From: Hanyuan Zhao <hanyuan-z@qq.com>
Date: Fri, 9 Aug 2024 08:56:58 +0000 (+0800)
Subject: net: dc2114x: remove unused lines and change the var and print types
X-Git-Url: http://git.dujemihanovic.xyz/img/%7B%7B%20%24image.RelPermalink%20%7D%7D?a=commitdiff_plain;h=8c18c53164be0d3793dcf8074bfeb06615335ac9;p=u-boot.git

net: dc2114x: remove unused lines and change the var and print types

This commit fixes a problem that even though the network card does not report
any issues in transmitting a setup frame, the driver prints the error status
every time. Let's set it for debug use.

Signed-off-by: Hanyuan Zhao <zhaohy22@mails.tsinghua.edu.cn>
---

diff --git a/drivers/net/dc2114x.c b/drivers/net/dc2114x.c
index 0b3000cc1d..8a285742a1 100644
--- a/drivers/net/dc2114x.c
+++ b/drivers/net/dc2114x.c
@@ -311,7 +311,7 @@ static void send_setup_frame(struct dc2114x_priv *priv)
 	}
 
 	priv->tx_ring[priv->tx_new].buf = cpu_to_le32(phys_to_bus(priv->devno,
-						      (u32)&setup_frame[0]));
+						      (phys_addr_t)&setup_frame[0]));
 	priv->tx_ring[priv->tx_new].des1 = cpu_to_le32(TD_TER | TD_SET | SETUP_FRAME_LEN);
 	priv->tx_ring[priv->tx_new].status = cpu_to_le32(T_OWN);
 
@@ -326,7 +326,7 @@ static void send_setup_frame(struct dc2114x_priv *priv)
 	}
 
 	if (le32_to_cpu(priv->tx_ring[priv->tx_new].status) != 0x7FFFFFFF) {
-		printf("TX error status2 = 0x%08X\n",
+		debug("TX error status2 = 0x%08X\n",
 		       le32_to_cpu(priv->tx_ring[priv->tx_new].status));
 	}
 
@@ -355,7 +355,7 @@ static int dc21x4x_send_common(struct dc2114x_priv *priv, void *packet, int leng
 	flush_dcache_range((phys_addr_t)packet, (phys_addr_t)(packet + RX_BUFF_SZ));
 
 	priv->tx_ring[priv->tx_new].buf = cpu_to_le32(phys_to_bus(priv->devno,
-						      (u32)packet));
+						      (phys_addr_t)packet));
 	priv->tx_ring[priv->tx_new].des1 = cpu_to_le32(TD_TER | TD_LS | TD_FS | length);
 	priv->tx_ring[priv->tx_new].status = cpu_to_le32(T_OWN);
 
@@ -426,7 +426,7 @@ static int dc21x4x_init_common(struct dc2114x_priv *priv)
 		priv->rx_ring[i].status = cpu_to_le32(R_OWN);
 		priv->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
 		priv->rx_ring[i].buf = cpu_to_le32(phys_to_bus(priv->devno,
-					     (u32)net_rx_packets[i]));
+					     (phys_addr_t)net_rx_packets[i]));
 		priv->rx_ring[i].next = 0;
 	}
 
@@ -445,9 +445,9 @@ static int dc21x4x_init_common(struct dc2114x_priv *priv)
 	priv->tx_ring[priv->tx_ring_size - 1].des1 |= cpu_to_le32(TD_TER);
 
 	/* Tell the adapter where the TX/RX rings are located. */
-	dc2114x_outl(priv, phys_to_bus(priv->devno, (u32)&priv->rx_ring),
+	dc2114x_outl(priv, phys_to_bus(priv->devno, (phys_addr_t)priv->rx_ring),
 		     DE4X5_RRBA);
-	dc2114x_outl(priv, phys_to_bus(priv->devno, (u32)&priv->tx_ring),
+	dc2114x_outl(priv, phys_to_bus(priv->devno, (phys_addr_t)priv->tx_ring),
 		     DE4X5_TRBA);
 
 	start_de4x5(priv);
@@ -493,7 +493,6 @@ static struct pci_device_id supported[] = {
 
 static int dc2114x_start(struct udevice *dev)
 {
-	struct eth_pdata *plat = dev_get_plat(dev);
 	struct dc2114x_priv *priv = dev_get_priv(dev);
 	int rval;