From: Nishanth Menon Date: Wed, 5 Jun 2024 15:27:52 +0000 (-0500) Subject: arm: dts: am62a7_sk: Switch to OF_UPSTREAM X-Git-Url: http://git.dujemihanovic.xyz/html/static/gitweb.css?a=commitdiff_plain;h=6a76668d29c1497a0ccd48b0bf9a1df370f50d2b;p=u-boot.git arm: dts: am62a7_sk: Switch to OF_UPSTREAM Enable OF_UPSTREAM for am62a7-sk board. Remove DT files that are now available in dts/upstream. Update the appended files based on version of latest OF_UPSTREAM sync point (v6.10-rc1). Signed-off-by: Nishanth Menon Reviewed-by: Bryan Brattlof Reviewed-by: Dhruva Gole --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 5b0bcf3369..27f38908f2 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1203,8 +1203,7 @@ dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-r5-sk.dtb \ k3-am625-verdin-r5.dtb \ k3-am625-r5-phycore-som-2gb.dtb -dtb-$(CONFIG_SOC_K3_AM62A7) += k3-am62a7-sk.dtb \ - k3-am62a7-r5-sk.dtb +dtb-$(CONFIG_SOC_K3_AM62A7) += k3-am62a7-r5-sk.dtb dtb-$(CONFIG_SOC_K3_AM62P5) += k3-am62p5-r5-sk.dtb diff --git a/arch/arm/dts/k3-am62a-main.dtsi b/arch/arm/dts/k3-am62a-main.dtsi deleted file mode 100644 index aa1e057082..0000000000 --- a/arch/arm/dts/k3-am62a-main.dtsi +++ /dev/null @@ -1,1054 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT -/* - * Device Tree Source for AM62A SoC Family Main Domain peripherals - * - * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ - */ - -&cbass_main { - oc_sram: sram@70000000 { - compatible = "mmio-sram"; - reg = <0x00 0x70000000 0x00 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x00 0x70000000 0x10000>; - }; - - gic500: interrupt-controller@1800000 { - compatible = "arm,gic-v3"; - reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ - <0x00 0x01880000 0x00 0xc0000>, /* GICR */ - <0x00 0x01880000 0x00 0xc0000>, /* GICR */ - <0x01 0x00000000 0x00 0x2000>, /* GICC */ - <0x01 0x00010000 0x00 0x1000>, /* GICH */ - <0x01 0x00020000 0x00 0x2000>; /* GICV */ - #address-cells = <2>; - #size-cells = <2>; - ranges; - #interrupt-cells = <3>; - interrupt-controller; - /* - * vcpumntirq: - * virtual CPU interface maintenance interrupt - */ - interrupts = ; - - gic_its: msi-controller@1820000 { - compatible = "arm,gic-v3-its"; - reg = <0x00 0x01820000 0x00 0x10000>; - socionext,synquacer-pre-its = <0x1000000 0x400000>; - msi-controller; - #msi-cells = <1>; - }; - }; - - main_conf: bus@100000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x00 0x00100000 0x20000>; - - phy_gmii_sel: phy@4044 { - compatible = "ti,am654-phy-gmii-sel"; - reg = <0x4044 0x8>; - #phy-cells = <1>; - }; - - epwm_tbclk: clock-controller@4130 { - compatible = "ti,am62-epwm-tbclk"; - reg = <0x4130 0x4>; - #clock-cells = <1>; - }; - }; - - dmss: bus@48000000 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - dma-ranges; - ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06000000>; - - ti,sci-dev-id = <25>; - - secure_proxy_main: mailbox@4d000000 { - compatible = "ti,am654-secure-proxy"; - reg = <0x00 0x4d000000 0x00 0x80000>, - <0x00 0x4a600000 0x00 0x80000>, - <0x00 0x4a400000 0x00 0x80000>; - reg-names = "target_data", "rt", "scfg"; - #mbox-cells = <1>; - interrupt-names = "rx_012"; - interrupts = ; - }; - - inta_main_dmss: interrupt-controller@48000000 { - compatible = "ti,sci-inta"; - reg = <0x00 0x48000000 0x00 0x100000>; - #interrupt-cells = <0>; - interrupt-controller; - interrupt-parent = <&gic500>; - msi-controller; - ti,sci = <&dmsc>; - ti,sci-dev-id = <28>; - ti,interrupt-ranges = <6 70 34>; - ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>; - }; - - main_bcdma: dma-controller@485c0100 { - compatible = "ti,am64-dmss-bcdma"; - reg = <0x00 0x485c0100 0x00 0x100>, - <0x00 0x4c000000 0x00 0x20000>, - <0x00 0x4a820000 0x00 0x20000>, - <0x00 0x4aa40000 0x00 0x20000>, - <0x00 0x4bc00000 0x00 0x100000>, - <0x00 0x48600000 0x00 0x8000>, - <0x00 0x484a4000 0x00 0x2000>, - <0x00 0x484c2000 0x00 0x2000>, - <0x00 0x48420000 0x00 0x2000>; - reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt", - "ring", "tchan", "rchan", "bchan"; - msi-parent = <&inta_main_dmss>; - #dma-cells = <3>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <26>; - ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */ - ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */ - ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */ - }; - - main_pktdma: dma-controller@485c0000 { - compatible = "ti,am64-dmss-pktdma"; - reg = <0x00 0x485c0000 0x00 0x100>, - <0x00 0x4a800000 0x00 0x20000>, - <0x00 0x4aa00000 0x00 0x40000>, - <0x00 0x4b800000 0x00 0x400000>, - <0x00 0x485e0000 0x00 0x10000>, - <0x00 