From: Quentin Schulz <quentin.schulz@cherry.de>
Date: Wed, 6 Nov 2024 11:29:42 +0000 (+0100)
Subject: rockchip: rk3399: merge CRU check within rk3399_force_power_on_reset
X-Git-Url: http://git.dujemihanovic.xyz/img/%7B%7B%20%24image.RelPermalink%20%7D%7D?a=commitdiff_plain;h=b21fd44c84fd5053a350de6138fb832839c04b67;p=u-boot.git

rockchip: rk3399: merge CRU check within rk3399_force_power_on_reset

To prepare to support forcing power on reset from TPL which would have
the exact same logic, just in an earlier stage, let's merge the CRU
check that triggers the power on reset with the rest of the logic.

Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---

diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c
index edccb2a398..7b6a822ed0 100644
--- a/arch/arm/mach-rockchip/rk3399/rk3399.c
+++ b/arch/arm/mach-rockchip/rk3399/rk3399.c
@@ -172,9 +172,29 @@ void board_debug_uart_init(void)
 #if defined(CONFIG_XPL_BUILD) && !defined(CONFIG_TPL_BUILD)
 static void rk3399_force_power_on_reset(void)
 {
+	const struct rockchip_cru *cru = rockchip_get_cru();
 	ofnode node;
 	struct gpio_desc sysreset_gpio;
 
+	/*
+	 * The RK3399 resets only 'almost all logic' (see also in the
+	 * TRM "3.9.4 Global software reset"), when issuing a software
+	 * reset. This may cause issues during boot-up for some
+	 * configurations of the application software stack.
+	 *
+	 * To work around this, we test whether the last reset reason
+	 * was a power-on reset and (if not) issue an overtemp-reset to
+	 * reset the entire module.
+	 *
+	 * While this was previously fixed by modifying the various
+	 * places that could generate a software reset (e.g. U-Boot's
+	 * sysreset driver, the ATF or Linux), we now have it here to
+	 * ensure that we no longer have to track this through the
+	 * various components.
+	 */
+	if (cru->glb_rst_st == 0)
+		return;
+
 	if (!IS_ENABLED(CONFIG_SPL_GPIO)) {
 		debug("%s: trying to force a power-on reset but no GPIO "
 		      "support in SPL!\n", __func__);
@@ -206,27 +226,6 @@ void spl_board_init(void)
 {
 	led_setup();
 
-	if (IS_ENABLED(CONFIG_SPL_GPIO)) {
-		struct rockchip_cru *cru = rockchip_get_cru();
-
-		/*
-		 * The RK3399 resets only 'almost all logic' (see also in the
-		 * TRM "3.9.4 Global software reset"), when issuing a software
-		 * reset. This may cause issues during boot-up for some
-		 * configurations of the application software stack.
-		 *
-		 * To work around this, we test whether the last reset reason
-		 * was a power-on reset and (if not) issue an overtemp-reset to
-		 * reset the entire module.
-		 *
-		 * While this was previously fixed by modifying the various
-		 * places that could generate a software reset (e.g. U-Boot's
-		 * sysreset driver, the ATF or Linux), we now have it here to
-		 * ensure that we no longer have to track this through the
-		 * various components.
-		 */
-		if (cru->glb_rst_st != 0)
-			rk3399_force_power_on_reset();
-	}
+	rk3399_force_power_on_reset();
 }
 #endif