From: Masahiro Yamada Date: Thu, 9 Jul 2020 06:08:19 +0000 (+0900) Subject: bus: uniphier-system-bus: move hardware init from board files X-Git-Url: http://git.dujemihanovic.xyz/img/%7B%7B%20%24style.RelPermalink%20%7D%7D?a=commitdiff_plain;h=862274913f8fa7195691f303807a2569c0301ed9;p=u-boot.git bus: uniphier-system-bus: move hardware init from board files Move the bus initialization code to this driver from board files. Signed-off-by: Masahiro Yamada --- diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c index 73b0f133ce..598101541b 100644 --- a/arch/arm/mach-uniphier/board_init.c +++ b/arch/arm/mach-uniphier/board_init.c @@ -13,6 +13,33 @@ #include "micro-support-card.h" #include "soc-info.h" +#define PC0CTRL 0x598000c0 + +#if defined(CONFIG_ARCH_UNIPHIER_LD4) || defined(CONFIG_ARCH_UNIPHIER_SLD8) +static void uniphier_ld4_sbc_init(void) +{ + u32 tmp; + + /* system bus output enable */ + tmp = readl(PC0CTRL); + tmp &= 0xfffffcff; + writel(tmp, PC0CTRL); +} +#endif + +#if defined(CONFIG_ARCH_UNIPHIER_PXS2) || \ + defined(CONFIG_ARCH_UNIPHIER_LD6B) || \ + defined(CONFIG_ARCH_UNIPHIER_LD11) || \ + defined(CONFIG_ARCH_UNIPHIER_LD20) || \ + defined(CONFIG_ARCH_UNIPHIER_PXS3) +static void uniphier_pxs2_sbc_init(void) +{ + /* necessary for ROM boot ?? */ + /* system bus output enable */ + writel(0x17, PC0CTRL); +} +#endif + #ifdef CONFIG_ARCH_UNIPHIER_LD20 static void uniphier_ld20_misc_init(void) { @@ -45,7 +72,6 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_PRO4) { .soc_id = UNIPHIER_PRO4_ID, - .sbc_init = uniphier_sbc_init_savepin, .pll_init = uniphier_pro4_pll_init, .clk_init = uniphier_pro4_clk_init, }, @@ -60,7 +86,6 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_PRO5) { .soc_id = UNIPHIER_PRO5_ID, - .sbc_init = uniphier_sbc_init_savepin, .clk_init = uniphier_pro5_clk_init, }, #endif @@ -81,7 +106,7 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_LD11) { .soc_id = UNIPHIER_LD11_ID, - .sbc_init = uniphier_ld11_sbc_init, + .sbc_init = uniphier_pxs2_sbc_init, .pll_init = uniphier_ld11_pll_init, .clk_init = uniphier_ld11_clk_init, }, @@ -89,7 +114,7 @@ static const struct uniphier_initdata uniphier_initdata[] = { #if defined(CONFIG_ARCH_UNIPHIER_LD20) { .soc_id = UNIPHIER_LD20_ID, - .sbc_init = uniphier_ld11_sbc_init, + .sbc_init = uniphier_pxs2_sbc_init, .pll_init = uniphier_ld20_pll_init, .clk_init = uniphier_ld20_clk_init, .misc_init = uniphier_ld20_misc_init, @@ -118,7 +143,8 @@ int board_init(void) return -EINVAL; } - initdata->sbc_init(); + if (initdata->sbc_init) + initdata->sbc_init(); support_card_init(); diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h index ee4605487f..a20cafdfad 100644 --- a/arch/arm/mach-uniphier/init.h +++ b/arch/arm/mach-uniphier/init.h @@ -34,29 +34,6 @@ int uniphier_sld8_init(const struct uniphier_board_data *bd); int uniphier_pro5_init(const struct