From: Sam Protsenko Date: Tue, 7 Nov 2023 19:06:00 +0000 (-0600) Subject: serial: s5p: Use named constants for register values X-Git-Url: http://git.dujemihanovic.xyz/img/%7B%7B%20%24style.RelPermalink%20%7D%7D?a=commitdiff_plain;h=e79f630dbf67a402aff7b34f743064eeb2569ea1;p=u-boot.git serial: s5p: Use named constants for register values Get rid of magic numbers in s5p_serial_init() when writing to UART registers. While at it, use BIT() macro for existing constants when appropriate. No functional change. Signed-off-by: Sam Protsenko Reviewed-by: Simon Glass Signed-off-by: Minkyu Kang --- diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c index c57bdd059e..6d316ccaf3 100644 --- a/drivers/serial/serial_s5p.c +++ b/drivers/serial/serial_s5p.c @@ -25,19 +25,28 @@ enum { PORT_S5L }; +#define UFCON_FIFO_EN BIT(0) +#define UFCON_RX_FIFO_RESET BIT(1) +#define UMCON_RESET_VAL 0x0 +#define ULCON_WORD_8_BIT 0x3 +#define UCON_RX_IRQ_OR_POLLING BIT(0) +#define UCON_TX_IRQ_OR_POLLING BIT(2) +#define UCON_RX_ERR_IRQ_EN BIT(6) +#define UCON_TX_IRQ_LEVEL BIT(9) + #define S5L_RX_FIFO_COUNT_SHIFT 0 #define S5L_RX_FIFO_COUNT_MASK (0xf << S5L_RX_FIFO_COUNT_SHIFT) -#define S5L_RX_FIFO_FULL (1 << 8) +#define S5L_RX_FIFO_FULL BIT(8) #define S5L_TX_FIFO_COUNT_SHIFT 4 #define S5L_TX_FIFO_COUNT_MASK (0xf << S5L_TX_FIFO_COUNT_SHIFT) -#define S5L_TX_FIFO_FULL (1 << 9) +#define S5L_TX_FIFO_FULL BIT(9) #define S5P_RX_FIFO_COUNT_SHIFT 0 #define S5P_RX_FIFO_COUNT_MASK (0xff << S5P_RX_FIFO_COUNT_SHIFT) -#define S5P_RX_FIFO_FULL (1 << 8) +#define S5P_RX_FIFO_FULL BIT(8) #define S5P_TX_FIFO_COUNT_SHIFT 16 #define S5P_TX_FIFO_COUNT_MASK (0xff << S5P_TX_FIFO_COUNT_SHIFT) -#define S5P_TX_FIFO_FULL (1 << 24) +#define S5P_TX_FIFO_FULL BIT(24) /* Information about a serial port */ struct s5p_serial_plat { @@ -80,13 +89,15 @@ static const int udivslot[] = { static void __maybe_unused s5p_serial_init(struct s5p_uart *uart) { - /* enable FIFOs, auto clear Rx FIFO */ - writel(0x3, &uart->ufcon); - writel(0, &uart->umcon); - /* 8N1 */ - writel(0x3, &uart->ulcon); + /* Enable FIFOs, auto clear Rx FIFO */ + writel(UFCON_FIFO_EN | UFCON_RX_FIFO_RESET, &uart->ufcon); + /* No auto flow control, disable nRTS signal */ + writel(UMCON_RESET_VAL, &uart->umcon); + /* 8N1, no parity bit */ + writel(ULCON_WORD_8_BIT, &uart->ulcon); /* No interrupts, no DMA, pure polling */ - writel(0x245, &uart->ucon); + writel(UCON_RX_IRQ_OR_POLLING | UCON_TX_IRQ_OR_POLLING | + UCON_RX_ERR_IRQ_EN | UCON_TX_IRQ_LEVEL, &uart->ucon); } static void __maybe_unused s5p_serial_baud(struct s5p_uart *uart, u8 reg_width,