From: Caleb Connolly Date: Wed, 3 Apr 2024 12:07:42 +0000 (+0200) Subject: clk/qcom: sdm845: add USB clocks X-Git-Url: http://git.dujemihanovic.xyz/img/%7B%7B%20%24image.RelPermalink%20%7D%7D?a=commitdiff_plain;h=491a9815775487412b7cf628f7113f3f542d0b49;p=u-boot.git clk/qcom: sdm845: add USB clocks Most devices only initialise the USB clocks for us if we boot via "fastboot boot", add the missing clock configuration to get both USB ports working regardless of the bootloader state. Reviewed-by: Sumit Garg Signed-off-by: Caleb Connolly --- diff --git a/drivers/clk/qcom/clock-sdm845.c b/drivers/clk/qcom/clock-sdm845.c index b715436089..e9c61eb480 100644 --- a/drivers/clk/qcom/clock-sdm845.c +++ b/drivers/clk/qcom/clock-sdm845.c @@ -21,6 +21,10 @@ #define SE9_UART_APPS_CMD_RCGR 0x18148 +#define USB30_PRIM_MASTER_CLK_CMD_RCGR 0xf018 +#define USB30_PRIM_MOCK_UTMI_CLK_CMD_RCGR 0xf030 +#define USB3_PRIM_PHY_AUX_CMD_RCGR 0xf05c + static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = { F(7372800, CFG_CLK_SRC_GPLL0_EVEN, 1, 384, 15625), F(14745600, CFG_CLK_SRC_GPLL0_EVEN, 1, 768, 15625), @@ -57,6 +61,8 @@ static ulong sdm845_clk_set_rate(struct clk *clk, ulong rate) } static const struct gate_clk sdm845_clks[] = { + GATE_CLK(GCC_AGGRE_USB3_SEC_AXI_CLK, 0x82020, 0x00000001), + GATE_CLK(GCC_CFG_NOC_USB3_SEC_AXI_CLK, 0x05030, 0x00000001), GATE_CLK(GCC_QUPV3_WRAP0_S0_CLK, 0x5200c, 0x00000400), GATE_CLK(GCC_QUPV3_WRAP0_S1_CLK, 0x5200c, 0x00000800), GATE_CLK(GCC_QUPV3_WRAP0_S2_CLK, 0x5200c, 0x00001000), @@ -121,6 +127,25 @@ static int sdm845_clk_enable(struct clk *clk) debug("%s: clk %s\n", __func__, sdm845_clks[clk->id].name); + switch (clk->id) { + case GCC_USB30_PRIM_MASTER_CLK: + qcom_gate_clk_en(priv, GCC_USB_PHY_CFG_AHB2PHY_CLK); + /* These numbers are just pulled from the frequency tables in the Linux driver */ + clk_rcg_set_rate_mnd(priv->base, USB30_PRIM_MASTER_CLK_CMD_RCGR, + (4.5 * 2) - 1, 0, 0, 1 << 8, 8); + clk_rcg_set_rate_mnd(priv->base, USB30_PRIM_MOCK_UTMI_CLK_CMD_RCGR, + 1, 0, 0, 0, 8); + clk_rcg_set_rate_mnd(priv->base, USB3_PRIM_PHY_AUX_CMD_RCGR, + 1, 0, 0, 0, 8); + break; + case GCC_USB30_SEC_MASTER_CLK: + qcom_gate_clk_en(priv, GCC_USB3_SEC_PHY_AUX_CLK); + + qcom_gate_clk_en(priv, GCC_USB3_SEC_CLKREF_CLK); + qcom_gate_clk_en(priv, GCC_USB3_SEC_PHY_COM_AUX_CLK); + break; + } + qcom_gate_clk_en(priv, clk->id); return 0;