG]); + + max_tcs = config; + max_tcs &= DRV_NUM_TCS_MASK << (DRV_NUM_TCS_SHIFT * drv->id); + max_tcs = max_tcs >> (DRV_NUM_TCS_SHIFT * drv->id); + + ncpt = config & (DRV_NCPT_MASK << DRV_NCPT_SHIFT); + ncpt = ncpt >> DRV_NCPT_SHIFT; + + n = of_property_count_u32_elems(dn, "qcom,tcs-config"); + if (n != 2 * TCS_TYPE_NR) + return -EINVAL; + + for (i = 0; i < TCS_TYPE_NR; i++) { + ret = of_property_read_u32_index(dn, "qcom,tcs-config", + i * 2, &tcs_cfg[i].type); + if (ret) + return ret; + if (tcs_cfg[i].type >= TCS_TYPE_NR) + return -EINVAL; + + ret = of_property_read_u32_index(dn, "qcom,tcs-config", + i * 2 + 1, &tcs_cfg[i].n); + if (ret) + return ret; + if (tcs_cfg[i].n > MAX_TCS_PER_TYPE) + return -EINVAL; + } + + for (i = 0; i < TCS_TYPE_NR; i++) { + tcs = &drv->tcs[tcs_cfg[i].type]; + if (tcs->drv) + return -EINVAL; + tcs->drv = drv; + tcs->type = tcs_cfg[i].type; + tcs->num_tcs = tcs_cfg[i].n; + tcs->ncpt = ncpt; + + if (!tcs->num_tcs || tcs->type == CONTROL_TCS) + continue; + + if (st + tcs->num_tcs > max_tcs || + st + tcs->num_tcs >= BITS_PER_BYTE * sizeof(tcs->mask)) + return -EINVAL; + + tcs->mask = ((1 << tcs->num_tcs) - 1) << st; + tcs->offset = st; + st += tcs->num_tcs; + } + + drv->num_tcs = st; + + return 0; +} + +static int rpmh_rsc_probe(struct platform_device *pdev) +{ + struct device_node *dn = pdev->dev.of_node; + struct rsc_drv *drv; + char drv_id[10] = {0}; + int ret, irq; + u32 solver_config; + u32 rsc_id; + + /* + * Even though RPMh doesn't directly use cmd-db, all of its children + * do. To avoid adding this check to our children we'll do it now. + */ + ret = cmd_db_ready(); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "Command DB not available (%d)\n", + ret); + return ret; + } + + drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); + if (!drv) + return -ENOMEM; + + ret = of_property_read_u32(dn, "qcom,drv-id", &drv->id); + if (ret) + return ret; + + drv->name = of_get_property(dn, "label", NULL); + if (!drv->name) + drv->name = dev_name(&pdev->dev); + + snprintf(drv_id, ARRAY_SIZE(drv_id), "drv-%d", drv->id); + drv->base = devm_platform_ioremap_resource_byname(pdev, drv_id); + if (IS_ERR(drv->base)) + return PTR_ERR(drv->base); + + rsc_id = readl_relaxed(drv->base + RSC_DRV_ID); + drv->ver.major = rsc_id & (MAJOR_VER_MASK << MAJOR_VER_SHIFT); + drv->ver.major >>= MAJOR_VER_SHIFT; + drv->ver.minor = rsc_id & (MINOR_VER_MASK << MINOR_VER_SHIFT); + drv->ver.minor >>= MINOR_VER_SHIFT; + + if (drv->ver.major == 3) + drv->regs = rpmh_rsc_reg_offset_ver_3_0; + else + drv->regs = rpmh_rsc_reg_offset_ver_2_7; + + ret = rpmh_probe_tcs_config(pdev, drv); + if (ret) + return ret; + + spin_lock_init(&drv->lock); + init_waitqueue_head(&drv->tcs_wait); + bitmap_zero(drv->tcs_in_use, MAX_TCS_NR); + + irq = platform_get_irq(pdev, drv->id); + if (irq < 0) + return irq; + + ret = devm_request_irq(&pdev->dev, irq, tcs_tx_done, + IRQF_TRIGGER_HIGH | IRQF_NO_SUSPEND, + drv->name, drv); + if (ret) + return ret; + + /* + * CPU PM/genpd notification are not required for controllers that support + * 'HW solver' mode where