From: Patrick Barsanti Date: Thu, 13 Jun 2024 10:24:09 +0000 (+0200) Subject: arm: fsl: imx6ulz_bsh_smm_m2: Migrate to OF_UPSTREAM X-Git-Url: http://git.dujemihanovic.xyz/html/static/gitweb.css?a=commitdiff_plain;h=b1ee6bcbff9db062f172cbb6b8e70386e45a00e5;p=u-boot.git arm: fsl: imx6ulz_bsh_smm_m2: Migrate to OF_UPSTREAM Migrate imx6ulz_bsh_smm_m2 board to OF_UPSTREAM. Signed-off-by: Patrick Barsanti --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 9db614def7..06c234afbe 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -864,7 +864,6 @@ dtb-$(CONFIG_MX6ULL) += \ imx6ull-phytec-segin-ff-rdk-emmc.dtb \ imx6ull-dart-6ul.dtb \ imx6ull-somlabs-visionsom.dtb \ - imx6ulz-bsh-smm-m2.dtb \ imx6ulz-14x14-evk.dtb dtb-$(CONFIG_ARCH_MX6) += \ diff --git a/arch/arm/dts/imx6ulz-bsh-smm-m2.dts b/arch/arm/dts/imx6ulz-bsh-smm-m2.dts deleted file mode 100644 index 59bcfc9a6b..0000000000 --- a/arch/arm/dts/imx6ulz-bsh-smm-m2.dts +++ /dev/null @@ -1,146 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2021 BSH Hausgeraete GmbH - */ - -/dts-v1/; - -#include -#include "imx6ulz.dtsi" - -/ { - model = "BSH SMM M2"; - compatible = "bsh,imx6ulz-bsh-smm-m2", "fsl,imx6ull", "fsl,imx6ulz"; - - chosen { - stdout-path = &uart4; - }; - - usdhc2_pwrseq: usdhc2-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; - }; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - nand-on-flash-bbt; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm4330-bt"; - max-speed = <3000000>; - shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "okay"; -}; - -&usbotg1 { - dr_mode = "peripheral"; - srp-disable; - hnp-disable; - adp-disable; - status = "okay"; -}; - -&usbphy1 { - fsl,tx-d-cal = <106>; -}; - -&usdhc2 { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wlan>; - bus-width = <4>; - no-1-8-v; - non-removable; - cap-power-off-card; - keep-power-in-suspend; - cap-sdio-irq; - mmc-pwrseq = <&usdhc2_pwrseq>; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&gpio1>; - interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; - }; -}; - -&wdog1 { - status = "okay"; -}; - -&iomuxc { - pinctrl_gpmi_nand: gpmi-nand { - fsl,pins = < - MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 - MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 - MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 - MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 - MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 - MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 - MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 - MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 - MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 - MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 - MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 - MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 - MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 - MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 - MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 - MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b099 - MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 - MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b099 - MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x79 /* BT_REG_ON */ - MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x100b1 /* BT_DEV_WAKE out */ - MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0 /* BT_HOST_WAKE in */ - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 - MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_wlan: wlangrp { - fsl,pins = < - MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 - MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10059 - MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059 - MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059 - MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059 - MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059 - MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x79 /* WL_REG_ON */ - MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0x100b1 /* WL_DEV_WAKE - WiFi_GPIO_4 - WiFi FW UART */ - MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b1 /* WL_HOST_WAKE - WIFI_GPIO_0 - OOB IRQ */ - MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT 0x4001b031 /* OSC 32Khz wifi clk in */ - >; - }; -}; diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 15ee2b933f..7800553ae8 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -481,6 +481,7 @@ config TARGET_MX6ULZ_SMM_M2 select DM_MTD select DM_THERMAL select SUPPORT_SPL + imply OF_UPSTREAM config TARGET_MYS_6ULX bool "MYiR MYS-6ULX" diff --git a/configs/imx6ulz_smm_m2_defconfig b/configs/imx6ulz_smm_m2_defconfig index 064758c48c..93ead4c373 100644 --- a/configs/imx6ulz_smm_m2_defconfig +++ b/configs/imx6ulz_smm_m2_defconfig @@ -11,7 +11,7 @@ CONFIG_ENV_SIZE=0x20000 CONFIG_ENV_OFFSET=0x400000 CONFIG_MX6ULL=y CONFIG_TARGET_MX6ULZ_SMM_M2=y -CONFIG_DEFAULT_DEVICE_TREE="imx6ulz-bsh-smm-m2" +CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6ulz-bsh-smm-m2" CONFIG_SPL_TEXT_BASE=0x00908000 CONFIG_SPL_SERIAL=y CONFIG_SPL_BSS_START_ADDR=0x84100000