0x484a0000 0x00 0x2000>, - <0x00 0x484c0000 0x00 0x2000>, - <0x00 0x48430000 0x00 0x1000>; - reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt", - "ring", "tchan", "rchan", "rflow"; - msi-parent = <&inta_main_dmss>; - #dma-cells = <2>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <30>; - ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */ - <0x24>, /* CPSW_TX_CHAN */ - <0x25>, /* SAUL_TX_0_CHAN */ - <0x26>; /* SAUL_TX_1_CHAN */ - ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */ - <0x11>, /* RING_CPSW_TX_CHAN */ - <0x12>, /* RING_SAUL_TX_0_CHAN */ - <0x13>; /* RING_SAUL_TX_1_CHAN */ - ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */ - <0x2b>, /* CPSW_RX_CHAN */ - <0x2d>, /* SAUL_RX_0_CHAN */ - <0x2f>, /* SAUL_RX_1_CHAN */ - <0x31>, /* SAUL_RX_2_CHAN */ - <0x33>; /* SAUL_RX_3_CHAN */ - ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */ - <0x2c>, /* FLOW_CPSW_RX_CHAN */ - <0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */ - <0x32>; /* FLOW_SAUL_RX_2/3_CHAN */ - }; - }; - - dmss_csi: bus@4e000000 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - dma-ranges; - ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x300000>; - - ti,sci-dev-id = <198>; - - inta_main_dmss_csi: interrupt-controller@4e0a0000 { - compatible = "ti,sci-inta"; - reg = <0x00 0x4e0a0000 0x00 0x8000>; - #interrupt-cells = <0>; - interrupt-controller; - interrupt-parent = <&gic500>; - msi-controller; - ti,sci = <&dmsc>; - ti,sci-dev-id = <200>; - ti,interrupt-ranges = <0 237 8>; - ti,unmapped-event-sources = <&main_bcdma_csi>; - power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; - }; - - main_bcdma_csi: dma-controller@4e230000 { - compatible = "ti,am62a-dmss-bcdma-csirx"; - reg = <0x00 0x4e230000 0x00 0x100>, - <0x00 0x4e180000 0x00 0x8000>, - <0x00 0x4e100000 0x00 0x10000>; - reg-names = "gcfg", "rchanrt", "ringrt"; - msi-parent = <&inta_main_dmss_csi>; - #dma-cells = <3>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <199>; - ti,sci-rm-range-rchan = <0x21>; - power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; - }; - }; - - dmsc: system-controller@44043000 { - compatible = "ti,k2g-sci"; - reg = <0x00 0x44043000 0x00 0xfe0>; - reg-names = "debug_messages"; - ti,host-id = <12>; - mbox-names = "rx", "tx"; - mboxes = <&secure_proxy_main 12>, - <&secure_proxy_main 13>; - - k3_pds: power-controller { - compatible = "ti,sci-pm-domain"; - #power-domain-cells = <2>; - }; - - k3_clks: clock-controller { - compatible = "ti,k2g-sci-clk"; - #clock-cells = <2>; - }; - - k3_reset: reset-controller { - compatible = "ti,sci-reset"; - #reset-cells = <2>; - }; - }; - - secure_proxy_sa3: mailbox@43600000 { - compatible = "ti,am654-secure-proxy"; - #mbox-cells = <1>; - reg-names = "target_data", "rt", "scfg"; - reg = <0x00 0x43600000 0x00 0x10000>, - <0x00 0x44880000 0x00 0x20000>, - <0x00 0x44860000 0x00 0x20000>; - /* - * Marked Disabled: - * Node is incomplete as it is meant for bootloaders and - * firmware on non-MPU processors - */ - status = "disabled"; - }; - - main_pmx0: pinctrl@f4000 { - compatible = "pinctrl-single"; - reg = <0x00 0xf4000 0x00 0x2ac>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0xffffffff>; - }; - - main_timer0: timer@2400000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2400000 0x00 0x400>; - interrupts = ; - clocks = <&k3_clks 36 2>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 36 2>; - assigned-clock-parents = <&k3_clks 36 3>; - power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer1: timer@2410000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2410000 0x00 0x400>; - interrupts = ; - clocks = <&k3_clks 37 2>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 37 2>; - assigned-clock-parents = <&k3_clks 37 3>; - power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer2: timer@2420000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2420000 0x00 0x400>; - interrupts = ; - clocks = <&k3_clks 38 2>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 38 2>; - assigned-clock-parents = <&k3_clks 38 3>; - power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer3: timer@2430000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2430000 0x00 0x400>; - interrupts = ; - clocks = <&k3_clks 39 2>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 39 2>; - assigned-clock-parents = <&k3_clks 39 3>; - power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer4: timer@2440000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2440000 0x00 0x400>; - interrupts = ; - clocks = <&k3_clks 40 2>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 