From: Stefan Agner <stefan.agner@toradex.com>
Date: Thu, 15 Sep 2016 22:04:39 +0000 (-0700)
Subject: imx: mx6: fix USB bmode to use reserved value
X-Git-Tag: v2025.01-rc5-pxa1908~8335^2~21
X-Git-Url: http://git.dujemihanovic.xyz/html/static/gitweb.css?a=commitdiff_plain;h=81c4eccb55ccbe4a7bb4016b23738c3c57dc364d;p=u-boot.git

imx: mx6: fix USB bmode to use reserved value

Currently the bmode "usb" uses BOOT_CFG1 to 0x01, -which means
BOOT_CFG1[7:4] is set to b0000. According to Table 8-7 Boot
Device Selection this is NOR/OneNAND and not Reserved.

Use 0x10 which leads to b0001, which is a Reserved boot device.
With that the SoC reliably falls back to the serial loader.

Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Tested-by: Troy Kisky <troy.kisky@boundarydevices.com>
---

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index bc3e634bb5..09f2b0254a 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -514,7 +514,7 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
 const struct boot_mode soc_boot_modes[] = {
 	{"normal",	MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
 	/* reserved value should start rom usb */
-	{"usb",		MAKE_CFGVAL(0x01, 0x00, 0x00, 0x00)},
+	{"usb",		MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)},
 	{"sata",	MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)},
 	{"ecspi1:0",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)},
 	{"ecspi1:1",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)},