uniphier_board_data *bd); int uniphier_pxs2_init(const struct uniphier_board_data *bd); -#if defined(CONFIG_MICRO_SUPPORT_CARD) -void uniphier_sbc_init_savepin(void); -void uniphier_ld4_sbc_init(void); -void uniphier_pxs2_sbc_init(void); -void uniphier_ld11_sbc_init(void); -#else -static inline void uniphier_sbc_init_savepin(void) -{ -} - -static inline void uniphier_ld4_sbc_init(void) -{ -} - -static inline void uniphier_pxs2_sbc_init(void) -{ -} - -static inline void uniphier_ld11_sbc_init(void) -{ -} -#endif - void uniphier_ld4_bcu_init(const struct uniphier_board_data *bd); int uniphier_memconf_2ch_init(const struct uniphier_board_data *bd); diff --git a/arch/arm/mach-uniphier/micro-support-card.c b/arch/arm/mach-uniphier/micro-support-card.c index fc266aae98..dbd156ffce 100644 --- a/arch/arm/mach-uniphier/micro-support-card.c +++ b/arch/arm/mach-uniphier/micro-support-card.c @@ -5,7 +5,7 @@ * Author: Masahiro Yamada */ -#include +#include #include #include #include @@ -90,6 +90,17 @@ static int support_card_show_revision(void) void support_card_init(void) { + struct udevice *dev; + int ret; + + /* The system bus must be initialized for access to the support card. */ + ret = uclass_get_device_by_driver(UCLASS_SIMPLE_BUS, + DM_GET_DRIVER(uniphier_system_bus_driver), + &dev); + if (ret) + return; + + /* Check DT to see if this board has the support card. */ support_card_detect(); if (!support_card_found) diff --git a/arch/arm/mach-uniphier/sbc/Makefile b/arch/arm/mach-uniphier/sbc/Makefile index 1bc912c939..1303c36c89 100644 --- a/arch/arm/mach-uniphier/sbc/Makefile +++ b/arch/arm/mach-uniphier/sbc/Makefile @@ -1,17 +1,3 @@ # SPDX-License-Identifier: GPL-2.0+ obj-y += sbc-boot.o - -ifndef CONFIG_SPL_BUILD -ifdef CONFIG_MICRO_SUPPORT_CARD -obj-y += sbc.o - -obj-$(CONFIG_ARCH_UNIPHIER_LD4) += sbc-ld4.o -obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += sbc-ld4.o -obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += sbc-pxs2.o -obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += sbc-pxs2.o -obj-$(CONFIG_ARCH_UNIPHIER_LD11) += sbc-ld11.o -obj-$(CONFIG_ARCH_UNIPHIER_LD20) += sbc-ld11.o -obj-$(CONFIG_ARCH_UNIPHIER_PXS3) += sbc-pxs2.o -endif -endif diff --git a/arch/arm/mach-uniphier/sbc/sbc-boot.c b/arch/arm/mach-uniphier/sbc/sbc-boot.c index ec22b453e0..4d04c97764 100644 --- a/arch/arm/mach-uniphier/sbc/sbc-boot.c +++ b/arch/arm/mach-uniphier/sbc/sbc-boot.c @@ -5,7 +5,8 @@ #include -#include "sbc-regs.h" +#define SBBASE0 0x58c00100 +#define SBBASE_BANK_ENABLE (0x00000001) int uniphier_sbc_boot_is_swapped(void) { diff --git a/arch/arm/mach-uniphier/sbc/sbc-ld11.c b/arch/arm/mach-uniphier/sbc/sbc-ld11.c deleted file mode 100644 index a0162e1cc8..0000000000 --- a/arch/arm/mach-uniphier/sbc/sbc-ld11.c +++ /dev/null @@ -1,26 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2016-2017 Socionext Inc. - */ - -#include -#include - -#include "../init.h" -#include "sbc-regs.h" - -void uniphier_ld11_sbc_init(void) -{ - if (!uniphier_sbc_is_enabled()) - return; - - uniphier_sbc_init_savepin(); - - /* necessary for ROM boot ?? */ - /* system bus output enable */ - writel(0x17, PC0CTRL); - - /* pins for NAND and System Bus are multiplexed */ - if (spl_boot_device() != BOOT_DEVICE_NAND) - uniphier_pin_init("system-bus"); -} diff --git a/arch/arm/mach-uniphier/sbc/sbc-ld4.c b/arch/arm/mach-uniphier/sbc/sbc-ld4.c deleted file mode 100644 index 72e9743c8f..0000000000 --- a/arch/arm/mach-uniphier/sbc/sbc-ld4.c +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2011-2015 Panasonic Corporation - * Copyright (C) 2015-2017 Socionext Inc. - */ - -#include - -#include "../init.h" -#include "sbc-regs.h" - -void uniphier_ld4_sbc_init(void) -{ - u32 tmp; - - if (!uniphier_sbc_is_enabled()) - return; - - uniphier_sbc_init_savepin(); - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); -} diff --git a/arch/arm/mach-uniphier/sbc/sbc-pxs2.c b/arch/arm/mach-uniphier/sbc/sbc-pxs2.c deleted file mode 100644 index 3275f22ce9..0000000000 --- a/arch/arm/mach-uniphier/sbc/sbc-pxs2.c +++ /dev/null @@ -1,23 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2016-2017 Socionext Inc. - */ - -#include - -#include "../init.h" -#include "sbc-regs.h" - -void uniphier_pxs2_sbc_init(void) -{ - if (!uniphier_sbc_is_enabled()) - return; - - uniphier_sbc_init_savepin(); - - /* necessary for ROM boot ?? */ - /* system bus output enable */ - writel(0x17, PC0CTRL); - - uniphier_pin_init("system-bus"); /* PXs3 */ -} diff --git a/arch/arm/mach-uniphier/sbc/sbc-regs.h b/arch/arm/mach-uniphier/sbc/sbc-regs.h index 1e9618653f..3a54b0e68d 100644 --- a/arch/arm/mach-uniphier/sbc/sbc-regs.h +++ b/arch/arm/mach-uniphier/sbc/sbc-regs.h @@ -9,74 +9,6 @@ #ifndef ARCH_SBC_REGS_H #define ARCH_SBC_REGS_H -#define SBBASE_BASE 0x58c00100 -#define SBBASE(x) (SBBASE_BASE + (x) * 0x10) - -#define SBBASE0 (SBBASE(0)) -#define SBBASE1 (SBBASE(1)) -#define SBBASE2 (SBBASE(2)) -#define SBBASE3 (SBBASE(3)) -#define SBBASE4 (SBBASE(4)) -#define SBBASE5 (SBBASE(5)) -#define SBBASE6 (SBBASE(6)) -#define SBBASE7 (SBBASE(7)) - -#define SBBASE_BANK_ENABLE (0x00000001) - -#define SBCTRL_BASE 0x58c00200 -#define SBCTRL(x, y) (SBCTRL_BASE + (x) * 0x10 + (y) * 4) - -#define SBCTRL00 SBCTRL(0, 0) -#define SBCTRL01 SBCTRL(0, 1) -#define SBCTRL02 SBCTRL(0, 2) -#define SBCTRL03 SBCTRL(0, 3) -#define SBCTRL04 (SBCTRL_BASE + 0x100) - -#define SBCTRL10 SBCTRL(1, 0) -#define SBCTRL11 SBCTRL(1, 1) -#define SBCTRL12 SBCTRL(1, 2) -#define SBCTRL13 SBCTRL(1, 3) -#define SBCTRL14 (SBCTRL_BASE + 0x110) - -#define SBCTRL20 SBCTRL(2, 0) -#define SBCTRL21 SBCTRL(2, 1) -#define SBCTRL22 SBCTRL(2, 2) -#define SBCTRL23 SBCTRL(2, 3) -#define SBCTRL24 (SBCTRL_BASE + 0x120) - -#define SBCTRL30 SBCTRL(3, 0) -#define SBCTRL31 SBCTRL(3, 