40 2>; - assigned-clock-parents = <&k3_clks 40 3>; - power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer5: timer@2450000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2450000 0x00 0x400>; - interrupts = ; - clocks = <&k3_clks 41 2>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 41 2>; - assigned-clock-parents = <&k3_clks 41 3>; - power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer6: timer@2460000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2460000 0x00 0x400>; - interrupts = ; - clocks = <&k3_clks 42 2>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 42 2>; - assigned-clock-parents = <&k3_clks 42 3>; - power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_timer7: timer@2470000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x2470000 0x00 0x400>; - interrupts = ; - clocks = <&k3_clks 43 2>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 43 2>; - assigned-clock-parents = <&k3_clks 43 3>; - power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - }; - - main_uart0: serial@2800000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02800000 0x00 0x100>; - interrupts = ; - power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 146 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart1: serial@2810000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02810000 0x00 0x100>; - interrupts = ; - power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 152 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart2: serial@2820000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02820000 0x00 0x100>; - interrupts = ; - power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 153 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart3: serial@2830000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02830000 0x00 0x100>; - interrupts = ; - power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 154 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart4: serial@2840000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02840000 0x00 0x100>; - interrupts = ; - power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 155 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart5: serial@2850000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02850000 0x00 0x100>; - interrupts = ; - power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 156 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_uart6: serial@2860000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x02860000 0x00 0x100>; - interrupts = ; - power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 158 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - main_i2c0: i2c@20000000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x20000000 0x00 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 102 2>; - clock-names = "fck"; - status = "disabled"; - }; - - main_i2c1: i2c@20010000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x20010000 0x00 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 103 2>; - clock-names = "fck"; - status = "disabled"; - }; - - main_i2c2: i2c@20020000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x20020000 0x00 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 104 2>; - clock-names = "fck"; - status = "disabled"; - }; - - main_i2c3: i2c@20030000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x20030000 0x00 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 105 2>; - clock-names = "fck"; - status = "disabled"; - }; - - main_spi0: spi@20100000 { - compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; - reg = <0x00 0x20100000 0x00 0x400>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 141 0>; - status = "disabled"; - }; - - main_spi1: spi@20110000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x00 0x20110000 0x00 0x400>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 142 0>; - status = "disabled"; - }; - - main_spi2: spi@20120000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x00 0x20120000 0x00 0x400>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 143 0>; - status = "disabled"; - }; - - main_gpio_intr: interrupt-controller@a00000 { - compatible = "ti,sci-intr"; - reg = <0x00 0x00a00000 0x00 0x800>; - ti,intr-trigger-type = <1>; - interrupt-controller; - interrupt-parent = <&gic500>; - #interrupt-cells = <1>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <3>; - ti,interrupt-ranges = <0 32 16>; - status = "disabled"; - }; - - main_gpio0: gpio@600000 { - compatible = "ti,am64-gpio", "ti,keystone-gpio"; - reg = <0x00 0x00600000 0x0 