From: Aditya Prayoga <aditya@kobol.io>
Date: Tue, 4 Dec 2018 16:39:23 +0000 (+0800)
Subject: net: mvneta: Add GPIO configuration support
X-Git-Tag: v2025.01-rc5-pxa1908~3159^2~6
X-Git-Url: http://git.dujemihanovic.xyz/img/%22http:/www.sics.se/static/git-logo.png?a=commitdiff_plain;h=18bfc8fa84cd6d748c134b6265786f7d8226f86c;p=u-boot.git

net: mvneta: Add GPIO configuration support

This patch add GPIO configuration support in mvneta driver.
Driver will handle PHY reset. GPIO pins should be set in device tree.

Ported from mvpp2x
[https://patchwork.ozlabs.org/patch/799654/]

Initial discussion to port the changes into mvneta
[https://patchwork.ozlabs.org/patch/1005765/]

Signed-off-by: Aditya Prayoga <aditya@kobol.io>
Tested-by: Dennis Gilmore <dgilmore@redhat.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
---

diff --git a/drivers/net/mvneta.c b/drivers/net/mvneta.c
index 8cb04b52d7..333be8ff28 100644
--- a/drivers/net/mvneta.c
+++ b/drivers/net/mvneta.c
@@ -27,6 +27,7 @@
 #include <asm/arch/soc.h>
 #include <linux/compat.h>
 #include <linux/mbus.h>
+#include <asm-generic/gpio.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -274,6 +275,9 @@ struct mvneta_port {
 	int init;
 	int phyaddr;
 	struct phy_device *phydev;
+#ifdef CONFIG_DM_GPIO
+	struct gpio_desc phy_reset_gpio;
+#endif
 	struct mii_dev *bus;
 };
 
@@ -1749,6 +1753,17 @@ static int mvneta_probe(struct udevice *dev)
 	if (ret)
 		return ret;
 
+#ifdef CONFIG_DM_GPIO
+	gpio_request_by_name(dev, "phy-reset-gpios", 0,
+			     &pp->phy_reset_gpio, GPIOD_IS_OUT);
+
+	if (dm_gpio_is_valid(&pp->phy_reset_gpio)) {
+		dm_gpio_set_value(&pp->phy_reset_gpio, 1);
+		mdelay(10);
+		dm_gpio_set_value(&pp->phy_reset_gpio, 0);
+	}
+#endif
+
 	return board_network_enable(bus);
 }