--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk3588-u-boot.dtsi"
+
+&fspim2_pins {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&sfc {
+ flash@0 {
+ bootph-pre-ram;
+ bootph-some-ram;
+ };
+};
+
+/* USB A out */
+&usb_host1_xhci {
+ snps,dis_u3_susphy_quirk;
+};
- 3.5mm Headphone out, 2.0mm PH-2A Mic in
- 5V Fan connector, PWM beeper, IR receiver, RTC battery connector
+config TARGET_GENBOOK_CM5_RK3588
+ bool "Cool Pi CM5 GenBook"
+ select BOARD_LATE_INIT
+ help
+ GeenBook is a notebook based on Rockchip RK3588, and works as a carrier
+ board connect with CM5 SOM.
+
+ Specification:
+ - Rockchip RK3588
+ - LPDDR5X 8/32 GB
+ - eMMC 64 GB
+ - HDMI Type A out x 1
+ - USB 3.0 Host x 1
+ - USB-C 3.0 with DisplayPort AltMode
+ - PCIE M.2 E Key for RTL8852BE Wireless connection
+ - PCIE M.2 M Key for NVME connection
+ - eDP panel with 1920x1080
+
config TARGET_JAGUAR_RK3588
bool "Theobroma Systems SBC-RK3588-AMR (Jaguar)"
select BOARD_LATE_INIT
default 0x00a00000
source "board/armsom/sige7-rk3588/Kconfig"
+source "board/coolpi/genbook_cm5_rk3588/Kconfig"
source "board/edgeble/neural-compute-module-6/Kconfig"
source "board/friendlyelec/cm3588-nas-rk3588/Kconfig"
source "board/friendlyelec/nanopc-t6-rk3588/Kconfig"
--- /dev/null
+if TARGET_GENBOOK_CM5_RK3588
+
+config SYS_BOARD
+ default "genbook_cm5_rk3588"
+
+config SYS_VENDOR
+ default "coolpi"
+
+config SYS_CONFIG_NAME
+ default "genbook-cm5-rk3588"
+
+endif
--- /dev/null
+GENBOOK-CM5-RK3588
+M: Andy Yan <andyshrk@163.com>
+S: Maintained
+F: board/coolpi/genbook-cm5-rk3588
+F: include/configs/genbook-cm5-rk3588.h
+F: configs/coolpi-cm5-genbook-rk3588_defconfig
+F: arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi
--- /dev/null
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SF_DEFAULT_SPEED=24000000
+CONFIG_SF_DEFAULT_MODE=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-coolpi-cm5-genbook"
+CONFIG_ROCKCHIP_RK3588=y
+CONFIG_ROCKCHIP_SPI_IMAGE=y
+CONFIG_SPL_SERIAL=y
+CONFIG_TARGET_GENBOOK_CM5_RK3588=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_SF_DEFAULT_BUS=5
+CONFIG_DEBUG_UART_BASE=0xFEB50000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-coolpi-cm5-genbook.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
+CONFIG_SPL_ATF=y
+# CONFIG_CMD_BIND is not set
+# CONFIG_CMD_FASTBOOT is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_AHCI_PCI=y
+CONFIG_DWC_AHCI=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_SPL_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_XMC=y
+CONFIG_SPI_FLASH_XTX=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_PHY_ROCKCHIP_USBDP=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_SCSI=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_ROCKCHIP_SFC=y
+CONFIG_ROCKCHIP_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_ERRNO_STR=y
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+
+
+GenBook
+=======
+Cool Pi GenBook is a laptop powered by RK3588, it works with a
+carrier board connect with CM5.
+
+Specification:
+* Rockchip RK3588
+* LPDDR5X 8/32 GB
+* eMMC 64 GB
+* SPI Nor 8 MB
+* HDMI Type A out x 1
+* USB 3.0 Host x 1
+* USB-C 3.0 with DisplayPort AltMode
+* PCIE M.2 E Key for RTL8852BE Wireless connection
+* PCIE M.2 M Key for NVME connection
+* eDP panel with 1920x1080
+
+Here is the step-by-step to compile and boot to U-Boot on GenBook.
+
+Get the TF-A and DDR init (TPL) binaries
+----------------------------------------
+
+.. prompt:: bash
+
+ > cd u-boot
+ > export ROCKCHIP_TPL=../rkbin/bin/rk35/rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.17.bin
+ > export BL31=../rkbin/bin/rk35/rk3588_bl31_v1.46.elf
+ > make coolpi-genbook-cm5-rk3588_defconfig
+ > make CROSS_COMPILE=aarch64-linux-gnu-
+
+This will build ``u-boot-rockchip.bin`` for eMMC and ``u-boot-rockchip-spi.bin`` for SPI Nor.
+
+Write u-boot to eMMC or SPI Nor from a Linux system on the laptop
+-----------------------------------------------------------------
+
+Copy ``u-boot-rockchip.bin`` and ``u-boot-rockchip-spi.bin`` to the laptop.
+
+eMMC
+~~~~
+
+.. prompt:: bash
+
+ dd if=u-boot-rockchip.bin of=/dev/mmcblk0 bs=512 seek=64
+
+SPI Nor
+~~~~~~~
+
+.. prompt:: bash
+
+ dd if=u-boot-rockchip-spi.bin of=/dev/mtdblock0
+
+``upgrade_tool`` allows to flash the on-board SPI Nor via the USB TypeC interface
+with help of the Rockchip loader binary.
+
+To enter the USB flashing mode, connect the laptop and your HOST PC with a USB-C
+cable, reset the laptop with ``Loader Key`` pressed.
+On your PC, check with ``lsusb -d 2207:350b``).
+
+To flash U-Boot on the SPI Nor with ``upgrade_tool``:
+
+.. prompt:: bash
+
+ upgrade_tool db rk3588/MiniLoaderAll.bin
+ upgrade_tool ssd // Input 5 for SPINOR download mode
+ upgrade_tool wl 0 u-boot-rockchip-spi.bin
+ upgrade_tool rd
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+
+
+Cool Pi
+=================
+
+.. toctree::
+ :maxdepth: 2
+
+ genbook_cm5_rk3588
bsh/index
cloos/index
congatec/index
+ coolpi/index
coreboot/index
emcraft/index
emulation/index
- Xunlong Orange Pi 5 Plus (orangepi-5-plus-rk3588)
- Yanyi Tech CoolPi 4 Model B (coolpi-4b-rk3588s)
- Yanyi Tech CoolPi CM5 EVB (coolpi-cm5-evb-rk3588)
+ - Yanyi Tech CoolPi CM5 GenBook (coolpi-cm5-genbook-rk3588)
* rv1108
- Rockchip Evb-rv1108 (evb-rv1108)
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __GENBOOK_CM5_RK3588_H
+#define __GENBOOK_CM5_RK3588_H
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+ "stdout=serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0"
+
+/*
+ * As a laptop, there is no sdmmc, and we want to
+ * set usb the highest boot priority for third-part
+ * os installation.
+ */
+#define BOOT_TARGETS "usb mmc0"
+
+#include <configs/rk3588_common.h>
+
+#endif /* __GENBOOK_CM5_RK3588_H */
projects / u-boot.git / commitdiff