From: Alex Marginean <alexandru.marginean@nxp.com>
Date: Mon, 25 Jan 2021 12:23:56 +0000 (+0200)
Subject: arm: dts: ls1028a: Add Ethernet switch node and dependencies
X-Git-Url: http://git.dujemihanovic.xyz/img/%7B%7B%20%24image.RelPermalink%20%7D%7D?a=commitdiff_plain;h=cc32fd911aa904454d4cec003d59845cf1cc1631;p=u-boot.git

arm: dts: ls1028a: Add Ethernet switch node and dependencies

The definition follows the DSA binding in kernel and describes the switch,
its ports and PHYs.  The switch node has the same structure as in Linux
and this patch enables it (and relevant ports) for the LS1028A RDB board.

ENETC PF6 is the 2nd Eth controller linked to the switch on LS1028A, it is
not used in U-Boot and was disabled.  Ethernet port aliases were also
added to better manage the multitude of ports available now.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Michael Walle <michael@walle.cc>
---

diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts
index 85b4815b2e..3432fca352 100644
--- a/arch/arm/dts/fsl-ls1028a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1028a-rdb.dts
@@ -15,6 +15,12 @@
 	compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
 	aliases {
 		spi0 = &fspi;
+		eth0 = &enetc0;
+		eth1 = &enetc2;
+		eth2 = &mscc_felix_port0;
+		eth3 = &mscc_felix_port1;
+		eth4 = &mscc_felix_port2;
+		eth5 = &mscc_felix_port3;
 	};
 };
 
@@ -131,9 +137,67 @@
 	phy-handle = <&rdb_phy0>;
 };
 
+&enetc2 {
+	status = "okay";
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "swp0";
+	phy-handle = <&sw_phy0>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "swp1";
+	phy-handle = <&sw_phy1>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port2 {
+	label = "swp2";
+	phy-handle = <&sw_phy2>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port3 {
+	label = "swp3";
+	phy-handle = <&sw_phy3>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
+
 &mdio0 {
 	status = "okay";
 	rdb_phy0: phy@2 {
 		reg = <2>;
 	};
+
+	/* VSC8514 QSGMII PHY */
+	sw_phy0: phy@10 {
+		reg = <0x10>;
+	};
+
+	sw_phy1: phy@11 {
+		reg = <0x11>;
+	};
+
+	sw_phy2: phy@12 {
+		reg = <0x12>;
+	};
+
+	sw_phy3: phy@13 {
+		reg = <0x13>;
+	};
 };
diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi
index 5171bf28c7..c7c725a4fc 100644
--- a/arch/arm/dts/fsl-ls1028a.dtsi
+++ b/arch/arm/dts/fsl-ls1028a.dtsi
@@ -151,9 +151,63 @@
 			reg = <0x000300 0 0 0 0>;
 			status = "disabled";
 		};
+
+		mscc_felix: pci@0,5 {
+			reg = <0x000500 0 0 0 0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mscc_felix_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				mscc_felix_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				mscc_felix_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				mscc_felix_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				mscc_felix_port4: port@4 {
+					reg = <4>;
+					phy-mode = "internal";
+					status = "disabled";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+					};
+				};
+
+				mscc_felix_port5: port@5 {
+					reg = <5>;
+					phy-mode = "internal";
+					status = "disabled";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+
+				};
+			};
+		};
+
 		enetc6: pci@0,6 {
 			reg = <0x000600 0 0 0 0>;
-			status = "okay";
+			status = "disabled";
 			phy-mode = "internal";
 		};
 	};