From: Robert Marko <robert.marko@sartura.hr>
Date: Fri, 20 May 2022 11:46:31 +0000 (+0200)
Subject: arm: mvebu: dts: sync DTS
X-Git-Url: http://git.dujemihanovic.xyz/img/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=58b39652bb1ac071c4338b999d1529d0c4163445;p=u-boot.git

arm: mvebu: dts: sync DTS

Update the uDPU DTS to the version that is pending upstream [1][2][3][4].

[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-4-robert.marko@sartura.hr/
[2] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-5-robert.marko@sartura.hr/
[3] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-6-robert.marko@sartura.hr/
[4] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-7-robert.marko@sartura.hr/

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
---

diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts
index 1f534c0c65..f21a855fc6 100644
--- a/arch/arm/dts/armada-3720-uDPU.dts
+++ b/arch/arm/dts/armada-3720-uDPU.dts
@@ -16,7 +16,7 @@
 
 / {
 	model = "Methode uDPU Board";
-	compatible = "methode,udpu", "marvell,armada3720";
+	compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -28,35 +28,34 @@
 	};
 
 	leds {
-		pinctrl-names = "default";
 		compatible = "gpio-leds";
 
-		power1 {
+		led-power1 {
 			label = "udpu:green:power";
 			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
 		};
 
-		power2 {
+		led-power2 {
 			label = "udpu:red:power";
 			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
 		};
 
-		network1 {
+		led-network1 {
 			label = "udpu:green:network";
 			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
 		};
 
-		network2 {
+		led-network2 {
 			label = "udpu:red:network";
 			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
 		};
 
-		alarm1 {
+		led-alarm1 {
 			label = "udpu:green:alarm";
 			gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
 		};
 
-		alarm2 {
+		led-alarm2 {
 			label = "udpu:red:alarm";
 			gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
 		};
@@ -99,7 +98,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi_quad_pins>;
 
-	spi-flash@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <54000000>;
@@ -153,14 +152,12 @@
 	scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
-	nct375@48 {
-		status = "okay";
+	temp-sensor@48 {
 		compatible = "ti,tmp75c";
 		reg = <0x48>;
 	};
 
-	nct375@49 {
-		status = "okay";
+	temp-sensor@49 {
 		compatible = "ti,tmp75c";
 		reg = <0x49>;
 	};