From: Peng Fan Date: Thu, 28 Mar 2024 02:45:11 +0000 (+0800) Subject: imx: imx8mp_evk: convert to OF_UPSTREAM X-Git-Url: http://git.dujemihanovic.xyz/img/%7B%7B%20%24image.RelPermalink%20%7D%7D?a=commitdiff_plain;h=131d895f929fe5f7bbabdde1da1de816f9fbff07;p=u-boot.git imx: imx8mp_evk: convert to OF_UPSTREAM Convert to OF_UPSTREAM for i.MX8MP EVK Signed-off-by: Peng Fan --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 56623d0124..7b7788f755 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1101,7 +1101,6 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mp-dhcom-pdk2.dtb \ imx8mp-dhcom-pdk3.dtb \ imx8mp-dhcom-pdk3-overlay-rev100.dtbo \ - imx8mp-evk.dtb \ imx8mp-icore-mx8mp-edimm2.2.dtb \ imx8mp-msc-sm2s.dtb \ imx8mp-phyboard-pollux-rdk.dtb \ diff --git a/arch/arm/dts/imx8mp-evk.dts b/arch/arm/dts/imx8mp-evk.dts deleted file mode 100644 index 9f1469db55..0000000000 --- a/arch/arm/dts/imx8mp-evk.dts +++ /dev/null @@ -1,684 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2019 NXP - */ - -/dts-v1/; - -#include -#include "imx8mp.dtsi" - -/ { - model = "NXP i.MX8MPlus EVK board"; - compatible = "fsl,imx8mp-evk", "fsl,imx8mp"; - - chosen { - stdout-path = &uart2; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_led>; - - status { - label = "yellow:status"; - gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0x0 0x40000000 0 0xc0000000>, - <0x1 0x00000000 0 0xc0000000>; - }; - - pcie0_refclk: pcie0-refclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - - reg_can1_stby: regulator-can1-stby { - compatible = "regulator-fixed"; - regulator-name = "can1-stby"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1_reg>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_can2_stby: regulator-can2-stby { - compatible = "regulator-fixed"; - regulator-name = "can2-stby"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2_reg>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_pcie0: regulator-pcie { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pcie0_reg>; - regulator-name = "MPCIE_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usdhc2_vmmc: regulator-usdhc2 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; - regulator-name = "VSD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&A53_0 { - cpu-supply = <®_arm>; -}; - -&A53_1 { - cpu-supply = <®_arm>; -}; - -&A53_2 { - cpu-supply = <®_arm>; -}; - -&A53_3 { - cpu-supply = <®_arm>; -}; - -&eqos { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eqos>; - phy-mode = "rgmii-id"; - phy-handle = <ðphy0>; - snps,force_thresh_dma_mode; - snps,mtl-tx-config = <&mtl_tx_setup>; - snps,mtl-rx-config = <&mtl_rx_setup>; - status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - eee-broken-1000t; - reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <80000>; - realtek,clkout-disable; - }; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <5>; - snps,tx-sched-sp; - - queue0 { - snps,dcb-algorithm; - snps,priority = <0x1>; - }; - - queue1 { - snps,dcb-algorithm; - snps,priority = <0x2>; - }; - - queue2 { - snps,dcb-algorithm; - snps,priority = <0x4>; - }; - - queue3 { - snps,dcb-algorithm; - snps,priority = <0x8>; - }; - - queue4 { - snps,dcb-algorithm; - snps,priority = <0xf0>; - }; - }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <5>; - snps,rx-sched-sp; - - queue0 { - snps,dcb-algorithm; - snps,priority = <0x1>; - snps,map-to-dma-channel = <0>; - }; - - queue1 { - snps,dcb-algorithm; - snps,priority = <0x2>; - snps,map-to-dma-channel = <1>; - }; - - queue2 { - snps,dcb-algorithm; - snps,priority = <0x4>; - snps,map-to-dma-channel = <2>; - }; - - queue3 { - snps,dcb-algorithm; - snps,priority = <0x8>; - snps,map-to-dma-channel = <3>; - }; - - queue4 { - snps,dcb-algorithm; - snps,priority = <0xf0>; - snps,map-to-dma-channel = <4>; - }; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec>; - phy-mode = "rgmii-id"; - phy-handle = <ðphy1>; - fsl,magic-packet; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - eee-broken-1000t; - reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <80000>; - realtek,clkout-disable; - }; - }; -}; - -&flexcan1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; - xceiver-supply = <®_can1_stby>; - status = "okay"; -}; - -&flexcan2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - xceiver-supply = <®_can2_stby>; - status = "disabled";/* can2 pin conflict with pdm */ -}; - -&i2c1 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - pmic@25 { - compatible = "nxp,pca9450c"; - reg = <0x25>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pmic>; - interrupt-parent = <&gpio1>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - - regulators { - BUCK1 { - regulator-name = "BUCK1"; - regulator-min-microvolt = <720000>; - regulator-max-microvolt = <1000000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <3125>; - }; - - reg_arm: BUCK2 { - regulator-name = "BUCK2"; - regulator-min-microvolt = <720000>; - regulator-max-microvolt = <1025000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <3125>; - nxp,dvs-run-voltage = <950000>; - nxp,dvs-standby-voltage = <850000>; - }; - - BUCK4 { - regulator-name = "BUCK4"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3600000>; - regulator-boot-on; - regulator-always-on; - }; - - BUCK5 { - regulator-name = "BUCK5"; - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <1950000>; - regulator-boot-on; - regulator-always-on; - }; - - BUCK6 { - regulator-name = "BUCK6"; - regulator-min-microvolt = <1045000>; - regulator-max-microvolt = <1155000>; - regulator-boot-on; - regulator-always-on; - }; - - LDO1 { - regulator-name = "LDO1"; - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <1950000>; - regulator-boot-on; - regulator-always-on; - }; - - LDO3 { - regulator-name = "LDO3"; - regulator-min-microvolt = <1710000>; - regulator-max-microvolt = <1890000>; - regulator-boot-on; - regulator-always-on; - }; - - LDO5 { - regulator-name = "LDO5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; -}; - -&i2c3 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - status = "okay"; - - pca6416: gpio@20 { - compatible = "ti,tca6416"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pca6416_int>; - interrupt-parent = <&gpio1>; - interrupts = <12 IRQ_TYPE_LEVEL_LOW>; - gpio-line-names = "EXT_PWREN1", - "EXT_PWREN2", - "CAN1/I2C5_SEL", - "PDM/CAN2_SEL", - "FAN_EN", - "PWR_MEAS_IO1", - "PWR_MEAS_IO2", - "EXP_P0_7", - "EXP_P1_0", - "EXP_P1_1", - "EXP_P1_2", - "EXP_P1_3", - "EXP_P1_4", - "EXP_P1_5", - "EXP_P1_6", - "EXP_P1_7"; - }; -}; - -/* I2C on expansion connector J22. */ -&i2c5 { - clock-frequency = <100000>; /* Lower clock speed for external bus. */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c5>; - status = "disabled"; /* can1 pins conflict with i2c5 */ - - /* GPIO 2 of PCA6416 is used to switch between CAN1 and I2C5 functions: - * LOW: CAN1 (default, pull-down) - * HIGH: I2C5 - * You need to set it to high to enable I2C5 (for example, add gpio-hog - * in pca6416 node). - */ -}; - -&pcie_phy { - fsl,refclk-pad-mode = ; - clocks = <&pcie0_refclk>; - clock-names = "ref"; - status = "okay"; -}; - -&pcie { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pcie0>; - reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>; - clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, - <&clk IMX8MP_CLK_PCIE_ROOT>, - <&clk IMX8MP_CLK_HSIO_AXI>; - clock-names = "pcie", "pcie_aux", "pcie_bus"; - assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; - assigned-clock-rates = <10000000>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; - vpcie-supply = <®_pcie0>; - status = "okay"; -}; - -&snvs_pwrkey { - status = "okay"; -}; - -&uart2 { - /* console */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usb3_phy1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&usb_dwc3_1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb1_vbus>; - dr_mode = "host"; - status = "okay"; -}; - -&usdhc2 { - assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; - assigned-clock-rates = <400000000>; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_usdhc2_vmmc>; - bus-width = <4>; - status = "okay"; -}; - -&usdhc3 { - assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; - assigned-clock-rates = <400000000>; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - -&iomuxc { - pinctrl_eqos: eqosgrp { - fsl,pins = < - MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 - MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2 - MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90 - MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90 - MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90 - MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90 - MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90 - MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90 - MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16 - MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16 - MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 - MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 - MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 - MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 - MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x10 - >; - }; - - pinctrl_fec: fecgrp { - fsl,pins = < - MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x2 - MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x2 - MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90 - MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90 - MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90 - MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90 - MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90 - MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90 - MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x16 - MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x16 - MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x16 - MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x16 - MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x16 - MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x16 - MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x10 - >; - }; - - pinctrl_flexcan1: flexcan1grp { - fsl,pins = < - MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 - MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 - >; - }; - - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154 - MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154 - >; - }; - - pinctrl_flexcan1_reg: flexcan1reggrp { - fsl,pins = < - MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x154 /* CAN1_STBY */ - >; - }; - - pinctrl_flexcan2_reg: flexcan2reggrp { - fsl,pins = < - MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x154 /* CAN2_STBY */ - >; - }; - - pinctrl_gpio_led: gpioledgrp { - fsl,pins = < - MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x140 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 - MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 - MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 - >; - }; - - pinctrl_i2c5: i2c5grp { - fsl,pins = < - MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001c2 - MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c2 - >; - }; - - pinctrl_pcie0: pcie0grp { - fsl,pins = < - MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B 0x61 /* open drain, pull up */ - MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x41 - >; - }; - - pinctrl_pcie0_reg: pcie0reggrp { - fsl,pins = < - MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x41 - >; - }; - - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x000001c0 - >; - }; - - pinctrl_pca6416_int: pca6416_int_grp { - fsl,pins = < - MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x146 /* Input pull-up. */ - >; - }; - - pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { - fsl,pins = < - MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 - MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 - >; - }; - - pinctrl_usb1_vbus: usb1grp { - fsl,pins = < - MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x10 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 - MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 - MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 - MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 - MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 - MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 - MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { - fsl,pins = < - MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 - MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 - MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 - MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 - MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 - MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 - MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { - fsl,pins = < - MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 - MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 - MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 - MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 - MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 - MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 - MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 - >; - }; - - pinctrl_usdhc2_gpio: usdhc2gpiogrp { - fsl,pins = < - MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 - MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 - MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 - MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 - MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 - MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 - MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 - MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 - MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 - MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 - MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 - >; - }; - - pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { - fsl,pins = < - MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 - MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 - MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 - MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 - MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 - MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 - MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 - MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 - MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 - MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 - MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { - fsl,pins = < - MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 - MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 - MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 - MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 - MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 - MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 - MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 - MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 - MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 - MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 - MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166 - >; - }; -}; diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index cb8afce241..fbde476a7f 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -222,6 +222,7 @@ config TARGET_IMX8MP_EVK select FSL_CAAM select ARCH_MISC_INIT select SPL_CRYPTO if SPL + imply OF_UPSTREAM config TARGET_IMX8MP_VENICE bool "Support Gateworks Venice iMX8M Plus module" diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig index 2846faa835..7e5dfce2ab 100644 --- a/configs/imx8mp_evk_defconfig +++ b/configs/imx8mp_evk_defconfig @@ -8,7 +8,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x400000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="imx8mp-evk" +CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-evk" CONFIG_SPL_TEXT_BASE=0x920000 CONFIG_TARGET_IMX8MP_EVK=y CONFIG_SYS_MONITOR_LEN=524288