they can be in autonomous mode executing low + * power mode to power down. + */ + solver_config = readl_relaxed(drv->base + drv->regs[DRV_SOLVER_CONFIG]); + solver_config &= DRV_HW_SOLVER_MASK << DRV_HW_SOLVER_SHIFT; + solver_config = solver_config >> DRV_HW_SOLVER_SHIFT; + if (!solver_config) { + if (pdev->dev.pm_domain) { + ret = rpmh_rsc_pd_attach(drv, &pdev->dev); + if (ret) + return ret; + } else { + drv->rsc_pm.notifier_call = rpmh_rsc_cpu_pm_callback; + cpu_pm_register_notifier(&drv->rsc_pm); + } + } + + /* Enable the active TCS to send requests immediately */ + writel_relaxed(drv->tcs[ACTIVE_TCS].mask, + drv->tcs_base + drv->regs[RSC_DRV_IRQ_ENABLE]); + + spin_lock_init(&drv->client.cache_lock); + INIT_LIST_HEAD(&drv->client.cache); + INIT_LIST_HEAD(&drv->client.batch_cache); + + dev_set_drvdata(&pdev->dev, drv); + drv->dev = &pdev->dev; + + ret = devm_of_platform_populate(&pdev->dev); + if (ret && pdev->dev.pm_domain) { + dev_pm_genpd_remove_notifier(&pdev->dev); + pm_runtime_disable(&pdev->dev); + } + + return ret; +} + +static const struct of_device_id rpmh_drv_match[] = { + { .compatible = "qcom,rpmh-rsc", }, + { } +}; +MODULE_DEVICE_TABLE(of, rpmh_drv_match); + +static struct platform_driver rpmh_driver = { + .probe = rpmh_rsc_probe, + .driver = { + .name = "rpmh", + .of_match_table = rpmh_drv_match, + .suppress_bind_attrs = true, + }, +}; + +static int __init rpmh_driver_init(void) +{ + return platform_driver_register(&rpmh_driver); +} +core_initcall(rpmh_driver_init); + +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. RPMh Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c new file mode 100644 index 0000000000..8903ed9563 --- /dev/null +++ b/drivers/soc/qcom/rpmh.c @@ -0,0 +1,502 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "rpmh-internal.h" + +#define RPMH_TIMEOUT_MS msecs_to_jiffies(10000) + +#define DEFINE_RPMH_MSG_ONSTACK(device, s, q, name) \ + struct rpmh_request name = { \ + .msg = { \ + .state = s, \ + .cmds = name.cmd, \ + .num_cmds = 0, \ + .wait_for_compl = true, \ + }, \ + .cmd = { { 0 } }, \ + .completion = q, \ + .dev = device, \ + .needs_free = false, \ + } + +#define ctrlr_to_drv(ctrlr) container_of(ctrlr, struct rsc_drv, client) + +/** + * struct cache_req: the request object for caching + * + * @addr: the address of the resource + * @sleep_val: the sleep vote + * @wake_val: the wake vote + * @list: linked list obj + */ +struct cache_req { + u32 addr; + u32 sleep_val; + u32 wake_val; + struct list_head list; +}; + +/** + * struct batch_cache_req - An entry in our batch catch + * + * @list: linked list obj + * @count: number of messages + * @rpm_msgs: the messages + */ + +struct batch_cache_req { + struct list_head list; + int count; + struct rpmh_request rpm_msgs[]; +}; + +static struct rpmh_ctrlr *get_rpmh_ctrlr(const struct device *dev) +{ + struct rsc_drv *drv = dev_get_drvdata(dev->parent); + + return &drv->client; +} + +void rpmh_tx_done(const struct tcs_request *msg) +{ + struct rpmh_request *rpm_msg = container_of(msg, struct rpmh_request, + msg); + struct completion *compl = rpm_msg->completion; + bool free = rpm_msg->needs_free; + + if (!compl) + goto exit; + + /* Signal the blocking thread we are done */ + complete(compl); + +exit: + if (free) + kfree(rpm_msg); +} + +static struct cache_req *__find_req(struct rpmh_ctrlr *ctrlr, u32 addr) +{ + struct cache_req *p, *req = NULL; + + list_for_each_entry(p, &ctrlr->cache, list) { + if (p->addr == addr) { + req = p; + break; + } + } + + return req; +} + +static struct cache_req *cache_rpm_request(struct rpmh_ctrlr *ctrlr, + enum rpmh_state state, + struct tcs_cmd *cmd) +{ + struct cache_req *req; + unsigned long flags; + u32 old_sleep_val, old_wake_val; + + spin_lock_irqsave(&ctrlr->cache_lock, flags); + req = __find_req(ctrlr, cmd->addr); + if (req) + goto existing; + + req = kzalloc(sizeof(*req), GFP_ATOMIC); + if (!req) { + req = ERR_PTR(-ENOMEM); + goto unlock; + } + + req->addr = cmd->addr; + req->sleep_val = req->wake_val = UINT_MAX; + list_add_tail(&req->list, &ctrlr->cache); + +existing: + old_sleep_val = req->sleep_val; + old_wake_val = req->wake_val; + + switch (state) { + case RPMH_ACTIVE_ONLY_STATE: + case RPMH_WAKE_ONLY_STATE: + req->wake_val = cmd->data; + break; + case RPMH_SLEEP_STATE: + req->sleep_val = cmd->data; + break; + } + + ctrlr->dirty |= (req->sleep_val != old_sleep_val || + req->wake_val != old_wake_val) && + req->sleep_val != UINT_MAX && + req->wake_val != UINT_MAX; + +unlock: + spin_unlock_irqrestore(&ctrlr->cache_lock, flags); + + return req; +} + +/** + * __rpmh_write: Cache and send the RPMH request + * + * @dev: The device making the request + * @state: Active/Sleep request type + * @rpm_msg: The data that needs to be sent (cmds). + * + * Cache the RPMH request and send if the state is ACTIVE_ONLY. + * SLEEP/WAKE_ONLY requests are not sent to the controller at + * this time. Use rpmh_flush() to send them to the controller. + */ +static int __rpmh_write(const struct device *dev, enum rpmh_state state, + struct rpmh_request *rpm_msg) +{ + struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev); + int ret = -EINVAL; + struct cache_req *req; + int i; + + /* Cache the request in our store and link the payload */ + for (i = 0; i < rpm_msg->msg.num_cmds; i++) { + req = cache_rpm_request(ctrlr, state, &rpm_msg->msg.cmds[i]); + if (IS_ERR(req)) + return PTR_ERR(req); + } + + if (state == RPMH_ACTIVE_ONLY_STATE) { + ret = rpmh_rsc_send_data(ctrlr_to_drv(ctrlr), &rpm_msg->msg); + } else { + /* Clean up our call by spoofing tx_done */ + ret = 0; + rpmh_tx_done(&rpm_msg->msg); + } + + return ret; +} + +static int __fill_rpmh_msg(struct rpmh_request *req, enum rpmh_state state, + const struct tcs_cmd *cmd, u32 n) +{ + if (!cmd || !n || n > MAX_RPMH_PAYLOAD) + return -EINVAL; + + memcpy(req->cmd, cmd, n * sizeof(*cmd)); + + req->msg.state = state; + req->msg.cmds = req->cmd; + req->msg.num_cmds = n; + + return 0; +} + +/** + * rpmh_write_async: Write a set of RPMH commands + * + * @dev: The device making the request + * @state: Active/sleep set + * @cmd: The payload data + * @n: The number of elements in payload + * + * Write a set of RPMH