From: Tom Rini Date: Mon, 15 Jul 2024 19:35:55 +0000 (-0600) Subject: arm: Remove omap3_beagle board X-Git-Url: http://git.dujemihanovic.xyz/html/static/gitweb.css?a=commitdiff_plain;h=c5de07144af2747a0951423c8a34e350ae8dc045;p=u-boot.git arm: Remove omap3_beagle board This board has not been converted to CONFIG_DM_I2C by the deadline. Remove it. Acked-by: Robert Nelson Signed-off-by: Tom Rini --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index f950a403d0..3ae4110d60 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1006,11 +1006,6 @@ dtb-$(CONFIG_TARGET_OMAP3_EVM) += \ omap3-evm-37xx.dtb \ omap3-evm.dtb -dtb-$(CONFIG_TARGET_OMAP3_BEAGLE) += \ - omap3-beagle-xm-ab.dtb \ - omap3-beagle-xm.dtb \ - omap3-beagle.dtb - dtb-$(CONFIG_TARGET_DEVKIT8000) += omap3-devkit8000.dtb dtb-$(CONFIG_TARGET_SAMA7G5EK) += \ diff --git a/arch/arm/dts/omap3-beagle-u-boot.dtsi b/arch/arm/dts/omap3-beagle-u-boot.dtsi deleted file mode 100644 index 2c03701c89..0000000000 --- a/arch/arm/dts/omap3-beagle-u-boot.dtsi +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * U-Boot additions - * - * (C) Copyright 2017 Derald D. Woods - */ - -#include "omap3-u-boot.dtsi" - -/ { - chosen { - stdout-path = &uart3; - }; -}; diff --git a/arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi b/arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi deleted file mode 100644 index 2c03701c89..0000000000 --- a/arch/arm/dts/omap3-beagle-xm-ab-u-boot.dtsi +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * U-Boot additions - * - * (C) Copyright 2017 Derald D. Woods - */ - -#include "omap3-u-boot.dtsi" - -/ { - chosen { - stdout-path = &uart3; - }; -}; diff --git a/arch/arm/dts/omap3-beagle-xm-ab.dts b/arch/arm/dts/omap3-beagle-xm-ab.dts deleted file mode 100644 index cb6968a8bc..0000000000 --- a/arch/arm/dts/omap3-beagle-xm-ab.dts +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ - */ - -#include "omap3-beagle-xm.dts" - -/ { - /* HS USB Port 2 Power enable was inverted with the xM C */ - hsusb2_power: hsusb2_power_reg { - enable-active-high; - }; -}; diff --git a/arch/arm/dts/omap3-beagle-xm-u-boot.dtsi b/arch/arm/dts/omap3-beagle-xm-u-boot.dtsi deleted file mode 100644 index 2c03701c89..0000000000 --- a/arch/arm/dts/omap3-beagle-xm-u-boot.dtsi +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * U-Boot additions - * - * (C) Copyright 2017 Derald D. Woods - */ - -#include "omap3-u-boot.dtsi" - -/ { - chosen { - stdout-path = &uart3; - }; -}; diff --git a/arch/arm/dts/omap3-beagle-xm.dts b/arch/arm/dts/omap3-beagle-xm.dts deleted file mode 100644 index 73152f6fa8..0000000000 --- a/arch/arm/dts/omap3-beagle-xm.dts +++ /dev/null @@ -1,406 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ - */ -/dts-v1/; - -#include "omap36xx.dtsi" - -/ { - model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3"; - - cpus { - cpu@0 { - cpu0-supply = <&vcc>; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x20000000>; /* 512 MB */ - }; - - aliases { - display0 = &dvi0; - display1 = &tv0; - ethernet = ðernet; - }; - - led-controller-1 { - compatible = "gpio-leds"; - - led-1 { - label = "beagleboard::usr0"; - gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */ - linux,default-trigger = "heartbeat"; - }; - - led-2 { - label = "beagleboard::usr1"; - gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */ - linux,default-trigger = "mmc0"; - }; - }; - - led-controller-2 { - compatible = "pwm-leds"; - - led-3 { - label = "beagleboard::pmu_stat"; - pwms = <&twl_pwmled 1 7812500>; - max-brightness = <127>; - }; - }; - - sound { - compatible = "ti,omap-twl4030"; - ti,model = "omap3beagle"; - - ti,mcbsp = <&mcbsp2>; - }; - - gpio_keys { - compatible = "gpio-keys"; - - user { - label = "user"; - gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - linux,code = <0x114>; - wakeup-source; - }; - - }; - - /* HS USB Port 2 Power */ - hsusb2_power: hsusb2_power_reg { - compatible = "regulator-fixed"; - regulator-name = "hsusb2_vbus"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */ - startup-delay-us = <70000>; - }; - - /* HS USB Host PHY on PORT 2 */ - hsusb2_phy: hsusb2_phy { - compatible = "usb-nop-xceiv"; - reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ - vcc-supply = <&hsusb2_power>; - #phy-cells = <0>; - }; - - tfp410: encoder0 { - compatible = "ti,tfp410"; - powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; - - /* XXX pinctrl from twl */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tfp410_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - tfp410_out: endpoint { - remote-endpoint = <&dvi_connector_in>; - }; - }; - }; - }; - - dvi0: connector0 { - compatible = "dvi-connector"; - label = "dvi"; - - digital; - - ddc-i2c-bus = <&i2c3>; - - port { - dvi_connector_in: endpoint { - remote-endpoint = <&tfp410_out>; - }; - }; - }; - - tv0: connector1 { - compatible = "svideo-connector"; - label = "tv"; - - port { - tv_connector_in: endpoint { - remote-endpoint = <&venc_out>; - }; - }; - }; - - etb@5401b000 { - compatible = "arm,coresight-etb10", "arm,primecell"; - reg = <0x5401b000 0x1000>; - - clocks = <&emu_src_ck>; - clock-names = "apb_pclk"; - port { - etb_in: endpoint { - slave-mode; - remote-endpoint = <&etm_out>; - }; - }; - }; - - etm@54010000 { - compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0x54010000 0x1000>; - - clocks = <&emu_src_ck>; - clock-names = "apb_pclk"; - port { - etm_out: endpoint { - remote-endpoint = <&etb_in>; - }; - }; - }; -}; - -&omap3_pmx_wkup { - gpio1_pins: pinmux_gpio1_pins { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */ - >; - }; - - dss_dpi_pins2: pinmux_dss_dpi_pins1 { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ - OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ - OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ - OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ - OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ - OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ - >; - }; -}; - -&omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = < - &hsusb2_pins - >; - - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ - >; - }; - - hsusb2_pins: pinmux_hsusb2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ - OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ - OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ - OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ - OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ - OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ - >; - }; - - dss_dpi_pins1: pinmux_dss_dpi_pins2 { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ - OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ - OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ - OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ - - OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ - OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ - OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ - OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ - OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ - OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ - OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ - OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ - OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ - OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ - OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ - OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ - - OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */ - OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */ - OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */ - OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */ - OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */ - OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */ - >; - }; -}; - -&omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = < - &hsusb2_2_pins - >; - - hsusb2_2_pins: pinmux_hsusb2_2_pins { - pinctrl-single,pins = < - OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ - OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ - OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ - OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ - OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ - OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ - >; - }; -}; - -&i2c1 { - clock-frequency = <2600000>; - - twl: twl@48 { - reg = <0x48>; - interrupts = <7>; /* SYS_NIRQ cascaded to intc */ - interrupt-parent = <&intc>; - - twl_audio: audio { - compatible = "ti,twl4030-audio"; - codec { - }; - }; - - twl_power: power { - compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off"; - ti,use_poweroff; - }; - }; -}; - -#include "twl4030.dtsi" -#include "twl4030_omap3.dtsi" - -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <100000>; -}; - -&mmc1 { - vmmc-supply = <&vmmc1>; - vqmmc-supply = <&vsim>; - bus-width = <8>; -}; - -&mmc2 { - status = "disabled"; -}; - -&mmc3 { - status = "disabled"; -}; - -&twl_gpio { - ti,use-leds; - /* pullups: BIT(1) */ - ti,pullups = <0x000002>; - /* - * pulldowns: - * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) - * BIT(15), BIT(16), BIT(17) - */ - ti,pulldowns = <0x03a1c4>; -}; - -&usb_otg_hs { - interface-type = <0>; - usb-phy = <&usb2_phy>; - phys = <&usb2_phy>; - phy-names = "usb2-phy"; - mode = <3>; - power = <50>; -}; - -&uart3 { - interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; -}; - -&gpio1 { - pinctrl-names = "default"; - pinctrl-0 = <&gpio1_pins>; -}; - -&usbhshost { - port2-mode = "ehci-phy"; -}; - -&usbhsehci { - phys = <0 &hsusb2_phy>; - - #address-cells = <1>; - #size-cells = <0>; - - hub@2 { - compatible = "usb424,9514"; - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - - ethernet: ethernet@1 { - compatible = "usb424,ec00"; - reg = <1>; - }; - }; -}; - -&vaux2 { - regulator-name = "usb_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; -}; - -&mcbsp2 { - status = "okay"; -}; - -&dss { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = < - &dss_dpi_pins1 - &dss_dpi_pins2 - >; - - port { - dpi_out: endpoint { - remote-endpoint = <&tfp410_in>; - data-lines = <24>; - }; - }; -}; - -&venc { - status = "okay"; - - vdda-supply = <&vdac>; - - port { - venc_out: endpoint { - remote-endpoint = <&tv_connector_in>; - ti,channels = <2>; - }; - }; -}; diff --git a/arch/arm/dts/omap3-beagle.dts b/arch/arm/dts/omap3-beagle.dts deleted file mode 100644 index 321b6d7448..0000000000 --- a/arch/arm/dts/omap3-beagle.dts +++ /dev/null @@ -1,433 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ - */ -/dts-v1/; - -#include "omap34xx.dtsi" - -/ { - model = "TI OMAP3 BeagleBoard"; - compatible = "ti,omap3-beagle", "ti,omap3"; - - cpus { - cpu@0 { - cpu0-supply = <&vcc>; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256 MB */ - }; - - aliases { - display0 = &dvi0; - display1 = &tv0; - }; - - leds { - compatible = "gpio-leds"; - led-pmu-stat { - label = "beagleboard::pmu_stat"; - gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ - }; - - led-heartbeat { - label = "beagleboard::usr0"; - gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */ - linux,default-trigger = "heartbeat"; - }; - - led-mmc { - label = "beagleboard::usr1"; - gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */ - linux,default-trigger = "mmc0"; - }; - }; - - /* HS USB Port 2 Power */ - hsusb2_power: hsusb2_power_reg { - compatible = "regulator-fixed"; - regulator-name = "hsusb2_vbus"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */ - startup-delay-us = <70000>; - }; - - /* HS USB Host PHY on PORT 2 */ - hsusb2_phy: hsusb2_phy { - compatible = "usb-nop-xceiv"; - reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ - vcc-supply = <&hsusb2_power>; - #phy-cells = <0>; - }; - - sound { - compatible = "ti,omap-twl4030"; - ti,model = "omap3beagle"; - - ti,mcbsp = <&mcbsp2>; - }; - - gpio_keys { - compatible = "gpio-keys"; - - user { - label = "user"; - gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - linux,code = <0x114>; - wakeup-source; - }; - - }; - - tfp410: encoder0 { - compatible = "ti,tfp410"; - powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */ - - pinctrl-names = "default"; - pinctrl-0 = <&tfp410_pins>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tfp410_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - - tfp410_out: endpoint { - remote-endpoint = <&dvi_connector_in>; - }; - }; - }; - }; - - dvi0: connector0 { - compatible = "dvi-connector"; - label = "dvi"; - - digital; - - ddc-i2c-bus = <&i2c3>; - - port { - dvi_connector_in: endpoint { - remote-endpoint = <&tfp410_out>; - }; - }; - }; - - tv0: connector1 { - compatible = "svideo-connector"; - label = "tv"; - - port { - tv_connector_in: endpoint { - remote-endpoint = <&venc_out>; - }; - }; - }; - - etb@540000000 { - compatible = "arm,coresight-etb10", "arm,primecell"; - reg = <0x5401b000 0x1000>; - - clocks = <&emu_src_ck>; - clock-names = "apb_pclk"; - port { - etb_in: endpoint { - slave-mode; - remote-endpoint = <&etm_out>; - }; - }; - }; - - etm@54010000 { - compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0x54010000 0x1000>; - - clocks = <&emu_src_ck>; - clock-names = "apb_pclk"; - port { - etm_out: endpoint { - remote-endpoint = <&etb_in>; - }; - }; - }; -}; - -&omap3_pmx_wkup { - gpio1_pins: pinmux_gpio1_pins { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */ - >; - }; -}; - -&omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = < - &hsusb2_pins - >; - - hsusb2_pins: pinmux_hsusb2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ - OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ - OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ - OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ - OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ - OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ - >; - }; - - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ - >; - }; - - tfp410_pins: pinmux_tfp410_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ - >; - }; - - dss_dpi_pins: pinmux_dss_dpi_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ - OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ - OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ - OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ - OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ - OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ - OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ - OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ - OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ - OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ - OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ - OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ - OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ - OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ - OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ - OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ - OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ - OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ - OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ - OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ - OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ - OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ - OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ - OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ - OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ - OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ - OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ - OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ - >; - }; -}; - -&omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = < - &hsusb2_2_pins - >; - - hsusb2_2_pins: pinmux_hsusb2_2_pins { - pinctrl-single,pins = < - OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ - OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ - OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ - OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ - OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ - OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ - >; - }; -}; - -&i2c1 { - clock-frequency = <2600000>; - - twl: twl@48 { - reg = <0x48>; - interrupts = <7>; /* SYS_NIRQ cascaded to intc */ - interrupt-parent = <&intc>; - - twl_audio: audio { - compatible = "ti,twl4030-audio"; - codec { - }; - }; - }; -}; - -#include "twl4030.dtsi" -#include "twl4030_omap3.dtsi" - -&i2c3 { - clock-frequency = <100000>; -}; - -&mmc1 { - vmmc-supply = <&vmmc1>; - vqmmc-supply = <&vsim>; - bus-width = <8>; -}; - -&mmc2 { - status = "disabled"; -}; - -&mmc3 { - status = "disabled"; -}; - -&usbhshost { - port2-mode = "ehci-phy"; -}; - -&usbhsehci { - phys = <0 &hsusb2_phy>; -}; - -&twl_gpio { - ti,use-leds; - /* pullups: BIT(1) */ - ti,pullups = <0x000002>; - /* - * pulldowns: - * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) - * BIT(15), BIT(16), BIT(17) - */ - ti,pulldowns = <0x03a1c4>; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; - interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; -}; - -&gpio1 { - pinctrl-names = "default"; - pinctrl-0 = <&gpio1_pins>; -}; - -&usb_otg_hs { - interface-type = <0>; - usb-phy = <&usb2_phy>; - phys = <&usb2_phy>; - phy-names = "usb2-phy"; - mode = <3>; - power = <50>; -}; - -&vaux2 { - regulator-name = "vdd_ehci"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; -}; - -&mcbsp2 { - status = "okay"; -}; - -/* Needed to power the DPI pins */ -&vpll2 { - regulator-always-on; -}; - -&dss { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&dss_dpi_pins>; - - port { - dpi_out: endpoint { - remote-endpoint = <&tfp410_in>; - data-lines = <24>; - }; - }; -}; - -&venc { - status = "okay"; - - vdda-supply = <&vdac>; - - port { - venc_out: endpoint { - remote-endpoint = <&tv_connector_in>; - ti,channels = <2>; - }; - }; -}; - -&gpmc { - status = "okay"; - ranges = <0 0 0x30000000 0x1000000>; /* CS0 space, 16MB */ - - /* Chip select 0 */ - nand@0,0 { - compatible = "ti,omap2-nand"; - reg = <0 0 4>; /* NAND I/O window, 4 bytes */ - interrupt-parent = <&gpmc>; - interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ - <1 IRQ_TYPE_NONE>; /* termcount */ - ti,nand-ecc-opt = "ham1"; - rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ - nand-bus-width = <16>; - #address-cells = <1>; - #size-cells = <1>; - - gpmc,device-width = <2>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <36>; - gpmc,cs-wr-off-ns = <36>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <24>; - gpmc,adv-wr-off-ns = <36>; - gpmc,oe-on-ns = <6>; - gpmc,oe-off-ns = <48>; - gpmc,we-on-ns = <6>; - gpmc,we-off-ns = <30>; - gpmc,rd-cycle-ns = <72>; - gpmc,wr-cycle-ns = <72>; - gpmc,access-ns = <54>; - gpmc,wr-access-ns = <30>; - - partition@0 { - label = "X-Loader"; - reg = <0 0x80000>; - }; - partition@80000 { - label = "U-Boot"; - reg = <0x80000 0x1e0000>; - }; - partition@1c0000 { - label = "U-Boot Env"; - reg = <0x260000 0x20000>; - }; - partition@280000 { - label = "Kernel"; - reg = <0x280000 0x400000>; - }; - partition@780000 { - label = "Filesystem"; - reg = <0x680000 0xf980000>; - }; - }; -}; diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig index 850ee76746..f15f44fe7d 100644 --- a/arch/arm/mach-omap2/omap3/Kconfig +++ b/arch/arm/mach-omap2/omap3/Kconfig @@ -34,15 +34,6 @@ config TARGET_AM3517_EVM select DM_SERIAL imply CMD_DM -config TARGET_OMAP3_BEAGLE - bool "TI OMAP3 BeagleBoard" - select DM - select DM_GPIO - select DM_SERIAL - select OMAP3_GPIO_5 - select OMAP3_GPIO_6 - imply CMD_DM - config TARGET_CM_T35 bool "CompuLab CM-T3530 and CM-T3730 boards" select OMAP3_GPIO_2 @@ -153,7 +144,6 @@ config SYS_SOC default "omap3" source "board/logicpd/am3517evm/Kconfig" -source "board/beagle/beagle/Kconfig" source "board/timll/devkit8000/Kconfig" source "board/ti/omap3evm/Kconfig" source "board/isee/igep00x0/Kconfig" diff --git a/board/beagle/beagle/Kconfig b/board/beagle/beagle/Kconfig deleted file mode 100644 index eade599dc9..0000000000 --- a/board/beagle/beagle/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_OMAP3_BEAGLE - -config SYS_BOARD - default "beagle" - -config SYS_VENDOR - default "beagle" - -config SYS_CONFIG_NAME - default "omap3_beagle" - -endif diff --git a/board/beagle/beagle/MAINTAINERS b/board/beagle/beagle/MAINTAINERS deleted file mode 100644 index c7fa87acfc..0000000000 --- a/board/beagle/beagle/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -BEAGLE BOARD -M: Tom Rini -S: Maintained -F: board/beagle/beagle/ -F: include/configs/omap3_beagle.h -F: configs/omap3_beagle_defconfig diff --git a/board/beagle/beagle/Makefile b/board/beagle/beagle/Makefile deleted file mode 100644 index fc9288cf18..0000000000 --- a/board/beagle/beagle/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -obj-y := beagle.o -obj-$(CONFIG_LED_STATUS) += led.o diff --git a/board/beagle/beagle/beagle.c b/board/beagle/beagle/beagle.c deleted file mode 100644 index ae258817e9..0000000000 --- a/board/beagle/beagle/beagle.c +++ /dev/null @@ -1,512 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2004-2011 - * Texas Instruments, - * - * Author : - * Sunil Kumar - * Shashi Ranjan - * - * Derived from Beagle Board and 3430 SDP code by - * Richard Woodruff - * Syed Mohammed Khasim - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_LED_STATUS -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "beagle.h" -#include - -#define EXPANSION_EEPROM_I2C_BUS 1 -#define EXPANSION_EEPROM_I2C_ADDRESS 0x50 - -#define TINCANTOOLS_ZIPPY 0x01000100 -#define TINCANTOOLS_ZIPPY2 0x02000100 -#define TINCANTOOLS_TRAINER 0x04000100 -#define TINCANTOOLS_SHOWDOG 0x03000100 -#define KBADC_BEAGLEFPGA 0x01000600 -#define LW_BEAGLETOUCH 0x01000700 -#define BRAINMUX_LCDOG 0x01000800 -#define BRAINMUX_LCDOGTOUCH 0x02000800 -#define BBTOYS_WIFI 0x01000B00 -#define BBTOYS_VGA 0x02000B00 -#define BBTOYS_LCD 0x03000B00 -#define BCT_BRETTL3 0x01000F00 -#define BCT_BRETTL4 0x02000F00 -#define LSR_COM6L_ADPT 0x01001300 -#define BEAGLE_NO_EEPROM 0xffffffff - -DECLARE_GLOBAL_DATA_PTR; - -static struct { - unsigned int device_vendor; - unsigned char revision; - unsigned char content; - char fab_revision[8]; - char env_var[16]; - char env_setting[64]; -} expansion_config; - -/* - * Routine: board_init - * Description: Early hardware init. - */ -int board_init(void) -{ - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ - /* board id for Linux */ - gd->bd->bi_arch_number = MACH_TYPE_OMAP3_BEAGLE; - /* boot param addr */ - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); - -#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE) - status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_ON); -#endif - - return 0; -} - -#if defined(CONFIG_SPL_OS_BOOT) -int spl_start_uboot(void) -{ - /* break into full u-boot on 'c' */ - if (serial_tstc() && serial_getc() == 'c') - return 1; - - return 0; -} -#endif /* CONFIG_SPL_OS_BOOT */ - -/* - * Routine: get_board_revision - * Description: Detect if we are running on a Beagle revision Ax/Bx, - * C1/2/3, C4, xM Ax/Bx or xM Cx. This can be done by reading - * the level of GPIO173, GPIO172 and GPIO171. This should - * result in - * GPIO173, GPIO172, GPIO171: 1 1 1 => Ax/Bx - * GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3 - * GPIO173, GPIO172, GPIO171: 1 0 1 => C4 - * GPIO173, GPIO172, GPIO171: 0 1 0 => xM Cx - * GPIO173, GPIO172, GPIO171: 0 0 0 => xM Ax/Bx - */ -static int get_board_revision(void) -{ - static int revision = -1; - - if (revision == -1) { - if (!gpio_request(171, "rev0") && - !gpio_request(172, "rev1") && - !gpio_request(173, "rev2")) { - gpio_direction_input(171); - gpio_direction_input(172); - gpio_direction_input(173); - - revision = gpio_get_value(173) << 2 | - gpio_get_value(172) << 1 | - gpio_get_value(171); - } else { - printf("Error: unable to acquire board revision GPIOs\n"); - } - } - - return revision; -} - -#ifdef CONFIG_SPL_BUILD -/* - * Routine: get_board_mem_timings - * Description: If we use SPL then there is no x-loader nor config header - * so we have to setup the DDR timings ourself on both banks. - */ -void get_board_mem_timings(struct board_sdrc_timings *timings) -{ - int pop_mfr, pop_id; - - /* - * We need to identify what PoP memory is on the board so that - * we know what timings to use. If we can't identify it then - * we know it's an xM. To map the ID values please see nand_ids.c - */ - identify_nand_chip(&pop_mfr, &pop_id); - - timings->mr = MICRON_V_MR_165; - switch (get_board_revision()) { - case REVISION_C4: - if (pop_mfr == NAND_MFR_STMICRO && pop_id == 0xba) { - /* 512MB DDR */ - timings->mcfg = NUMONYX_V_MCFG_165(512 << 20); - timings->ctrla = NUMONYX_V_ACTIMA_165; - timings->ctrlb = NUMONYX_V_ACTIMB_165; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; - break; - } else if (pop_mfr == NAND_MFR_MICRON && pop_id == 0xba) { - /* Beagleboard Rev C4, 512MB Nand/256MB DDR*/ - timings->mcfg = MICRON_V_MCFG_165(128 << 20); - timings->ctrla = MICRON_V_ACTIMA_165; - timings->ctrlb = MICRON_V_ACTIMB_165; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; - break; - } else if (pop_mfr == NAND_MFR_MICRON && pop_id == 0xbc) { - /* Beagleboard Rev C5, 256MB DDR */ - timings->mcfg = MICRON_V_MCFG_200(256 << 20); - timings->ctrla = MICRON_V_ACTIMA_200; - timings->ctrlb = MICRON_V_ACTIMB_200; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; - break; - } - case REVISION_XM_AB: - case REVISION_XM_C: - if (pop_mfr == 0) { - /* 256MB DDR */ - timings->mcfg = MICRON_V_MCFG_200(256 << 20); - timings->ctrla = MICRON_V_ACTIMA_200; - timings->ctrlb = MICRON_V_ACTIMB_200; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; - } else { - /* 512MB DDR */ - timings->mcfg = NUMONYX_V_MCFG_165(512 << 20); - timings->ctrla = NUMONYX_V_ACTIMA_165; - timings->ctrlb = NUMONYX_V_ACTIMB_165; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; - } - break; - default: - /* Assume 128MB and Micron/165MHz timings to be safe */ - timings->mcfg = MICRON_V_MCFG_165(128 << 20); - timings->ctrla = MICRON_V_ACTIMA_165; - timings->ctrlb = MICRON_V_ACTIMB_165; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; - } -} -#endif - -/* - * Routine: get_expansion_id - * Description: This function checks for expansion board by checking I2C - * bus 1 for the availability of an AT24C01B serial EEPROM. - * returns the device_vendor field from the EEPROM - */ -static unsigned int get_expansion_id(void) -{ - struct udevice *eeprom = NULL; - int ret; - - ret = i2c_get_chip_for_busnum(EXPANSION_EEPROM_I2C_BUS, - EXPANSION_EEPROM_I2C_ADDRESS, 1, &eeprom); - if (ret) - return BEAGLE_NO_EEPROM; - - /* read configuration data */ - ret = dm_i2c_read(eeprom, 0, (uint8_t *)&expansion_config, - sizeof(expansion_config)); - if (ret != 0) { - /* return BEAGLE_NO_EEPROM if eeprom doesn't respond */ - return BEAGLE_NO_EEPROM; - } - - if ((expansion_config.device_vendor == 0xFFFFFF00) || - (expansion_config.device_vendor == 0xFFFFFFFF)) { - printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n"); - } - - /* retry reading configuration data with 16bit addressing */ - ret = i2c_get_chip_for_busnum(EXPANSION_EEPROM_I2C_BUS, - EXPANSION_EEPROM_I2C_ADDRESS, 2, &eeprom); - if (ret) - return BEAGLE_NO_EEPROM; - - ret = dm_i2c_read(eeprom, 0, (uint8_t *)&expansion_config, - sizeof(expansion_config)); - if (ret != 0) - return BEAGLE_NO_EEPROM; - - return expansion_config.device_vendor; -} - -#ifdef CONFIG_VIDEO_OMAP3 -/* - * Configure DSS to display background color on DVID - * Configure VENC to display color bar on S-Video - */ -static void beagle_display_init(void) -{ - omap3_dss_venc_config(&venc_config_std_tv, VENC_HEIGHT, VENC_WIDTH); - switch (get_board_revision()) { - case REVISION_AXBX: - case REVISION_CX: - case REVISION_C4: - omap3_dss_panel_config(&dvid_cfg); - break; - case REVISION_XM_AB: - case REVISION_XM_C: - default: - omap3_dss_panel_config(&dvid_cfg_xm); - break; - } -} - -/* - * Enable DVI power - */ -static void beagle_dvi_pup(void) -{ - uchar val; - - switch (get_board_revision()) { - case REVISION_AXBX: - case REVISION_CX: - case REVISION_C4: - gpio_request(170, "dvi"); - gpio_direction_output(170, 0); - gpio_set_value(170, 1); - break; - case REVISION_XM_AB: - case REVISION_XM_C: - default: - #define GPIODATADIR1 (TWL4030_BASEADD_GPIO+3) - #define GPIODATAOUT1 (TWL4030_BASEADD_GPIO+6) - - twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, GPIODATADIR1, &val); - val |= 4; - twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, GPIODATADIR1, val); - - twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, GPIODATAOUT1, &val); - val |= 4; - twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, GPIODATAOUT1, val); - break; - } -} -#endif - -/* - * Routine: misc_init_r - * Description: Configure board specific parts - */ -int misc_init_r(void) -{ - struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; - struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE; - struct control_prog_io *prog_io_base = (struct control_prog_io *)OMAP34XX_CTRL_BASE; - bool generate_fake_mac = false; - u32 value; - - /* Enable i2c2 pullup resisters */ - value = readl(&prog_io_base->io1); - value &= ~(PRG_I2C2_PULLUPRESX); - writel(value, &prog_io_base->io1); - - switch (get_board_revision()) { - case REVISION_AXBX: - printf("Beagle Rev Ax/Bx\n"); - env_set("beaglerev", "AxBx"); - break; - case REVISION_CX: - printf("Beagle Rev C1/C2/C3\n"); - env_set("beaglerev", "Cx"); - MUX_BEAGLE_C(); - break; - case REVISION_C4: - printf("Beagle Rev C4\n"); - env_set("beaglerev", "C4"); - MUX_BEAGLE_C(); - /* Set VAUX2 to 1.8V for EHCI PHY */ - twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, - TWL4030_PM_RECEIVER_VAUX2_VSEL_18, - TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, - TWL4030_PM_RECEIVER_DEV_GRP_P1); - break; - case REVISION_XM_AB: - printf("Beagle xM Rev A/B\n"); - env_set("beaglerev", "xMAB"); - MUX_BEAGLE_XM(); - /* Set VAUX2 to 1.8V for EHCI PHY */ - twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, - TWL4030_PM_RECEIVER_VAUX2_VSEL_18, - TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, - TWL4030_PM_RECEIVER_DEV_GRP_P1); - generate_fake_mac = true; - break; - case REVISION_XM_C: - printf("Beagle xM Rev C\n"); - env_set("beaglerev", "xMC"); - MUX_BEAGLE_XM(); - /* Set VAUX2 to 1.8V for EHCI PHY */ - twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, - TWL4030_PM_RECEIVER_VAUX2_VSEL_18, - TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, - TWL4030_PM_RECEIVER_DEV_GRP_P1); - generate_fake_mac = true; - break; - default: - printf("Beagle unknown 0x%02x\n", get_board_revision()); - MUX_BEAGLE_XM(); - /* Set VAUX2 to 1.8V for EHCI PHY */ - twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, - TWL4030_PM_RECEIVER_VAUX2_VSEL_18, - TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, - TWL4030_PM_RECEIVER_DEV_GRP_P1); - generate_fake_mac = true; - } - - switch (get_expansion_id()) { - case TINCANTOOLS_ZIPPY: - printf("Recognized Tincantools Zippy board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_TINCANTOOLS_ZIPPY(); - env_set("buddy", "zippy"); - break; - case TINCANTOOLS_ZIPPY2: - printf("Recognized Tincantools Zippy2 board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_TINCANTOOLS_ZIPPY(); - env_set("buddy", "zippy2"); - break; - case TINCANTOOLS_TRAINER: - printf("Recognized Tincantools Trainer board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_TINCANTOOLS_ZIPPY(); - MUX_TINCANTOOLS_TRAINER(); - env_set("buddy", "trainer"); - break; - case TINCANTOOLS_SHOWDOG: - printf("Recognized Tincantools Showdow board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - /* Place holder for DSS2 definition for showdog lcd */ - env_set("defaultdisplay", "showdoglcd"); - env_set("buddy", "showdog"); - break; - case KBADC_BEAGLEFPGA: - printf("Recognized KBADC Beagle FPGA board\n"); - MUX_KBADC_BEAGLEFPGA(); - env_set("buddy", "beaglefpga"); - break; - case LW_BEAGLETOUCH: - printf("Recognized Liquidware BeagleTouch board\n"); - env_set("buddy", "beagletouch"); - break; - case BRAINMUX_LCDOG: - printf("Recognized Brainmux LCDog board\n"); - env_set("buddy", "lcdog"); - break; - case BRAINMUX_LCDOGTOUCH: - printf("Recognized Brainmux LCDog Touch board\n"); - env_set("buddy", "lcdogtouch"); - break; - case BBTOYS_WIFI: - printf("Recognized BeagleBoardToys WiFi board\n"); - MUX_BBTOYS_WIFI() - env_set("buddy", "bbtoys-wifi"); - break; - case BBTOYS_VGA: - printf("Recognized BeagleBoardToys VGA board\n"); - break; - case BBTOYS_LCD: - printf("Recognized BeagleBoardToys LCD board\n"); - break; - case BCT_BRETTL3: - printf("Recognized bct electronic GmbH brettl3 board\n"); - break; - case BCT_BRETTL4: - printf("Recognized bct electronic GmbH brettl4 board\n"); - break; - case LSR_COM6L_ADPT: - printf("Recognized LSR COM6L Adapter Board\n"); - MUX_BBTOYS_WIFI() - env_set("buddy", "lsr-com6l-adpt"); - break; - case BEAGLE_NO_EEPROM: - printf("No EEPROM on expansion board\n"); - env_set("buddy", "none"); - break; - default: - printf("Unrecognized expansion board: %x\n", - expansion_config.device_vendor); - env_set("buddy", "unknown"); - } - - if (expansion_config.content == 1) - env_set(expansion_config.env_var, expansion_config.env_setting); - - twl4030_power_init(); - twl4030_power_mmc_init(0); - - switch (get_board_revision()) { - case REVISION_XM_AB: - twl4030_led_init(TWL4030_LED_LEDEN_LEDBON); - break; - default: - twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON); - break; - } - - /* Set GPIO states before they are made outputs */ - writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1, - &gpio6_base->setdataout); - writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | - GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout); - - /* Configure GPIOs to output */ - writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe); - writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | - GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe); - - omap_die_id_display(); - -#ifdef CONFIG_VIDEO_OMAP3 - beagle_dvi_pup(); - beagle_display_init(); - omap3_dss_enable(); -#endif - - if (generate_fake_mac) - omap_die_id_usbethaddr(); - -#if defined(CONFIG_MTDIDS_DEFAULT) && defined(CONFIG_MTDPARTS_DEFAULT) - if (strlen(CONFIG_MTDIDS_DEFAULT)) - env_set("mtdids", CONFIG_MTDIDS_DEFAULT); - - if (strlen(CONFIG_MTDPARTS_DEFAULT)) - env_set("mtdparts", CONFIG_MTDPARTS_DEFAULT); -#endif - - return 0; -} - -/* - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers specific to the - * hardware. Many pins need to be moved from protect to primary - * mode. - */ -void set_muxconf_regs(void) -{ - MUX_BEAGLE(); -} diff --git a/board/beagle/beagle/beagle.h b/board/beagle/beagle/beagle.h deleted file mode 100644 index ce78ea661b..0000000000 --- a/board/beagle/beagle/beagle.h +++ /dev/null @@ -1,545 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2008 - * Dirk Behme - */ -#ifndef _BEAGLE_H_ -#define _BEAGLE_H_ - -#include - -const omap3_sysinfo sysinfo = { - DDR_STACKED, - "OMAP3 Beagle board", -#if defined(CONFIG_ENV_IS_IN_ONENAND) - "OneNAND", -#else - "NAND", -#endif -}; - -/* BeagleBoard revisions */ -#define REVISION_AXBX 0x7 -#define REVISION_CX 0x6 -#define REVISION_C4 0x5 -#define REVISION_XM_AB 0x0 -#define REVISION_XM_C 0x2 - -/* - * IEN - Input Enable - * IDIS - Input Disable - * PTD - Pull type Down - * PTU - Pull type Up - * DIS - Pull type selection is inactive - * EN - Pull type selection is active - * M0 - Mode 0 - * The commented string gives the final mux configuration for that pin - */ -#define MUX_BEAGLE() \ - /*SDRC*/\ - MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ - MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ - MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ - MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ - MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ - MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ - MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ - MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ - MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ - MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ - MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ - MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ - MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ - MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ - MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ - MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ - MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ - MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ - MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ - MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ - MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ - MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ - MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ - MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ - MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ - MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ - MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ - MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ - MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ - MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ - MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ - MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ - MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ - MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ - MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ - MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ - MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ - /*GPMC*/\ - MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ - MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ - MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ - MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ - MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ - MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ - MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ - MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ - MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ - MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ - MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ - MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ - MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ - MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ - MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ - MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ - MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ - MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ - MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ - MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ - MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ - MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ - MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ - MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ - MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ - MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ - MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ - MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ - MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ - MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ - MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ - MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\ - MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1)) /*SYS_nDMA_REQ2*/\ - MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1)) /*SYS_nDMA_REQ3*/\ - MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1*/\ - MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPMC_WAIT2*/\ - MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/\ - MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ - MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ - MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ - MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ - MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ - MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ - MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ - MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ - /*DSS*/\ - MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ - MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ - MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ - MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ - MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ - MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ - MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ - MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ - MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ - MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ - MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ - MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ - MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ - MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ - MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ - MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ - MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ - MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ - MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ - MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ - MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ - MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ - MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ - MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ - MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ - MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ - MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ - MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ - /*CAMERA*/\ - MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS */\ - MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS */\ - MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ - MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ - MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ - MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ - MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ - MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\ - MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\ - MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\ - MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\ - MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\ - MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\ - MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\ - MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\ - MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ - MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ - MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ - MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ - MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ - MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ - MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ - MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\ - MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\ - /*Audio Interface */\ - MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ - MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\ - MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ - MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ - /*Expansion card */\ - MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ - MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ - MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ - MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ - MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ - MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ - MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ - MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ - MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ - MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ - /*Wireless LAN */\ - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\ - MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\ - MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\ - MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\ - MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\ - MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\ - MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\ - MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\ - MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\ - MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ - /*Bluetooth*/\ - MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1)) /*UART2_CTS*/\ - MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\ - MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1)) /*UART2_TX*/\ - MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M1)) /*UART2_RX*/\ - MUX_VAL(CP(UART2_CTS), (IEN | PTD | DIS | M4)) /*GPIO_144*/\ - MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M4)) /*GPIO_145*/\ - MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M4)) /*GPIO_146*/\ - MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147*/\ - /*Modem Interface */\ - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ - MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/ \ - MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/ \ - MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ - MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M1)) /*SSI1_DAT_RX*/\ - MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M1)) /*SSI1_FLAG_RX*/\ - MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M1)) /*SSI1_RDY_RX*/\ - MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M1)) /*SSI1_WAKE*/\ - MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\ - MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M4)) /*GPIO_157*/\ - MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M4)) /*GPIO_158*/\ - MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\ - MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\ - MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161*/\ - MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\ - /*Serial Interface*/\ - MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX*/\ - MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\ - MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ - MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ - MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ - MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ - MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ - MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ - MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\ - MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\ - MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\ - MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\ - MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\ - MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\ - MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\ - MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\ - MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ - MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ - MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL*/\ - MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA*/\ - MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ - MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ - MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ - MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ - MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\ - MUX_VAL(CP(MCSPI1_CLK), (IEN | PTU | EN | M4)) /*GPIO_171*/\ - MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTU | EN | M4)) /*GPIO_172*/\ - MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTU | EN | M4)) /*GPIO_173*/\ - MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\ - MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\ - MUX_VAL(CP(MCSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176*/\ - /* USB EHCI (port 2) */\ - MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M3)) /*HSUSB2_DATA2*/\ - MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | EN | M3)) /*HSUSB2_DATA7*/\ - MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | EN | M3)) /*HSUSB2_DATA4*/\ - MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | EN | M3)) /*HSUSB2_DATA5*/\ - MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M3)) /*HSUSB2_DATA6*/\ - MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M3)) /*HSUSB2_DATA3*/\ - MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\ - MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\ - MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | EN | M3)) /*HSUSB2_DIR*/\ - MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | EN | M3)) /*HSUSB2_NXT*/\ - MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | EN | M3)) /*HSUSB2_DATA0*/\ - MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | EN | M3)) /*HSUSB2_DATA1*/\ - /*Control and debug */\ - MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ - MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ - MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ - MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ - MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3*/\ - MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 - MMC1_WP*/\ - MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ - MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ - MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ - MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/ \ - MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\ - MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ - MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_STP*/\ - MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB1_CLK*/\ - MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA0*/\ - MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA1*/\ - MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA2*/\ - MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA7*/\ - MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA4*/\ - MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA5*/\ - MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA6*/\ - MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA3*/\ - MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DIR*/\ - MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_NXT*/\ - MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\ - MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\ - MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\ - MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\ - MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\ - MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\ - MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\ - MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\ - MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\ - MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\ - MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\ - MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\ - MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\ - MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\ - MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\ - MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\ - MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\ - MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\ - MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\ - MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\ - MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\ - MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\ - MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\ - MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\ - MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\ - MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\ - MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\ - MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\ - MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\ - MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\ - MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\ - MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\ - MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\ - MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\ - MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\ - MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\ - MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26mi*/\ - MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespwron*/\ - MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswarm */\ - MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq */\ - MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\ - MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\ - MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\ - MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmareq0*/\ - MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmareq1*/\ - MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmareq2*/\ - MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmareq3*/\ - MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrst*/\ - MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\ - MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\ - MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\ - MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\ - MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtck*/\ - MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\ - MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeup*/\ - MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlereq*/\ - MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleack*/\ - MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\ - MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\ - MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\ - MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\ - MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\ - MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/\ - MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ - MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/ - -#define MUX_BEAGLE_C() \ - MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\ - MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\ - MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\ - MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\ - MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\ - MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/\ - MUX_VAL(CP(UART2_RX), (IDIS | PTU | EN | M4)) /*GPIO_147*/ - -#define MUX_BEAGLE_XM() \ - MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | EN | M4)) /*GPIO_56*/\ - MUX_VAL(CP(GPMC_WAIT1), (IDIS | PTU | EN | M4)) /*GPIO_63*/\ - MUX_VAL(CP(MMC1_DAT7), (IDIS | PTU | EN | M4)) /*GPIO_129*/\ - MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\ - MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\ - MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\ - MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\ - MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\ - MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\ - MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/\ - MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M7)) /*safe_mode*/\ - MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M7)) /*safe_mode*/\ - MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M7)) /*safe_mode*/\ - MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M7)) /*safe_mode*/\ - MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M7)) /*safe_mode*/\ - MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M7)) /*safe_mode*/\ - MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M3)) /*DSS_DATA0*/\ - MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M3)) /*DSS_DATA1*/\ - MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M3)) /*DSS_DATA2*/\ - MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M3)) /*DSS_DATA3*/\ - MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M3)) /*DSS_DATA4*/\ - MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M3)) /*DSS_DATA5*/\ - MUX_VAL(CP(SYS_BOOT0), (IDIS | PTD | DIS | M3)) /*DSS_DATA18*/\ - MUX_VAL(CP(SYS_BOOT1), (IDIS | PTD | DIS | M3)) /*DSS_DATA19*/\ - MUX_VAL(CP(SYS_BOOT3), (IDIS | PTD | DIS | M3)) /*DSS_DATA20*/\ - MUX_VAL(CP(SYS_BOOT4), (IDIS | PTD | DIS | M3)) /*DSS_DATA21*/\ - MUX_VAL(CP(SYS_BOOT5), (IDIS | PTD | DIS | M3)) /*DSS_DATA22*/\ - MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M3)) /*DSS_DATA23*/ - -#define MUX_TINCANTOOLS_ZIPPY() \ - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\ - MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\ - MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\ - MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\ - MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\ - MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\ - MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT0*/\ - MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT1*/\ - MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1)) /*MMC2_DIR_CMD*/\ - MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M1)) /*MMC2_CLKIN*/\ - MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTU | EN | M1)) /*MCSPI4_CLK*/\ - MUX_VAL(CP(MCBSP1_FSR), (IEN | PTU | EN | M4)) /*GPIO_157*/\ - MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | EN | M1)) /*MCSPI4_SIMO*/\ - MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M1)) /*MCSPI4_SOMI*/\ - MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | EN | M1)) /*MCSPI4_CS0*/\ - MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_162*/\ - MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\ - MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\ - MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/ - -#define MUX_TINCANTOOLS_TRAINER() \ - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\ - MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\ - MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\ - MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\ - MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\ - MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\ - MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\ - MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\ - MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\ - MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ - MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4)) /*GPIO_140*/\ - MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTU | EN | M4)) /*GPIO_141*/\ - MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTU | EN | M4)) /*GPIO_162*/ - -#define MUX_KBADC_BEAGLEFPGA() \ - MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTU | DIS | M1)) /*MCSPI4_CLK*/\ - MUX_VAL(CP(MCBSP1_DX), (IDIS | PTU | DIS | M1)) /*MCSPI4_SIMO*/\ - MUX_VAL(CP(MCBSP1_DR), (IEN | PTU | EN | M1)) /*MCSPI4_SOMI*/\ - MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTU | DIS | M1)) /*MCSPI4_CS0*/ - -#define MUX_BBTOYS_WIFI() \ - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\ - MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\ - MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\ - MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\ - MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\ - MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\ - MUX_VAL(CP(MMC2_DAT4), (IDIS | PTU | EN | M4)) /*GPIO_136 FM_EN/BT_WU*/\ - MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137 WLAN_IRQ*/\ - MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | EN | M4)) /*GPIO_138 BT_EN*/\ - MUX_VAL(CP(MMC2_DAT7), (IDIS | PTU | EN | M4)) /*GPIO_139 WLAN_EN*/ - -/* - * Display Configuration - */ - -#define DVI_BEAGLE_ORANGE_COL 0x00FF8000 -#define VENC_HEIGHT 0x00ef -#define VENC_WIDTH 0x027f - -/* - * Configure VENC in DSS for Beagle to generate Color Bar - * - * Kindly refer to OMAP TRM for definition of these values. - */ -static const struct venc_regs venc_config_std_tv = { - .status = 0x0000001B, - .f_control = 0x00000040, - .vidout_ctrl = 0x00000000, - .sync_ctrl = 0x00008000, - .llen = 0x00008359, - .flens = 0x0000020C, - .hfltr_ctrl = 0x00000000, - .cc_carr_wss_carr = 0x043F2631, - .c_phase = 0x00000024, - .gain_u = 0x00000130, - .gain_v = 0x00000198, - .gain_y = 0x000001C0, - .black_level = 0x0000006A, - .blank_level = 0x0000005C, - .x_color = 0x00000000, - .m_control = 0x00000001, - .bstamp_wss_data = 0x0000003F, - .s_carr = 0x21F07C1F, - .line21 = 0x00000000, - .ln_sel = 0x00000015, - .l21__wc_ctl = 0x00001400, - .htrigger_vtrigger = 0x00000000, - .savid__eavid = 0x069300F4, - .flen__fal = 0x0016020C, - .lal__phase_reset = 0x00060107, - .hs_int_start_stop_x = 0x008D034E, - .hs_ext_start_stop_x = 0x000F0359, - .vs_int_start_x = 0x01A00000, - .vs_int_stop_x__vs_int_start_y = 0x020501A0, - .vs_int_stop_y__vs_ext_start_x = 0x01AC0024, - .vs_ext_stop_x__vs_ext_start_y = 0x020D01AC, - .vs_ext_stop_y = 0x00000006, - .avid_start_stop_x = 0x03480079, - .avid_start_stop_y = 0x02040024, - .fid_int_start_x__fid_int_start_y = 0x0001008A, - .fid_int_offset_y__fid_ext_start_x = 0x01AC0106, - .fid_ext_start_y__fid_ext_offset_y = 0x01060006, - .tvdetgp_int_start_stop_x = 0x00140001, - .tvdetgp_int_start_stop_y = 0x00010001, - .gen_ctrl = 0x00FF0000, - .output_control = 0x0000000D, - .dac_b__dac_c = 0x00000000 -}; - -/* - * Configure Timings for DVI D - */ -static const struct panel_config dvid_cfg = { - .timing_h = 0x0ff03f31, /* Horizontal timing */ - .timing_v = 0x01400504, /* Vertical timing */ - .pol_freq = 0x00007028, /* Pol Freq */ - .divisor = 0x00010006, /* 72Mhz Pixel Clock */ - .lcd_size = 0x02ff03ff, /* 1024x768 */ - .panel_type = 0x01, /* TFT */ - .data_lines = 0x03, /* 24 Bit RGB */ - .load_mode = 0x02, /* Frame Mode */ - .panel_color = DVI_BEAGLE_ORANGE_COL, /* ORANGE */ - .gfx_format = GFXFORMAT_RGB24_UNPACKED, -}; - -static const struct panel_config dvid_cfg_xm = { - .timing_h = 0x1a4024c9, /* Horizontal timing */ - .timing_v = 0x02c00509, /* Vertical timing */ - .pol_freq = 0x00007028, /* Pol Freq */ - .divisor = 0x00010001, /* 96MHz Pixel Clock */ - .lcd_size = 0x02ff03ff, /* 1024x768 */ - .panel_type = 0x01, /* TFT */ - .data_lines = 0x03, /* 24 Bit RGB */ - .load_mode = 0x02, /* Frame Mode */ - .panel_color = DVI_BEAGLE_ORANGE_COL, /* ORANGE */ - .gfx_format = GFXFORMAT_RGB24_UNPACKED, -}; -#endif diff --git a/board/beagle/beagle/led.c b/board/beagle/beagle/led.c deleted file mode 100644 index efbd7c1e0e..0000000000 --- a/board/beagle/beagle/led.c +++ /dev/null @@ -1,70 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (c) 2010 Texas Instruments, Inc. - * Jason Kridner - */ -#include -#include -#include -#include -#include - -/* GPIO pins for the LEDs */ -#define BEAGLE_LED_USR0 150 -#define BEAGLE_LED_USR1 149 - -#ifdef CONFIG_LED_STATUS_GREEN -void green_led_off(void) -{ - __led_set(CONFIG_LED_STATUS_GREEN, 0); -} - -void green_led_on(void) -{ - __led_set(CONFIG_LED_STATUS_GREEN, 1); -} -#endif - -static int get_led_gpio(led_id_t mask) -{ -#ifdef CONFIG_LED_STATUS0 - if (CONFIG_LED_STATUS_BIT & mask) - return BEAGLE_LED_USR0; -#endif -#ifdef CONFIG_LED_STATUS1 - if (CONFIG_LED_STATUS_BIT1 & mask) - return BEAGLE_LED_USR1; -#endif - - return 0; -} - -void __led_init (led_id_t mask, int state) -{ - int toggle_gpio; - - toggle_gpio = get_led_gpio(mask); - - if (toggle_gpio && !gpio_request(toggle_gpio, "led")) - __led_set(mask, state); -} - -void __led_toggle (led_id_t mask) -{ - int state, toggle_gpio; - - toggle_gpio = get_led_gpio(mask); - if (toggle_gpio) { - state = gpio_get_value(toggle_gpio); - gpio_direction_output(toggle_gpio, !state); - } -} - -void __led_set (led_id_t mask, int state) -{ - int toggle_gpio; - - toggle_gpio = get_led_gpio(mask); - if (toggle_gpio) - gpio_direction_output(toggle_gpio, state); -} diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig deleted file mode 100644 index f76709389c..0000000000 --- a/configs/omap3_beagle_defconfig +++ /dev/null @@ -1,115 +0,0 @@ -CONFIG_ARM=y -# CONFIG_SPL_USE_ARCH_MEMCPY is not set -# CONFIG_SPL_USE_ARCH_MEMSET is not set -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SYS_MALLOC_F_LEN=0x4000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00 -CONFIG_DEFAULT_DEVICE_TREE="omap3-beagle" -CONFIG_SPL_TEXT_BASE=0x40200000 -CONFIG_TARGET_OMAP3_BEAGLE=y -CONFIG_SYS_MONITOR_LEN=262144 -CONFIG_SPL_SYS_MALLOC_F_LEN=0x400 -CONFIG_SPL=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" -CONFIG_USE_PREBOOT=y -CONFIG_DEFAULT_FDT_FILE="omap3-beagle.dtb" -CONFIG_SYS_PBSIZE=1055 -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_SPL_MAX_SIZE=0xec00 -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_SYS_MALLOC=y -CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 -# CONFIG_SPL_FS_EXT4 is not set -CONFIG_SPL_MTD=y -CONFIG_SPL_NAND_DRIVERS=y -CONFIG_SPL_NAND_ECC=y -CONFIG_SPL_NAND_SIMPLE=y -CONFIG_SPL_NAND_BASE=y -CONFIG_SYS_PROMPT="BeagleBoard # " -CONFIG_CMD_SPL=y -CONFIG_CMD_SPL_NAND_OFS=0x280000 -CONFIG_CMD_SPL_WRITE_SIZE=0x20000 -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_NAND_TRIMFFS=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FS_UUID=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1920k(u-boot),128k(u-boot-env),128k(dtb),6m(kernel),-(rootfs)" -CONFIG_CMD_UBI=y -# CONFIG_ISO_PARTITION is not set -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SPL_PARTITION_UUIDS=y -CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent" -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_VERSION_VARIABLE=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SPL_OF_TRANSLATE=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_BUF_ADDR=0x82000000 -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_LED_STATUS=y -CONFIG_LED_STATUS0=y -CONFIG_LED_STATUS_BIT=1 -CONFIG_LED_STATUS_STATE=2 -CONFIG_LED_STATUS1=y -CONFIG_LED_STATUS_BIT1=2 -CONFIG_LED_STATUS_STATE1=2 -CONFIG_LED_STATUS_BOOT_ENABLE=y -CONFIG_LED_STATUS_BOOT=1 -CONFIG_LED_STATUS_GREEN_ENABLE=y -CONFIG_LED_STATUS_GREEN=2 -CONFIG_LED_STATUS_CMD=y -CONFIG_TWL4030_LED=y -CONFIG_MMC_OMAP_HS=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_OMAP_ECCSCHEME_HAM1_CODE_HW=y -CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 -CONFIG_SYS_NAND_PAGE_SIZE=0x800 -CONFIG_SYS_NAND_OOBSIZE=0x40 -CONFIG_SYS_NAND_BUSWIDTH_16BIT=y -CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y -CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 -CONFIG_PINCTRL=y -CONFIG_PINCTRL_SINGLE=y -CONFIG_DM_PMIC=y -# CONFIG_SPL_PMIC_CHILDREN is not set -CONFIG_DM_REGULATOR=y -CONFIG_DM_REGULATOR_FIXED=y -CONFIG_DM_REGULATOR_GPIO=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -# CONFIG_SPL_DM_USB is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_OMAP3=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_OMAP2PLUS=y -CONFIG_TWL4030_USB=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_ASIX=y -CONFIG_USB_ETHER_MCS7830=y -CONFIG_USB_ETHER_SMSC95XX=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="TI" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0xd022 -CONFIG_USB_ETHER=y -CONFIG_BCH=y diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h deleted file mode 100644 index b616dd2608..0000000000 --- a/include/configs/omap3_beagle.h +++ /dev/null @@ -1,197 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2006-2008 - * Texas Instruments. - * Richard Woodruff - * Syed Mohammed Khasim - * - * Configuration settings for the TI OMAP3530 Beagle board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -/* - * We are only ever GP parts and will utilize all of the "downloaded image" - * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB). - */ - -/* NAND */ -#if defined(CONFIG_MTD_RAW_NAND) -#define CFG_SYS_FLASH_BASE NAND_BASE -#define CFG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ - 10, 11, 12, 13} -#define CFG_SYS_NAND_ECCSIZE 512 -#define CFG_SYS_NAND_ECCBYTES 3 -/* NAND: SPL falcon mode configs */ -#endif /* CONFIG_MTD_RAW_NAND */ - -/* DSS Support */ - -/* TWL4030 LED Support */ - -#define MEM_LAYOUT_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV - -#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \ - "bootcmd_" #devtypel #instance "=" \ - "setenv mmcdev " #instance "; " \ - "run mmcboot\0" -#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \ - #devtypel #instance " " - -#if defined(CONFIG_MTD_RAW_NAND) - -#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \ - "bootcmd_" #devtypel #instance "=" \ - "if test ${mtdids} = '' || test ${mtdparts} = '' ; then " \ - "echo NAND boot disabled: No mtdids and/or mtdparts; " \ - "else " \ - "run nandboot; " \ - "fi\0" -#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ - #devtypel #instance " " - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(LEGACY_MMC, legacy_mmc, 0) \ - func(UBIFS, ubifs, 0, rootfs, rootfs) \ - func(NAND, nand, 0) - -#else /* !CONFIG_MTD_RAW_NAND */ - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(LEGACY_MMC, legacy_mmc, 0) - -#endif /* CONFIG_MTD_RAW_NAND */ - -#include - -#define CFG_EXTRA_ENV_SETTINGS \ - MEM_LAYOUT_ENV_SETTINGS \ - "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ - "fdt_high=0xffffffff\0" \ - "console=ttyO2,115200n8\0" \ - "bootdir=/boot\0" \ - "bootenv=uEnv.txt\0" \ - "bootfile=zImage\0" \ - "bootpart=0:2\0" \ - "usbtty=cdc_acm\0" \ - "mpurate=auto\0" \ - "buddy=none\0" \ - "camera=none\0" \ - "vram=12M\0" \ - "dvimode=640x480MR-16@60\0" \ - "defaultdisplay=dvi\0" \ - "defaultargs=setenv defargs " \ - "mpurate=${mpurate} " \ - "buddy=${buddy} "\ - "camera=${camera} "\ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapdss.def_disp=${defaultdisplay}\0" \ - "optargs=\0" \ - "findfdt=" \ - "if test $beaglerev = AxBx; then " \ - "setenv fdtfile omap3-beagle.dtb; fi; " \ - "if test $beaglerev = Cx; then " \ - "setenv fdtfile omap3-beagle.dtb; fi; " \ - "if test $beaglerev = C4; then " \ - "setenv fdtfile omap3-beagle.dtb; fi; " \ - "if test $beaglerev = xMAB; then " \ - "setenv fdtfile omap3-beagle-xm-ab.dtb; fi; " \ - "if test $beaglerev = xMC; then " \ - "setenv fdtfile omap3-beagle-xm.dtb; fi; " \ - "if test $fdtfile = undefined; then " \ - "echo WARNING: Could not determine device tree to use; fi\0" \ - "mmcdev=0\0" \ - "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "mmcargs=run defaultargs; setenv bootargs console=${console} " \ - "${mtdparts} " \ - "${defargs} " \ - "${optargs} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "userbutton_xm=gpio input 4;\0" \ - "userbutton_nonxm=gpio input 7;\0" \ - "userbutton=if gpio input 173; then " \ - "run userbutton_xm; " \ - "else " \ - "run userbutton_nonxm; " \ - "fi;\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ - "ext4bootenv=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootenv}\0" \ - "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ - "env import -t ${loadaddr} ${filesize}\0" \ - "mmcbootenv=setenv bootpart ${mmcdev}:${mmcpart}; " \ - "mmc dev ${mmcdev}; " \ - "if mmc rescan; then " \ - "if run userbutton; then " \ - "setenv bootenv uEnv.txt;" \ - "else " \ - "setenv bootenv user.txt;" \ - "fi;" \ - "run loadbootenv && run importbootenv; " \ - "run ext4bootenv && run importbootenv; " \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...; " \ - "run uenvcmd; " \ - "fi; " \ - "fi\0" \ - "validatefdt=" \ - "if test $beaglerev = xMAB; then " \ - "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \ - "setenv fdtfile omap3-beagle-xm.dtb; " \ - "fi; " \ - "fi; \0" \ - "loadimage=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loaddtb=run validatefdt; ext4load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "mmcboot=run mmcbootenv; " \ - "if run loadimage && run loaddtb; then " \ - "echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} ...; " \ - "run mmcargs; " \ - "if test ${bootfile} = uImage; then " \ - "bootm ${loadaddr} - ${fdtaddr}; " \ - "fi; " \ - "if test ${bootfile} = zImage; then " \ - "bootz ${loadaddr} - ${fdtaddr}; " \ - "fi; " \ - "fi\0" \ - "nandroot=ubi0:rootfs ubi.mtd=rootfs rw\0" \ - "nandrootfstype=ubifs rootwait\0" \ - "nandargs=run defaultargs; setenv bootargs console=${console} " \ - "${mtdparts} " \ - "${defargs} " \ - "${optargs} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "nandboot=if nand read ${loadaddr} kernel && nand read ${fdtaddr} dtb; then " \ - "echo Booting uImage from NAND MTD 'kernel' partition ...; " \ - "run nandargs; " \ - "bootm ${loadaddr} - ${fdtaddr}; " \ - "fi\0" \ - "loadramdisk=ext4load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \ - "ramdisk=rootfs.ext2.gz.uboot\0" \ - "ramdisk_size=16384\0" \ - "ramroot=/dev/ram rw\0" \ - "ramrootfstype=ext2\0" \ - "ramargs=run defaultargs; setenv bootargs console=${console} " \ - "${mtdparts} " \ - "${defargs} " \ - "${optargs} " \ - "root=${ramroot} ramdisk_size=${ramdisk_size} " \ - "rootfstype=${ramrootfstype}\0" \ - "ramboot=run mmcbootenv; " \ - "if run loadimage && run loaddtb && run loadramdisk; then " \ - "echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} w/ramdisk ...; " \ - "run ramargs; " \ - "bootz ${loadaddr} ${rdaddr} ${fdtaddr}; " \ - "fi\0" \ - BOOTENV - -#endif /* __CONFIG_H */