From: Alexey Romanov <avromanov@salutedevices.com>
Date: Thu, 18 Apr 2024 10:01:29 +0000 (+0300)
Subject: fastboot: introduce 'oem board' subcommand
X-Git-Tag: v2025.01-rc5-pxa1908~523^2
X-Git-Url: http://git.dujemihanovic.xyz/img/%22http:/www.sics.se/static/git-favicon.png?a=commitdiff_plain;h=b2acf59baf917c3b4002c1b2094ddb46c03ab02e;p=u-boot.git

fastboot: introduce 'oem board' subcommand

Currently, fastboot protocol in U-Boot has no opportunity
to execute vendor custom code with verifed boot. This patch
introduce new fastboot subcommand fastboot oem board:<cmd>,
which allow to run custom oem_board function.

Default implementation is __weak. Vendor must redefine it in
board/ folder with his own logic.

For example, some vendors have their custom nand/emmc partition
flashing or erasing. Here some typical command for such use cases:

- flashing:

  $ fastboot stage bootloader.img
  $ fastboot oem board:write_bootloader

- erasing:

  $ fastboot oem board:erase_env

Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
---

diff --git a/doc/android/fastboot.rst b/doc/android/fastboot.rst
index 9e337cae2c..1a60968bb1 100644
--- a/doc/android/fastboot.rst
+++ b/doc/android/fastboot.rst
@@ -30,6 +30,7 @@ The following OEM commands are supported (if enabled):
 - ``oem bootbus``  - this executes ``mmc bootbus %x %s`` to configure eMMC
 - ``oem run`` - this executes an arbitrary U-Boot command
 - ``oem console`` - this dumps U-Boot console record buffer
+- ``oem board`` - this executes a custom board function which is defined by the vendor
 
 Support for both eMMC and NAND devices is included.
 
@@ -247,6 +248,23 @@ including multiple commands (using e.g. ``;`` or ``&&``) and control structures
 (``if``, ``while``, etc.). The exit code of ``fastboot`` will reflect the exit
 code of the command you ran.
 
+Running Custom Vendor Code
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+U-Boot allows you to execute custom fastboot logic, which can be defined
+in board/ files. It can still be used for production devices with verified
+boot, because the vendor defines logic at compile time by implementing
+fastboot_oem_board() function. The attacker will not be able to execute
+custom commands / code. For example, this can be useful for custom flashing
+or erasing protocols::
+
+    $ fastboot stage bootloader.img
+    $ fastboot oem board:write_bootloader
+
+In this case, ``cmd_parameter`` argument of the function ``fastboot_oem_board()``
+will contain string "write_bootloader" and ``data`` argument is a pointer to
+fastboot input buffer, which contains the contents of bootloader.img file.
+
 References
 ----------
 
diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig
index d6e2be09cf..0773248865 100644
--- a/drivers/fastboot/Kconfig
+++ b/drivers/fastboot/Kconfig
@@ -252,6 +252,13 @@ config FASTBOOT_CMD_OEM_CONSOLE
 	  Add support for the "oem console" command to input and read console
 	  record buffer.
 
+config FASTBOOT_OEM_BOARD
+	bool "Enable the 'oem board' command"
+	help
+	  This extends the fastboot protocol with an "oem board" command. This
+	  command allows running vendor custom code defined in board/ files.
+	  Otherwise, it will do nothing and send fastboot fail.
+
 endif # FASTBOOT
 
 endmenu
diff --git a/drivers/fastboot/fb_command.c b/drivers/fastboot/fb_command.c
index b8782bfa7f..e6d5848581 100644
--- a/drivers/fastboot/fb_command.c
+++ b/drivers/fastboot/fb_command.c
@@ -43,6 +43,7 @@ static void oem_format(char *, char *);
 static void oem_partconf(char *, char *);
 static void oem_bootbus(char *, char *);
 static void oem_console(char *, char *);
+static void oem_board(char *, char *);
 static void run_ucmd(char *, char *);
 static void run_acmd(char *, char *);
 
@@ -114,6 +115,10 @@ static const struct {
 		.command = "oem console",
 		.dispatch = CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_CONSOLE, (oem_console), (NULL))
 	},
+	[FASTBOOT_COMMAND_OEM_BOARD] = {
+		.command = "oem board",
+		.dispatch = CONFIG_IS_ENABLED(FASTBOOT_OEM_BOARD, (oem_board), (NULL))
+	},
 	[FASTBOOT_COMMAND_UCMD] = {
 		.command = "UCmd",
 		.dispatch = CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT, (run_ucmd), (NULL))
@@ -549,3 +554,28 @@ static void __maybe_unused oem_console(char *cmd_parameter, char *response)
 	else
 		fastboot_response(FASTBOOT_MULTIRESPONSE_START, response, NULL);
 }
+
+/**
+ * fastboot_oem_board() - Execute the OEM board command. This is default
+ * weak implementation, which may be overwritten in board/ files.
+ *
+ * @cmd_parameter: Pointer to command parameter
+ * @data: Pointer to fastboot input buffer
+ * @size: Size of the fastboot input buffer
+ * @response: Pointer to fastboot response buffer
+ */
+void __weak fastboot_oem_board(char *cmd_parameter, void *data, u32 size, char *response)
+{
+	fastboot_fail("oem board function not defined", response);
+}
+
+/**
+ * oem_board() - Execute the OEM board command
+ *
+ * @cmd_parameter: Pointer to command parameter
+ * @response: Pointer to fastboot response buffer
+ */
+static void __maybe_unused oem_board(char *cmd_parameter, char *response)
+{
+	fastboot_oem_board(cmd_parameter, (void *)fastboot_buf_addr, image_size, response);
+}
diff --git a/include/fastboot.h b/include/fastboot.h
index c75184cc91..626221b819 100644
--- a/include/fastboot.h
+++ b/include/fastboot.h
@@ -48,6 +48,7 @@ enum {
 	FASTBOOT_COMMAND_OEM_BOOTBUS,
 	FASTBOOT_COMMAND_OEM_RUN,
 	FASTBOOT_COMMAND_OEM_CONSOLE,
+	FASTBOOT_COMMAND_OEM_BOARD,
 	FASTBOOT_COMMAND_ACMD,
 	FASTBOOT_COMMAND_UCMD,
 	FASTBOOT_COMMAND_COUNT