commands, the order of commands is maintained + * and will be sent as a single shot. + */ +int rpmh_write_async(const struct device *dev, enum rpmh_state state, + const struct tcs_cmd *cmd, u32 n) +{ + struct rpmh_request *rpm_msg; + int ret; + + rpm_msg = kzalloc(sizeof(*rpm_msg), GFP_ATOMIC); + if (!rpm_msg) + return -ENOMEM; + rpm_msg->needs_free = true; + + ret = __fill_rpmh_msg(rpm_msg, state, cmd, n); + if (ret) { + kfree(rpm_msg); + return ret; + } + + return __rpmh_write(dev, state, rpm_msg); +} +EXPORT_SYMBOL_GPL(rpmh_write_async); + +/** + * rpmh_write: Write a set of RPMH commands and block until response + * + * @dev: The device making the request + * @state: Active/sleep set + * @cmd: The payload data + * @n: The number of elements in @cmd + * + * May sleep. Do not call from atomic contexts. + */ +int rpmh_write(const struct device *dev, enum rpmh_state state, + const struct tcs_cmd *cmd, u32 n) +{ + DECLARE_COMPLETION_ONSTACK(compl); + DEFINE_RPMH_MSG_ONSTACK(dev, state, &compl, rpm_msg); + int ret; + + ret = __fill_rpmh_msg(&rpm_msg, state, cmd, n); + if (ret) + return ret; + + ret = __rpmh_write(dev, state, &rpm_msg); + if (ret) + return ret; + + ret = wait_for_completion_timeout(&compl, RPMH_TIMEOUT_MS); + WARN_ON(!ret); + return (ret > 0) ? 0 : -ETIMEDOUT; +} +EXPORT_SYMBOL_GPL(rpmh_write); + +static void cache_batch(struct rpmh_ctrlr *ctrlr, struct batch_cache_req *req) +{ + unsigned long flags; + + spin_lock_irqsave(&ctrlr->cache_lock, flags); + list_add_tail(&req->list, &ctrlr->batch_cache); + ctrlr->dirty = true; + spin_unlock_irqrestore(&ctrlr->cache_lock, flags); +} + +static int flush_batch(struct rpmh_ctrlr *ctrlr) +{ + struct batch_cache_req *req; + const struct rpmh_request *rpm_msg; + int ret = 0; + int i; + + /* Send Sleep/Wake requests to the controller, expect no response */ + list_for_each_entry(req, &ctrlr->batch_cache, list) { + for (i = 0; i < req->count; i++) { + rpm_msg = req->rpm_msgs + i; + ret = rpmh_rsc_write_ctrl_data(ctrlr_to_drv(ctrlr), + &rpm_msg->msg); + if (ret) + break; + } + } + + return ret; +} + +/** + * rpmh_write_batch: Write multiple sets of RPMH commands and wait for the + * batch to finish. + * + * @dev: the device making the request + * @state: Active/sleep set + * @cmd: The payload data + * @n: The array of count of elements in each batch, 0 terminated. + * + * Write a request to the RSC controller without caching. If the request + * state is ACTIVE, then the requests are treated as completion request + * and sent to the controller immediately. The function waits until all the + * commands are complete. If the request was to SLEEP or WAKE_ONLY, then the + * request is sent as fire-n-forget and no ack is expected. + * + * May sleep. Do not call from atomic contexts for ACTIVE_ONLY requests. + */ +int rpmh_write_batch(const struct device *dev, enum rpmh_state state, + const struct tcs_cmd *cmd, u32 *n) +{ + struct batch_cache_req *req; + struct rpmh_request *rpm_msgs; + struct completion *compls; + struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev); + unsigned long