From: Patrick Delaunay Date: Tue, 20 Jul 2021 18:09:55 +0000 (+0200) Subject: net: dwc_eth_qos: use generic ethernet phy for stm32 variant X-Git-Url: http://git.dujemihanovic.xyz/html/static/gitweb.css?a=commitdiff_plain;h=9dbdc234a78f88bfa5d1d09046babf960c512298;p=u-boot.git net: dwc_eth_qos: use generic ethernet phy for stm32 variant Use the generic ethernet phy which already manages the correct binding for gpio reset, including the assert an deassert delays. Reviewed-by: Ramon Fried Signed-off-by: Patrick Delaunay --- diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 726ad36b7c..130db9fb39 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -206,6 +206,7 @@ config DWC_ETH_QOS_IMX config DWC_ETH_QOS_STM32 bool "Synopsys DWC Ethernet QOS device support for STM32" depends on DWC_ETH_QOS + select DM_ETH_PHY default y if ARCH_STM32MP help The Synopsys Designware Ethernet QOS IP block with the specific diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c index a57c35785f..9b1746b78b 100644 --- a/drivers/net/dwc_eth_qos.c +++ b/drivers/net/dwc_eth_qos.c @@ -696,29 +696,6 @@ static int eqos_start_resets_tegra186(struct udevice *dev) static int eqos_start_resets_stm32(struct udevice *dev) { - struct eqos_priv *eqos = dev_get_priv(dev); - int ret; - - debug("%s(dev=%p):\n", __func__, dev); - if (dm_gpio_is_valid(&eqos->phy_reset_gpio)) { - ret = dm_gpio_set_value(&eqos->phy_reset_gpio, 1); - if (ret < 0) { - pr_err("dm_gpio_set_value(phy_reset, assert) failed: %d", - ret); - return ret; - } - - udelay(2); - - ret = dm_gpio_set_value(&eqos->phy_reset_gpio, 0); - if (ret < 0) { - pr_err("dm_gpio_set_value(phy_reset, deassert) failed: %d", - ret); - return ret; - } - } - debug("%s: OK\n", __func__); - return 0; } @@ -739,18 +716,6 @@ static int eqos_stop_resets_tegra186(struct udevice *dev) static int eqos_stop_resets_stm32(struct udevice *dev) { - struct eqos_priv *eqos = dev_get_priv(dev); - int ret; - - if (dm_gpio_is_valid(&eqos->phy_reset_gpio)) { - ret = dm_gpio_set_value(&eqos->phy_reset_gpio, 1); - if (ret < 0) { - pr_err("dm_gpio_set_value(phy_reset, assert) failed: %d", - ret); - return ret; - } - } - return 0; } @@ -1772,7 +1737,6 @@ static int eqos_probe_resources_stm32(struct udevice *dev) struct eqos_priv *eqos = dev_get_priv(dev); int ret; phy_interface_t interface; - struct ofnode_phandle_args phandle_args; debug("%s(dev=%p):\n", __func__, dev); @@ -1812,20 +1776,6 @@ static int eqos_probe_resources_stm32(struct udevice *dev) if (ret) pr_warn("No phy clock provided %d", ret); - ret = dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0, - &phandle_args); - if (!ret) { - /* search "reset-gpios" in phy node */ - ret = gpio_request_by_name_nodev(phandle_args.node, - "reset-gpios", 0, - &eqos->phy_reset_gpio, - GPIOD_IS_OUT | - GPIOD_IS_OUT_ACTIVE); - if (ret) - pr_warn("gpio_request_by_name(phy reset) not provided %d", - ret); - } - debug("%s: OK\n", __func__); return 0;