From: Mathew McBride <matt@traverse.com.au>
Date: Fri, 21 Jul 2023 04:39:21 +0000 (+0000)
Subject: board: traverse: ten64: add NAND based OpenWrt bootcmd
X-Git-Tag: v2025.01-rc5-pxa1908~903^2~10
X-Git-Url: http://git.dujemihanovic.xyz/html/static/gitweb.css?a=commitdiff_plain;h=bcedba521bb6f5a4b117aeb342229de27bfe9042;p=u-boot.git

board: traverse: ten64: add NAND based OpenWrt bootcmd

The default Ten64 MTD configuration reserves two ubifs partitions
for OpenWrt residing on NAND flash. Add the bootcmd for this system
into the default environment.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---

diff --git a/include/configs/ten64.h b/include/configs/ten64.h
index 1b8b27c230..f9e800d4b6 100644
--- a/include/configs/ten64.h
+++ b/include/configs/ten64.h
@@ -39,6 +39,11 @@
 	func(PXE, pxe, 0)
 #include <config_distro_bootcmd.h>
 
+#define OPENWRT_NAND_BOOTCMD	\
+	"bootcmd_openwrt_nand=ubi part ubi${openwrt_active_sys} && "\
+	"ubi read $load_addr kernel && " \
+	"setenv bootargs \"root=/dev/ubiblock0_1 earlycon ubi.mtd=ubi${openwrt_active_sys}\" &&"\
+	"bootm $load_addr#ten64\0"
 #undef CFG_EXTRA_ENV_SETTINGS
 
 #define CFG_EXTRA_ENV_SETTINGS \
@@ -48,6 +53,8 @@
 	"kernel_addr_r=0x81000000\0"		\
 	"load_addr=0xa0000000\0"		\
 	BOOTENV \
+	OPENWRT_NAND_BOOTCMD \
+	"openwrt_active_sys=a\0" \
 	"load_efi_dtb=mtd read devicetree $fdt_addr_r && fdt addr $fdt_addr_r && " \
 	"fdt resize && fdt boardsetup\0" \
 	"bootcmd_recovery=mtd read recovery 0xa0000000 && " \