1) -#define SBCTRL32 SBCTRL(3, 2) -#define SBCTRL33 SBCTRL(3, 3) -#define SBCTRL34 (SBCTRL_BASE + 0x130) - -#define SBCTRL40 SBCTRL(4, 0) -#define SBCTRL41 SBCTRL(4, 1) -#define SBCTRL42 SBCTRL(4, 2) -#define SBCTRL43 SBCTRL(4, 3) -#define SBCTRL44 (SBCTRL_BASE + 0x140) - -#define SBCTRL50 SBCTRL(5, 0) -#define SBCTRL51 SBCTRL(5, 1) -#define SBCTRL52 SBCTRL(5, 2) -#define SBCTRL53 SBCTRL(5, 3) -#define SBCTRL54 (SBCTRL_BASE + 0x150) - -#define SBCTRL60 SBCTRL(6, 0) -#define SBCTRL61 SBCTRL(6, 1) -#define SBCTRL62 SBCTRL(6, 2) -#define SBCTRL63 SBCTRL(6, 3) -#define SBCTRL64 (SBCTRL_BASE + 0x160) - -#define SBCTRL70 SBCTRL(7, 0) -#define SBCTRL71 SBCTRL(7, 1) -#define SBCTRL72 SBCTRL(7, 2) -#define SBCTRL73 SBCTRL(7, 3) -#define SBCTRL74 (SBCTRL_BASE + 0x170) - -#define PC0CTRL 0x598000c0 - int uniphier_sbc_boot_is_swapped(void); -int uniphier_sbc_is_enabled(void); #endif /* ARCH_SBC_REGS_H */ diff --git a/arch/arm/mach-uniphier/sbc/sbc.c b/arch/arm/mach-uniphier/sbc/sbc.c deleted file mode 100644 index 519e67e367..0000000000 --- a/arch/arm/mach-uniphier/sbc/sbc.c +++ /dev/null @@ -1,70 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2011-2015 Panasonic Corporation - * Copyright (C) 2015-2017 Socionext Inc. - * Author: Masahiro Yamada - */ - -#include -#include - -#include "../init.h" -#include "sbc-regs.h" - -/* slower but LED works */ -#define SBCTRL0_SAVEPIN_PERI_VALUE 0x55450000 -#define SBCTRL1_SAVEPIN_PERI_VALUE 0x07168d00 -#define SBCTRL2_SAVEPIN_PERI_VALUE 0x34000009 -#define SBCTRL4_SAVEPIN_PERI_VALUE 0x02110110 - -/* faster but LED does not work */ -#define SBCTRL0_SAVEPIN_MEM_VALUE 0x55450000 -#define SBCTRL1_SAVEPIN_MEM_VALUE 0x06057700 -#define SBCTRL2_SAVEPIN_MEM_VALUE 0x34000009 -#define SBCTRL4_SAVEPIN_MEM_VALUE 0x02110210 - -int uniphier_sbc_is_enabled(void) -{ - DECLARE_GLOBAL_DATA_PTR; - const void *fdt = gd->fdt_blob; - int offset; - - offset = fdt_node_offset_by_compatible(fdt, 0, - "socionext,uniphier-system-bus"); - if (offset < 0) - return 0; - - return fdtdec_get_is_enabled(fdt, offset); -} - -void uniphier_sbc_init_savepin(void) -{ - /* - * Only CS1 is connected to support card. - * BKSZ[1:0] should be set to "01". - */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); - - if (uniphier_sbc_boot_is_swapped()) { - /* - * Boot Swap On: boot from external NOR/SRAM - * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. - * - * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank - * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals - */ - writel(0x0000bc01, SBBASE0); - } else { - /* - * Boot Swap Off: boot from mask ROM - * 0x40000000-0x41ffffff: mask ROM - * 0x42000000-0x43efffff: memory bank (31MB) - * 0x43f00000-0x43ffffff: peripherals (1MB) - */ - writel(0x0000be01, SBBASE0); /* dummy */ - writel(0x0200be01, SBBASE1); - } -} diff --git a/drivers/bus/uniphier-system-bus.c