time_left; + int count = 0; + int ret, i; + void *ptr; + + if (!cmd || !n) + return -EINVAL; + + while (n[count] > 0) + count++; + if (!count) + return -EINVAL; + + ptr = kzalloc(sizeof(*req) + + count * (sizeof(req->rpm_msgs[0]) + sizeof(*compls)), + GFP_ATOMIC); + if (!ptr) + return -ENOMEM; + + req = ptr; + compls = ptr + sizeof(*req) + count * sizeof(*rpm_msgs); + + req->count = count; + rpm_msgs = req->rpm_msgs; + + for (i = 0; i < count; i++) { + __fill_rpmh_msg(rpm_msgs + i, state, cmd, n[i]); + cmd += n[i]; + } + + if (state != RPMH_ACTIVE_ONLY_STATE) { + cache_batch(ctrlr, req); + return 0; + } + + for (i = 0; i < count; i++) { + struct completion *compl = &compls[i]; + + init_completion(compl); + rpm_msgs[i].completion = compl; + ret = rpmh_rsc_send_data(ctrlr_to_drv(ctrlr), &rpm_msgs[i].msg); + if (ret) { + pr_err("Error(%d) sending RPMH message addr=%#x\n", + ret, rpm_msgs[i].msg.cmds[0].addr); + break; + } + } + + time_left = RPMH_TIMEOUT_MS; + while (i--) { + time_left = wait_for_completion_timeout(&compls[i], time_left); + if (!time_left) { + /* + * Better hope they never finish because they'll signal + * the completion that we're going to free once + * we've returned from this function. + */ + WARN_ON(1); + ret = -ETIMEDOUT; + goto exit; + } + } + +exit: + kfree(ptr); + + return ret; +} +EXPORT_SYMBOL_GPL(rpmh_write_batch); + +static int is_req_valid(struct cache_req *req) +{ + return (req->sleep_val != UINT_MAX && + req->wake_val != UINT_MAX && + req->sleep_val != req->wake_val); +} + +static int send_single(struct rpmh_ctrlr *ctrlr, enum rpmh_state state, + u32 addr, u32 data) +{ + DEFINE_RPMH_MSG_ONSTACK(NULL, state, NULL, rpm_msg); + + /* Wake sets are always complete and sleep sets are not */ + rpm_msg.msg.wait_for_compl = (state == RPMH_WAKE_ONLY_STATE); + rpm_msg.cmd[0].addr = addr; + rpm_msg.cmd[0].data = data; + rpm_msg.msg.num_cmds = 1; + + return rpmh_rsc_write_ctrl_data(ctrlr_to_drv(ctrlr), &rpm_msg.msg); +} + +/** + * rpmh_flush() - Flushes the buffered sleep and wake sets to TCSes + * + * @ctrlr: Controller making request to flush cached data + * + * Return: + * * 0 - Success + * * Error code - Otherwise + */ +int rpmh_flush(struct rpmh_ctrlr *ctrlr) +{ + struct cache_req *p; + int ret = 0; + + lockdep_assert_irqs_disabled(); + + /* + * Currently rpmh_flush() is only called when we think we're running + * on the last processor. If the lock is busy it means another + * processor is up and it's better to abort than spin. + */ + if (!spin_trylock(&ctrlr->cache_lock)) + return -EBUSY; + + if (!ctrlr->dirty) { + pr_debug("Skipping flush, TCS has latest data.\n"); + goto write_next_wakeup; + } + + /* Invalidate the TCSes first to avoid stale data */ + rpmh_rsc_invalidate(ctrlr_to_drv(ctrlr)); + + /* First flush the cached batch requests */ + ret = flush_batch(ctrlr); + if (ret) + goto exit; + + list_for_each_entry(p, &ctrlr->cache, list) { + if (!is_req_valid(p)) { + pr_debug("%s: skipping RPMH req: a:%#x s:%#x w:%#x", + __func__, p->addr, p->sleep_val, p->wake_val); + continue; + } + ret = send_single(ctrlr, RPMH_SLEEP_STATE, p->addr, + p->sleep_val); + if (ret) + goto exit; + ret = send_single(ctrlr, RPMH_WAKE_ONLY_STATE, p->addr, + p->wake_val); + if (ret) + goto exit; + } + + ctrlr->dirty = false; + +write_next_wakeup: + rpmh_rsc_write_next_wakeup(ctrlr_to_drv(ctrlr)); +exit: + spin_unlock(&ctrlr->cache_lock); + return ret; +} + +/** + * rpmh_invalidate: Invalidate sleep and wake sets in batch_cache + * + * @dev: The device making the request + * + * Invalidate the sleep and wake values in batch_cache. + */ +void rpmh_invalidate(const struct device *dev) +{ + struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev); + struct batch_cache_req *req, *tmp; + unsigned long flags; + + spin_lock_irqsave(&ctrlr->cache_lock, flags); + list_for_each_entry_safe(req, tmp, &ctrlr->batch_cache, list) + kfree(req); + INIT_LIST_HEAD(&ctrlr->batch_cache); + ctrlr->dirty = true; + spin_unlock_irqrestore(&ctrlr->cache_lock, flags); +} +EXPORT_SYMBOL_GPL(rpmh_invalidate); diff --git a/include/soc/qcom/cmd-db.h b/include/soc/qcom/cmd-db.h new file mode 100644 index 0000000000..47a6cab75e --- /dev/null +++ b/include/soc/qcom/cmd-db.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef __QCOM_COMMAND_DB_H__ +#define __QCOM_COMMAND_DB_H__ + +#include + +enum cmd_db_hw_type { + CMD_DB_HW_INVALID = 0, + CMD_DB_HW_MIN = 3, + CMD_DB_HW_ARC = CMD_DB_HW_MIN, + CMD_DB_HW_VRM = 4, + CMD_DB_HW_BCM = 5, + CMD_DB_HW_MAX = CMD_DB_HW_BCM, + CMD_DB_HW_ALL = 0xff, +}; + +#if IS_ENABLED(CONFIG_QCOM_COMMAND_DB) +u32 cmd_db_read_addr(const char *resource_id); + +const void *cmd_db_read_aux_data(const char *resource_id, size_t *len); + +bool cmd_db_match_resource_addr(u32 addr1, u32 addr2); + +enum cmd_db_hw_type cmd_db_read_slave_id(const char *resource_id); + +int cmd_db_ready(void); +#else +static inline u32 cmd_db_read_addr(const char *resource_id) +{ return 0; } + +static inline const void *cmd_db_read_aux_data(const char *resource_id, size_t *len) +{ return ERR_PTR(-ENODEV); } + +static inline bool cmd_db_match_resource_addr(u32 addr1, u32 addr2) +{ return false; } + +static inline enum cmd_db_hw_type cmd_db_read_slave_id(const char *resource_id) +{ return -ENODEV; } + +static inline int cmd_db_ready(void) +{ return -ENODEV; } +#endif /* CONFIG_QCOM_COMMAND_DB */ +#endif /* __QCOM_COMMAND_DB_H__ */ diff --git a/include/soc/qcom/rpmh.h b/include/soc/qcom/rpmh.h new file mode 100644 index 0000000000..bdbee1a97d --- /dev/null +++ b/include/soc/qcom/rpmh.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. + */ + +#ifndef __SOC_QCOM_RPMH_H__ +#define __SOC_QCOM_RPMH_H__ + +#include +#include + + +#if IS_ENABLED(CONFIG_QCOM_RPMH) +int rpmh_write(const struct device *dev, enum rpmh_state state, + const struct tcs_cmd *cmd, u32 n); + +int rpmh_write_async(const struct device *dev, enum rpmh_state state, + const struct tcs_cmd *cmd, u32 n); + +int rpmh_write_batch(const struct device *dev, enum rpmh_state state, + const struct tcs_cmd *cmd, u32 *n); + +void rpmh_invalidate(const struct device *dev); + +#else + +static inline int rpmh_write(const struct device *dev, enum rpmh_state