From: Tom Rini <trini@konsulko.com>
Date: Sat, 25 Jun 2022 15:02:37 +0000 (-0400)
Subject: Convert CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS et al to Kconfig
X-Git-Url: http://git.dujemihanovic.xyz/img/%7B%7B%20%24image.RelPermalink%20%7D%7D?a=commitdiff_plain;h=2bb9d7c65ae54e6cd1ed2c5fb109de6d697f429f;p=u-boot.git

Convert CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS et al to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
   CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
   CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS

Signed-off-by: Tom Rini <trini@konsulko.com>
---

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 51d1db4a87..fa41047476 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -169,6 +169,27 @@ config TI_SECURE_EMIF_PROTECTED_REGION_SIZE
 	  using hardware memory firewalls. This value must be smaller than the
 	  TI_SECURE_EMIF_TOTAL_REGION_SIZE value.
 
+config SYS_AUTOMATIC_SDRAM_DETECTION
+	bool
+
+choice
+	depends on OMAP44XX || OMAP54XX
+	prompt "Static or dynamic DDR timing calculations"
+	default SYS_EMIF_PRECALCULATED_TIMING_REGS
+	help
+	  For the DDR timing information we can either dynamically determine
+	  the timings to use or use pre-determined timings (based on using the
+	  dynamic method).  Default to the static timing information.
+
+config SYS_EMIF_PRECALCULATED_TIMING_REGS
+	bool "Use precalcualted timing values"
+
+config SYS_DEFAULT_LPDDR2_TIMINGS
+	bool "Use default LPDDR2 timing values"
+	select SYS_AUTOMATIC_SDRAM_DETECTION
+
+endchoice
+
 source "arch/arm/mach-omap2/omap3/Kconfig"
 
 source "arch/arm/mach-omap2/omap4/Kconfig"
diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index fcf282bc4c..3d78972bfe 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -23,17 +23,6 @@
 /* Use General purpose timer 1 */
 #define CONFIG_SYS_TIMERBASE		GPT2_BASE
 
-/*
- * For the DDR timing information we can either dynamically determine
- * the timings to use or use pre-determined timings (based on using the
- * dynamic method.  Default to the static timing infomation.
- */
-#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-#endif
-
 #include <configs/ti_armv7_omap.h>
 
 /*
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index f7f17d0f50..a9d4cf905f 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -19,17 +19,6 @@
 /* Use General purpose timer 1 */
 #define CONFIG_SYS_TIMERBASE		GPT2_BASE
 
-/*
- * For the DDR timing information we can either dynamically determine
- * the timings to use or use pre-determined timings (based on using the
- * dynamic method.  Default to the static timing infomation.
- */
-#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-#endif
-
 #define CONFIG_PALMAS_POWER
 
 #include <linux/stringify.h>