b/drivers/bus/uniphier-system-bus.c index c61d795bac..ea08d66a07 100644 --- a/drivers/bus/uniphier-system-bus.c +++ b/drivers/bus/uniphier-system-bus.c @@ -1,7 +1,92 @@ // SPDX-License-Identifier: GPL-2.0-or-later +#include +#include +#include +#include +#include #include +/* System Bus Controller registers */ +#define UNIPHIER_SBC_BASE 0x100 /* base address of bank0 space */ +#define UNIPHIER_SBC_BASE_BE BIT(0) /* bank_enable */ +#define UNIPHIER_SBC_CTRL0 0x200 /* timing parameter 0 of bank0 */ +#define UNIPHIER_SBC_CTRL1 0x204 /* timing parameter 1 of bank0 */ +#define UNIPHIER_SBC_CTRL2 0x208 /* timing parameter 2 of bank0 */ +#define UNIPHIER_SBC_CTRL3 0x20c /* timing parameter 3 of bank0 */ +#define UNIPHIER_SBC_CTRL4 0x300 /* timing parameter 4 of bank0 */ + +#define UNIPHIER_SBC_STRIDE 0x10 /* register stride to next bank */ + +#if 1 +/* slower but LED works */ +#define SBCTRL0_VALUE 0x55450000 +#define SBCTRL1_VALUE 0x07168d00 +#define SBCTRL2_VALUE 0x34000009 +#define SBCTRL4_VALUE 0x02110110 + +#else +/* faster but LED does not work */ +#define SBCTRL0_VALUE 0x55450000 +#define SBCTRL1_VALUE 0x06057700 +/* NOR flash needs more wait counts than SRAM */ +#define SBCTRL2_VALUE 0x34000009 +#define SBCTRL4_VALUE 0x02110210 +#endif + +void uniphier_system_bus_set_reg(void __iomem *membase) +{ + void __iomem *bank0_base = membase; + void __iomem *bank1_base = membase + UNIPHIER_SBC_STRIDE; + + /* + * Only CS1 is connected to support card. + * BKSZ[1:0] should be set to "01". + */ + writel(SBCTRL0_VALUE, bank1_base + UNIPHIER_SBC_CTRL0); + writel(SBCTRL1_VALUE, bank1_base + UNIPHIER_SBC_CTRL1); + writel(SBCTRL2_VALUE, bank1_base + UNIPHIER_SBC_CTRL2); + writel(SBCTRL4_VALUE, bank1_base + UNIPHIER_SBC_CTRL4); + + if (readl(bank1_base + UNIPHIER_SBC_BASE) & UNIPHIER_SBC_BASE_BE) { + /* + * Boot Swap On: boot from external NOR/SRAM + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. + * + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals + */ + writel(0x0000bc01, bank0_base + UNIPHIER_SBC_BASE); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) + */ + writel(0x0000be01, bank0_base + UNIPHIER_SBC_BASE); /* dummy */ + writel(0x0200be01, bank0_base + UNIPHIER_SBC_BASE); + } +} + +static int uniphier_system_bus_probe(struct udevice *dev) +{ + fdt_addr_t base; + void __iomem *membase; + + base = dev_read_addr(dev); + if (base == FDT_ADDR_T_NONE) + return -EINVAL; + + membase = devm_ioremap(dev, base, SZ_1K); + if (!membase) + return -ENOMEM; + + uniphier_system_bus_set_reg(membase); + + return 0; +} + static const struct udevice_id uniphier_system_bus_match[] = { { .compatible = "socionext,uniphier-system-bus" }, { /* sentinel */ } @@ -11,4 +96,5 @@ U_BOOT_DRIVER(uniphier_system_bus_driver) = { .name = "uniphier-system-bus", .id = UCLASS_SIMPLE_BUS, .of_match = uniphier_system_bus_match, + .probe = uniphier_system_bus_probe, };