From: Usama Arif <usama.arif@arm.com>
Date: Tue, 19 Oct 2021 14:49:48 +0000 (+0100)
Subject: mmc: arm_pl180_mmci: Enable HWFC for specific versions of MCI
X-Git-Url: http://git.dujemihanovic.xyz/html/static/gitweb.css?a=commitdiff_plain;h=c95b0297e95613fc68b1d92118ee64720d142f8c;p=u-boot.git

mmc: arm_pl180_mmci: Enable HWFC for specific versions of MCI

There are 4 registers (PERIPHID{0-3}) that contain the ID of MCI.
For MMCs' with peripheral id 0x02041180 and 0x03041180, H/W flow control
needs to be enabled for multi block writes (MMC CMD 18).

Signed-off-by: Usama Arif <usama.arif@arm.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
---

diff --git a/drivers/mmc/arm_pl180_mmci.c b/drivers/mmc/arm_pl180_mmci.c
index f99b5f997e..9c5d48e90c 100644
--- a/drivers/mmc/arm_pl180_mmci.c
+++ b/drivers/mmc/arm_pl180_mmci.c
@@ -282,6 +282,14 @@ static int host_request(struct mmc *dev,
 	return result;
 }
 
+static int check_peripheral_id(struct pl180_mmc_host *host, u32 periph_id)
+{
+	return readl(&host->base->periph_id0) == (periph_id & 0xFF) &&
+		readl(&host->base->periph_id1) == ((periph_id >> 8) & 0xFF)  &&
+		readl(&host->base->periph_id2) == ((periph_id >> 16) & 0xFF) &&
+		readl(&host->base->periph_id3) == ((periph_id >> 24) & 0xFF);
+}
+
 static int  host_set_ios(struct mmc *dev)
 {
 	struct pl180_mmc_host *host = dev->priv;
@@ -337,6 +345,12 @@ static int  host_set_ios(struct mmc *dev)
 		sdi_clkcr &= ~(SDI_CLKCR_WIDBUS_MASK);
 		sdi_clkcr |= buswidth;
 	}
+	/* For MMCs' with peripheral id 0x02041180 and 0x03041180, H/W flow control
+	 * needs to be enabled for multi block writes (MMC CMD 18).
+	 */
+	if (check_peripheral_id(host, 0x02041180) ||
+		check_peripheral_id(host, 0x03041180))
+		sdi_clkcr |= SDI_CLKCR_HWFCEN;
 
 	writel(sdi_clkcr, &host->base->clock);
 	udelay(CLK_CHANGE_DELAY);
diff --git a/drivers/mmc/arm_pl180_mmci.h b/drivers/mmc/arm_pl180_mmci.h
index 15c29beadb..fca15910a8 100644
--- a/drivers/mmc/arm_pl180_mmci.h
+++ b/drivers/mmc/arm_pl180_mmci.h
@@ -43,6 +43,7 @@
 #define SDI_CLKCR_CLKEN		0x00000100
 #define SDI_CLKCR_PWRSAV	0x00000200
 #define SDI_CLKCR_BYPASS	0x00000400
+#define SDI_CLKCR_HWFCEN	0x00001000
 #define SDI_CLKCR_WIDBUS_MASK	0x00001800
 #define SDI_CLKCR_WIDBUS_1	0x00000000
 #define SDI_CLKCR_WIDBUS_4	0x00000800