From: Fabio Estevam <festevam@denx.de>
Date: Fri, 18 Oct 2024 17:55:48 +0000 (-0300)
Subject: mx6ul_14x14_evk: Remove unneeded USB board code
X-Git-Url: http://git.dujemihanovic.xyz/html/static/gitweb.css?a=commitdiff_plain;h=c39eb90f37012bc77ea034bc62d1dc8ff0646472;p=u-boot.git

mx6ul_14x14_evk: Remove unneeded USB board code

With CONFIG_DM_USB, there is no longer the need for any USB board code
anymore.

Remove the unneeded USB board code.

While at it, also remove the uneeeded CONFIG_USB_MAX_CONTROLLER_COUNT
option.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---

diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
index c4ab59da78..fbb5a12212 100644
--- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
+++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
@@ -31,8 +31,6 @@
 #include <power/pmic.h>
 #include <power/pfuze3000_pmic.h>
 #include "../common/pfuze.h"
-#include <usb.h>
-#include <usb/ehci-ci.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -155,49 +153,6 @@ int board_mmc_init(struct bd_info *bis)
 }
 #endif
 
-#ifdef CONFIG_USB_EHCI_MX6
-#ifndef CONFIG_DM_USB
-
-#define USB_OTHERREGS_OFFSET	0x800
-#define UCTRL_PWR_POL		(1 << 9)
-
-static iomux_v3_cfg_t const usb_otg_pads[] = {
-	MX6_PAD_GPIO1_IO00__ANATOP_OTG1_ID | MUX_PAD_CTRL(OTG_ID_PAD_CTRL),
-};
-
-/* At default the 3v3 enables the MIC2026 for VBUS power */
-static void setup_usb(void)
-{
-	imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
-					 ARRAY_SIZE(usb_otg_pads));
-}
-
-int board_usb_phy_mode(int port)
-{
-	if (port == 1)
-		return USB_INIT_HOST;
-	else
-		return usb_phy_mode(port);
-}
-
-int board_ehci_hcd_init(int port)
-{
-	u32 *usbnc_usb_ctrl;
-
-	if (port > 1)
-		return -EINVAL;
-
-	usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
-				 port * 4);
-
-	/* Set Power polarity */
-	setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
-
-	return 0;
-}
-#endif
-#endif
-
 #ifdef CONFIG_FEC_MXC
 static int setup_fec(int fec_id)
 {
@@ -284,12 +239,6 @@ int board_init(void)
 	setup_fec(CFG_FEC_ENET_DEV);
 #endif
 
-#ifdef CONFIG_USB_EHCI_MX6
-#ifndef CONFIG_DM_USB
-	setup_usb();
-#endif
-#endif
-
 #ifdef CONFIG_FSL_QSPI
 	board_qspi_init();
 #endif
diff --git a/configs/mx6ul_14x14_evk_defconfig b/configs/mx6ul_14x14_evk_defconfig
index bbeb364e25..522c5660d7 100644
--- a/configs/mx6ul_14x14_evk_defconfig
+++ b/configs/mx6ul_14x14_evk_defconfig
@@ -92,7 +92,6 @@ CONFIG_SOFT_SPI=y
 CONFIG_IMX_THERMAL=y
 CONFIG_USB=y
 CONFIG_SPL_USB_HOST=y
-CONFIG_USB_MAX_CONTROLLER_COUNT=2
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_SPL_USB_GADGET=y