state, + const struct tcs_cmd *cmd, u32 n) +{ return -ENODEV; } + +static inline int rpmh_write_async(const struct device *dev, + enum rpmh_state state, + const struct tcs_cmd *cmd, u32 n) +{ return -ENODEV; } + +static inline int rpmh_write_batch(const struct device *dev, + enum rpmh_state state, + const struct tcs_cmd *cmd, u32 *n) +{ return -ENODEV; } + +static inline void rpmh_invalidate(const struct device *dev) +{ +} + +#endif /* CONFIG_QCOM_RPMH */ + +#endif /* __SOC_QCOM_RPMH_H__ */ diff --git a/include/soc/qcom/tcs.h b/include/soc/qcom/tcs.h new file mode 100644 index 0000000000..3acca067c7 --- /dev/null +++ b/include/soc/qcom/tcs.h @@ -0,0 +1,81 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. + */ + +#ifndef __SOC_QCOM_TCS_H__ +#define __SOC_QCOM_TCS_H__ + +#define MAX_RPMH_PAYLOAD 16 + +/** + * rpmh_state: state for the request + * + * RPMH_SLEEP_STATE: State of the resource when the processor subsystem + * is powered down. There is no client using the + * resource actively. + * RPMH_WAKE_ONLY_STATE: Resume resource state to the value previously + * requested before the processor was powered down. + * RPMH_ACTIVE_ONLY_STATE: Active or AMC mode requests. Resource state + * is aggregated immediately. + */ +enum rpmh_state { + RPMH_SLEEP_STATE, + RPMH_WAKE_ONLY_STATE, + RPMH_ACTIVE_ONLY_STATE, +}; + +/** + * struct tcs_cmd: an individual request to RPMH. + * + * @addr: the address of the resource slv_id:18:16 | offset:0:15 + * @data: the resource state request + * @wait: ensure that this command is complete before returning. + * Setting "wait" here only makes sense during rpmh_write_batch() for + * active-only transfers, this is because: + * rpmh_write() - Always waits. + * (DEFINE_RPMH_MSG_ONSTACK will set .wait_for_compl) + * rpmh_write_async() - Never waits. + * (There's no request completion callback) + */ +struct tcs_cmd { + u32 addr; + u32 data; + u32 wait; +}; + +/** + * struct tcs_request: A set of tcs_cmds sent together in a TCS + * + * @state: state for the request. + * @wait_for_compl: wait until we get a response from the h/w accelerator + * (same as setting cmd->wait for all commands in the request) + * @num_cmds: the number of @cmds in this request + * @cmds: an array of tcs_cmds + */ +struct tcs_request { + enum rpmh_state state; + u32 wait_for_compl; + u32 num_cmds; + struct tcs_cmd *cmds; +}; + +#define BCM_TCS_CMD_COMMIT_SHFT 30 +#define BCM_TCS_CMD_COMMIT_MASK 0x40000000 +#define BCM_TCS_CMD_VALID_SHFT 29 +#define BCM_TCS_CMD_VALID_MASK 0x20000000 +#define BCM_TCS_CMD_VOTE_X_SHFT 14 +#define BCM_TCS_CMD_VOTE_MASK 0x3fff +#define BCM_TCS_CMD_VOTE_Y_SHFT 0 +#define BCM_TCS_CMD_VOTE_Y_MASK 0xfffc000 + +/* Construct a Bus Clock Manager (BCM) specific TCS command */ +#define BCM_TCS_CMD(commit, valid, vote_x, vote_y) \ + (((commit) << BCM_TCS_CMD_COMMIT_SHFT) | \ + ((valid) << BCM_TCS_CMD_VALID_SHFT) | \ + ((cpu_to_le32(vote_x) & \ + BCM_TCS_CMD_VOTE_MASK) << BCM_TCS_CMD_VOTE_X_SHFT) | \ + ((cpu_to_le32(vote_y) & \ + BCM_TCS_CMD_VOTE_MASK) << BCM_TCS_CMD_VOTE_Y_SHFT)) + +#endif /* __SOC_QCOM_TCS_H__ */