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&main_gpio_intr>; - interrupts = <190>, <191>, <192>, - <193>, <194>, <195>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <92>; - ti,davinci-gpio-unbanked = <0>; - power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 77 0>; - clock-names = "gpio"; - status = "disabled"; - }; - - main_gpio1: gpio@601000 { - compatible = "ti,am64-gpio", "ti,keystone-gpio"; - reg = <0x00 0x00601000 0x0 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&main_gpio_intr>; - interrupts = <180>, <181>, <182>, - <183>, <184>, <185>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <52>; - ti,davinci-gpio-unbanked = <0>; - power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 78 0>; - clock-names = "gpio"; - status = "disabled"; - }; - - sdhci0: mmc@fa10000 { - compatible = "ti,am62-sdhci"; - reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>; - interrupts = ; - power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 57 5>, <&k3_clks 57 6>; - clock-names = "clk_ahb", "clk_xin"; - assigned-clocks = <&k3_clks 57 6>; - assigned-clock-parents = <&k3_clks 57 8>; - bus-width = <8>; - mmc-hs200-1_8v; - ti,clkbuf-sel = <0x7>; - ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-mmc-hs = <0x0>; - ti,otap-del-sel-hs200 = <0x6>; - status = "disabled"; - }; - - sdhci1: mmc@fa00000 { - compatible = "ti,am62-sdhci"; - reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>; - interrupts = ; - power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 58 5>, <&k3_clks 58 6>; - clock-names = "clk_ahb", "clk_xin"; - bus-width = <4>; - ti,clkbuf-sel = <0x7>; - ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-sd-hs = <0x0>; - ti,otap-del-sel-sdr12 = <0xf>; - ti,otap-del-sel-sdr25 = <0xf>; - ti,otap-del-sel-sdr50 = <0xc>; - ti,otap-del-sel-sdr104 = <0x6>; - ti,otap-del-sel-ddr50 = <0x9>; - ti,itap-del-sel-legacy = <0x0>; - ti,itap-del-sel-sd-hs = <0x0>; - ti,itap-del-sel-sdr12 = <0x0>; - ti,itap-del-sel-sdr25 = <0x0>; - no-1-8-v; - status = "disabled"; - }; - - sdhci2: mmc@fa20000 { - compatible = "ti,am62-sdhci"; - reg = <0x00 0xfa20000 0x00 0x260>, <0x00 0xfa28000 0x00 0x134>; - interrupts = ; - power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 184 5>, <&k3_clks 184 6>; - clock-names = "clk_ahb", "clk_xin"; - bus-width = <4>; - ti,clkbuf-sel = <0x7>; - ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-sd-hs = <0x0>; - ti,otap-del-sel-sdr12 = <0xf>; - ti,otap-del-sel-sdr25 = <0xf>; - ti,otap-del-sel-sdr50 = <0xc>; - ti,otap-del-sel-sdr104 = <0x6>; - ti,otap-del-sel-ddr50 = <0x9>; - ti,itap-del-sel-legacy = <0x0>; - ti,itap-del-sel-sd-hs = <0x0>; - ti,itap-del-sel-sdr12 = <0x0>; - ti,itap-del-sel-sdr25 = <0x0>; - no-1-8-v; - status = "disabled"; - }; - - usbss0: dwc3-usb@f900000 { - compatible = "ti,am62-usb"; - reg = <0x00 0x0f900000 0x00 0x800>; - clocks = <&k3_clks 161 3>; - clock-names = "ref"; - ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>; - #address-cells = <2>; - #size-cells = <2>; - power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>; - ranges; - status = "disabled"; - - usb0: usb@31000000 { - compatible = "snps,dwc3"; - reg = <0x00 0x31000000 0x00 0x50000>; - interrupts = , /* irq.0 */ - ; /* irq.0 */ - interrupt-names = "host", "peripheral"; - maximum-speed = "high-speed"; - dr_mode = "otg"; - }; - }; - - usbss1: dwc3-usb@f910000 { - compatible = "ti,am62-usb"; - reg = <0x00 0x0f910000 0x00 0x800>; - clocks = <&k3_clks 162 3>; - clock-names = "ref"; - ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>; - #address-cells = <2>; - #size-cells = <2>; - power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>; - ranges; - status = "disabled"; - - usb1: usb@31100000 { - compatible = "snps,dwc3"; - reg = <0x00 0x31100000 0x00 0x50000>; - interrupts = , /* irq.0 */ - ; /* irq.0 */ - interrupt-names = "host", "peripheral"; - maximum-speed = "high-speed"; - dr_mode = "otg"; - }; - }; - - fss: bus@fc00000 { - compatible = "simple-bus"; - reg = <0x00 0x0fc00000 0x00 0x70000>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - status = "disabled"; - - ospi0: spi@fc40000 { - compatible = "ti,am654-ospi", "cdns,qspi-nor"; - reg = <0x00 0x0fc40000 0x00 0x100>, - <0x05 0x00000000 0x01 0x00000000>; - interrupts = ; - cdns,fifo-depth = <256>; - cdns,fifo-width = <4>; - cdns,trigger-address = <0x0>; - clocks = <&k3_clks 75 7>; - assigned-clocks = <&k3_clks 75 7>; - assigned-clock-parents = <&k3_clks 75 8>; - assigned-clock-rates = <166666666>; - power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - cpsw3g: ethernet@8000000 { - compatible = "ti,am642-cpsw-nuss"; - #address-cells = <2>; - #size-cells = <2>; - reg = <0x0 0x8000000 0x0 0x200000>; - reg-names = "cpsw_nuss"; - ranges = <0x0 0x0 0x0 0x8000000 0x0 0x200000>; - clocks = <&k3_clks 13 0>; - assigned-clocks = <&k3_clks 13 3>; - assigned-clock-parents = <&k3_clks 13 11>; - clock-names = "fck"; - power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - - dmas = <&main_pktdma 0xc600 15>, - <&main_pktdma 0xc601 15>, - <&main_pktdma 0xc602 15>, - <&main_pktdma 0xc603 15>, - <&main_pktdma 0xc604 15>, - <&main_pktdma 0xc605 15>, - <&main_pktdma 0xc606 15>, - <&main_pktdma 0xc607 15>, - <&main_pktdma 0x4600 15>; - dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", - "tx7", "rx"; - - ethernet-ports { - #address-cells = <1>; - #size-cells = <0>; - - cpsw_port1: port@1 { - reg = <1>; - ti,mac-only; - label = "port1"; - phys = <&phy_gmii_sel 1>; - mac-address = [00 00 00 00 00 00]; - ti,syscon-efuse = <&wkup_conf 0x200>; - }; - - cpsw_port2: port@2 { - reg = <2>; - ti,mac-only; - label = "port2"; - phys = <&phy_gmii_sel 2>; - mac-address = [00 00 00 00 00 00]; - }; - }; - - cpsw3g_mdio: mdio@f00 { - compatible = "ti,cpsw-mdio","ti,davinci_mdio"; - reg = <0x0 0xf00 0x0 0x100>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&k3_clks 13 0>; - clock-names = "fck"; - bus_freq = <1000000>; - }; - - cpts@3d000 { - compatible = "ti,j721e-cpts"; - reg = <0x0 0x3d000 0x0 0x400>; - clocks = <&k3_clks 13 3>; - clock-names = "cpts"; - interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "cpts"; - ti,cpts-ext-ts-inputs = <4>; - ti,cpts-periodic-outputs = <2>; - }; - }; - - hwspinlock: spinlock@2a000000 { - compatible = "ti,am64-hwspinlock"; - reg = <0x00 0x2a000000 0x00 0x1000>; - #hwlock-cells = <1>; - }; - - mailbox0_cluster0: mailbox@29000000 { - compatible = "ti,am64-mailbox"; - reg = <0x00 0x29000000 0x00 0x200>; - interrupts = ; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - }; - - mailbox0_cluster1: mailbox@29010000 { - compatible = "ti,am64-mailbox"; - reg = <0x00 0x29010000 0x00 0x200>; - interrupts = ; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - }; - - mailbox0_cluster2: mailbox@29020000 { - compatible = "ti,am64-mailbox"; - reg = <0x00 0x29020000 0x00 0x200>; - interrupts = ; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - }; - - mailbox0_cluster3: mailbox@29030000 { - compatible = "ti,am64-mailbox"; - reg = <0x00 0x29030000 0x00 0x200>; - interrupts = ; - #mbox-cells = <1>; - ti,mbox-num-users = <4>; - ti,mbox-num-fifos = <16>; - }; - - main_mcan0: can@20701000 { - compatible = "bosch,m_can"; - reg = <0x00 0x20701000 0x00 0x200>, - <0x00 0x20708000 0x00 0x8000>; - reg-names = "m_can", "message_ram"; - power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 98 6>, <&k3_clks 98 1>; - clock-names = "hclk", "cclk"; - interrupts = , - ; - interrupt-names = "int0", "int1"; - bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; - status = "disabled"; - }; - - main_rti0: watchdog@e000000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x00 0x0e000000 0x00 0x100>; - clocks = <&k3_clks 125 0>; - power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>; - assigned-clocks = <&k3_clks 125 0>; - assigned-clock-parents = <&k3_clks 125 2>; - }; - - main_rti1: watchdog@e010000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x00 0x0e010000 0x00 0x100>; - clocks = <&k3_clks 126 0>; - power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>; - assigned-clocks = <&k3_clks 126 0>; - assigned-clock-parents = <&k3_clks 126 2>; - }; - - main_rti2: watchdog@e020000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x00 0x0e020000 0x00 0x100>; - clocks = <&k3_clks 127 0>; - power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>; - assigned-clocks = <&k3_clks 127 0>; - assigned-clock-parents = <&k3_clks 127 2>; - }; - - main_rti3: watchdog@e030000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x00 0x0e030000 0x00 0x100>; - clocks = <&k3_clks 128 0>; - power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>; - assigned-clocks = <&k3_clks 128 0>; - assigned-clock-parents = <&k3_clks 128 2>; - }; - - main_rti4: watchdog@e040000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x00 0x0e040000 0x00 0x100>; - clocks = <&k3_clks 205 0>; - power-domains = <&k3_pds 205 TI_SCI_PD_EXCLUSIVE>; - assigned-clocks = <&k3_clks 205 0>; - assigned-clock-parents = <&k3_clks 205 2>; - }; - - epwm0: pwm@23000000 { - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x00 0x23000000 0x00 0x100>; - power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>; - clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - epwm1: pwm@23010000 { - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x00 0x23010000 0x00 0x100>; - power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>; - clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - epwm2: pwm@23020000 { - compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; - #pwm-cells = <3>; - reg = <0x00 0x23020000 0x00 0x100>; - power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>; - clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>; - clock-names = "tbclk", "fck"; - status = "disabled"; - }; - - ecap0: pwm@23100000 { - compatible = "ti,am3352-ecap"; - #pwm-cells = <3>; - reg = <0x00 0x23100000 0x00 0x100>; - power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 51 0>; - clock-names = "fck"; - status = "disabled"; - }; - - ecap1: pwm@23110000 { - compatible = "ti,am3352-ecap"; - #pwm-cells = <3>; - reg = <0x00 0x23110000 0x00 0x100>; - power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 52 0>; - clock-names = "fck"; - status = "disabled"; - }; - - ecap2: pwm@23120000 { - compatible = "ti,am3352-ecap"; - #pwm-cells = <3>; - reg = <0x00 0x23120000 0x00 0x100>; - power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 53 0>; - clock-names = "fck"; - status = "disabled"; - }; - - mcasp0: audio-controller@2b00000 { - compatible = "ti,am33xx-mcasp-audio"; - reg = <0x00 0x02b00000 0x00 0x2000>, - <0x00 0x02b08000 0x00 0x400>; - reg-names = "mpu", "dat"; - interrupts = , - ; - interrupt-names = "tx", "rx"; - - dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>; - dma-names = "tx", "rx"; - - clocks = <&k3_clks 190 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 190 0>; - assigned-clock-parents = <&k3_clks 190 2>; - power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - mcasp1: audio-controller@2b10000 { - compatible = "ti,am33xx-mcasp-audio"; - reg = <0x00 0x02b10000 0x00 0x2000>, - <0x00 0x02b18000 0x00 0x400>; - reg-names = "mpu", "dat"; - interrupts = , - ; - interrupt-names = "tx", "rx"; - - dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>; - dma-names = "tx", "rx"; - - clocks = <&k3_clks 191 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 191 0>; - assigned-clock-parents = <&k3_clks 191 2>; - power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - mcasp2: audio-controller@2b20000 { - compatible = "ti,am33xx-mcasp-audio"; - reg = <0x00 0x02b20000 0x00 0x2000>, - <0x00 0x02b28000 0x00 0x400>; - reg-names = "mpu", "dat"; - interrupts = , - ; - interrupt-names = "tx", "rx"; - - dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>; - dma-names = "tx", "rx"; - - clocks = <&k3_clks 192 0>; - clock-names = "fck"; - assigned-clocks = <&k3_clks 192 0>; - assigned-clock-parents = <&k3_clks 192 2>; - power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - ti_csi2rx0: ticsi2rx@30102000 { - compatible = "ti,j721e-csi2rx-shim"; - dmas = <&main_bcdma_csi 0 0x5000 0>; - dma-names = "rx0"; - reg = <0x00 0x30102000 0x00 0x1000>; - power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - status = "disabled"; - - cdns_csi2rx0: csi-bridge@30101000 { - compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; - reg = <0x00 0x30101000 0x00 0x1000>; - clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>, - <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>; - clock-names = "sys_clk", "p_clk", "pixel_if0_clk", - "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; - phys = <&dphy0>; - phy-names = "dphy"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - csi0_port0: port@0 { - reg = <0>; - status = "disabled"; - }; - - csi0_port1: port@1 { - reg = <1>; - status = "disabled"; - }; - - csi0_port2: port@2 { - reg = <2>; - status = "disabled"; - }; - - csi0_port3: port@3 { - reg = <3>; - status = "disabled"; - }; - - csi0_port4: port@4 { - reg = <4>; - status = "disabled"; - }; - }; - }; - }; - - dphy0: phy@30110000 { - compatible = "cdns,dphy-rx"; - reg = <0x00 0x30110000 0x00 0x1100>; - #phy-cells = <0>; - power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>; - status = "disabled"; - }; - - dss: dss@30200000 { - compatible = "ti,am62a7-dss"; - reg = <0x00 0x30200000 0x00 0x1000>, /* common */ - <0x00 0x30202000 0x00 0x1000>, /* vidl1 */ - <0x00 0x30206000 0x00 0x1000>, /* vid */ - <0x00 0x30207000 0x00 0x1000>, /* ovr1 */ - <0x00 0x30208000 0x00 0x1000>, /* ovr2 */ - <0x00 0x3020a000 0x00 0x1000>, /* vp1: Tied OFF in the SoC */ - <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */ - <0x00 0x30201000 0x00 0x1000>; /* common1 */ - reg-names = "common", "vidl1", "vid", - "ovr1", "ovr2", "vp1", "vp2", "common1"; - power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 186 6>, - <&k3_clks 186 0>, - <&k3_clks 186 2>; - clock-names = "fck", "vp1", "vp2"; - interrupts = ; - status = "disabled"; - - dss_ports: ports { - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; diff --git a/arch/arm/dts/k3-am62a-mcu.dtsi b/arch/arm/dts/k3-am62a-mcu.dtsi deleted file mode 100644 index 8c36e56f41..0000000000 --- a/arch/arm/dts/k3-am62a-mcu.dtsi +++ /dev/null @@ -1,170 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT -/* - * Device Tree Source for AM625 SoC Family MCU Domain peripherals - * - * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ - */ - -&cbass_mcu { - mcu_pmx0: pinctrl@4084000 { - compatible = "pinctrl-single"; - reg = <0x00 0x04084000 0x00 0x88>; - #pinctrl-cells = <1>; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0xffffffff>; - status = "disabled"; - }; - - /* - * The MCU domain timer interrupts are routed only to the ESM module, - * and not currently available for Linux. The MCU domain timers are - * of limited use without interrupts, and likely reserved by the ESM. - */ - mcu_timer0: timer@4800000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x4800000 0x00 0x400>; - clocks = <&k3_clks 35 2>; - clock-names = "fck"; - power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - status = "reserved"; - }; - - mcu_timer1: timer@4810000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x4810000 0x00 0x400>; - clocks = <&k3_clks 48 2>; - clock-names = "fck"; - power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - status = "reserved"; - }; - - mcu_timer2: timer@4820000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x4820000 0x00 0x400>; - clocks = <&k3_clks 49 2>; - clock-names = "fck"; - power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - status = "reserved"; - }; - - mcu_timer3: timer@4830000 { - compatible = "ti,am654-timer"; - reg = <0x00 0x4830000 0x00 0x400>; - clocks = <&k3_clks 50 2>; - clock-names = "fck"; - power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>; - ti,timer-pwm; - status = "reserved"; - }; - - mcu_uart0: serial@4a00000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x04a00000 0x00 0x100>; - interrupts = ; - power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 149 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - mcu_i2c0: i2c@4900000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x04900000 0x00 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 106 2>; - clock-names = "fck"; - status = "disabled"; - }; - - mcu_spi0: spi@4b00000 { - compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; - reg = <0x00 0x04b00000 0x00 0x400>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 147 0>; - status = "disabled"; - }; - - mcu_spi1: spi@4b10000 { - compatible = "ti,am654-mcspi","ti,omap4-mcspi"; - reg = <0x00 0x04b10000 0x00 0x400>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 148 0>; - status = "disabled"; - }; - - mcu_gpio_intr: interrupt-controller@4210000 { - compatible = "ti,sci-intr"; - reg = <0x00 0x04210000 0x00 0x200>; - ti,intr-trigger-type = <1>; - interrupt-controller; - interrupt-parent = <&gic500>; - #interrupt-cells = <1>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <5>; - ti,interrupt-ranges = <0 104 4>; - }; - - mcu_gpio0: gpio@4201000 { - compatible = "ti,am64-gpio", "ti,keystone-gpio"; - reg = <0x00 0x04201000 0x00 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&mcu_gpio_intr>; - interrupts = <30>, <31>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <24>; - ti,davinci-gpio-unbanked = <0>; - power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 79 0>; - clock-names = "gpio"; - status = "disabled"; - }; - - mcu_rti0: watchdog@4880000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x00 0x04880000 0x00 0x100>; - clocks = <&k3_clks 131 0>; - power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>; - assigned-clocks = <&k3_clks 131 0>; - assigned-clock-parents = <&k3_clks 131 2>; - /* Tightly coupled to M4F */ - status = "reserved"; - }; - - mcu_mcan0: can@4e08000 { - compatible = "bosch,m_can"; - reg = <0x00 0x4e08000 0x00 0x200>, - <0x00 0x4e00000 0x00 0x8000>; - reg-names = "m_can", "message_ram"; - power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 188 6>, <&k3_clks 188 1>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; - status = "disabled"; - }; - - mcu_mcan1: can@4e18000 { - compatible = "bosch,m_can"; - reg = <0x00 0x4e18000 0x00 0x200>, - <0x00 0x4e10000 0x00 0x8000>; - reg-names = "m_can", "message_ram"; - power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 189 6>, <&k3_clks 189 1>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; - status = "disabled"; - }; -}; diff --git a/arch/arm/dts/k3-am62a-sk-binman.dtsi b/arch/arm/dts/k3-am62a-sk-binman.dtsi index ec3bf7ce91..6ccc8b5834 100644 --- a/arch/arm/dts/k3-am62a-sk-binman.dtsi +++ b/arch/arm/dts/k3-am62a-sk-binman.dtsi @@ -144,7 +144,7 @@ #ifdef CONFIG_TARGET_AM62A7_A53_EVM -#define SPL_AM62A7_SK_DTB "spl/dts/k3-am62a7-sk.dtb" +#define SPL_AM62A7_SK_DTB "spl/dts/ti/k3-am62a7-sk.dtb" #define AM62A7_SK_DTB "u-boot.dtb" &binman { diff --git a/arch/arm/dts/k3-am62a-thermal.dtsi b/arch/arm/dts/k3-am62a-thermal.dtsi deleted file mode 100644 index c7486fb2a5..0000000000 --- a/arch/arm/dts/k3-am62a-thermal.dtsi +++ /dev/null @@ -1,50 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT -/* - * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/ - */ - -#include - -thermal_zones: thermal-zones { - main0_thermal: main0-thermal { - polling-delay-passive = <250>; /* milliSeconds */ - polling-delay = <500>; /* milliSeconds */ - thermal-sensors = <&wkup_vtm0 0>; - - trips { - main0_crit: main0-crit { - temperature = <125000>; /* milliCelsius */ - hysteresis = <2000>; /* milliCelsius */ - type = "critical"; - }; - }; - }; - - main1_thermal: main1-thermal { - polling-delay-passive = <250>; /* milliSeconds */ - polling-delay = <500>; /* milliSeconds */ - thermal-sensors = <&wkup_vtm0 1>; - - trips { - main1_crit: main1-crit { - temperature = <125000>; /* milliCelsius */ - hysteresis = <2000>; /* milliCelsius */ - type = "critical"; - }; - }; - }; - - main2_thermal: main2-thermal { - polling-delay-passive = <250>; /* milliSeconds */ - polling-delay = <500>; /* milliSeconds */ - thermal-sensors = <&wkup_vtm0 2>; - - trips { - main2_crit: main2-crit { - temperature = <125000>; /* milliCelsius */ - hysteresis = <2000>; /* milliCelsius */ - type = "critical"; - }; - }; - }; -}; diff --git a/arch/arm/dts/k3-am62a-wakeup.dtsi b/arch/arm/dts/k3-am62a-wakeup.dtsi deleted file mode 100644 index f7bec48470..0000000000 --- a/arch/arm/dts/k3-am62a-wakeup.dtsi +++ /dev/null @@ -1,73 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT -/* - * Device Tree Source for AM62A SoC Family Wakeup Domain peripherals - * - * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ - */ - -&cbass_wakeup { - wkup_conf: syscon@43000000 { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x00 0x43000000 0x00 0x20000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x00 0x43000000 0x20000>; - - chipid: chipid@14 { - compatible = "ti,am654-chipid"; - reg = <0x14 0x4>; - }; - }; - - wkup_uart0: serial@2b300000 { - compatible = "ti,am64-uart", "ti,am654-uart"; - reg = <0x00 0x2b300000 0x00 0x100>; - interrupts = ; - power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 114 0>; - clock-names = "fclk"; - status = "disabled"; - }; - - wkup_i2c0: i2c@2b200000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x2b200000 0x00 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 107 4>; - clock-names = "fck"; - status = "disabled"; - }; - - wkup_rtc0: rtc@2b1f0000 { - compatible = "ti,am62-rtc"; - reg = <0x00 0x2b1f0000 0x00 0x100>; - interrupts = ; - clocks = <&k3_clks 117 6> , <&k3_clks 117 0>; - clock-names = "vbus", "osc32k"; - power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>; - wakeup-source; - status = "disabled"; - }; - - wkup_rti0: watchdog@2b000000 { - compatible = "ti,j7-rti-wdt"; - reg = <0x00 0x2b000000 0x00 0x100>; - clocks = <&k3_clks 132 0>; - power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>; - assigned-clocks = <&k3_clks 132 0>; - assigned-clock-parents = <&k3_clks 132 2>; - /* Used by DM firmware */ - status = "reserved"; - }; - - wkup_vtm0: temperature-sensor@b00000 { - compatible = "ti,j7200-vtm"; - reg = <0x00 0xb00000 0x00 0x400>, - <0x00 0xb01000 0x00 0x400>; - power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>; - #thermal-sensor-cells = <1>; - }; -}; diff --git a/arch/arm/dts/k3-am62a.dtsi b/arch/arm/dts/k3-am62a.dtsi deleted file mode 100644 index b1b8846002..0000000000 --- a/arch/arm/dts/k3-am62a.dtsi +++ /dev/null @@ -1,125 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT -/* - * Device Tree Source for AM62A SoC Family - * - * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ - */ - -#include -#include -#include -#include - -#include "k3-pinctrl.h" - -/ { - model = "Texas Instruments K3 AM62A SoC"; - compatible = "ti,am62a7"; - interrupt-parent = <&gic500>; - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - firmware { - optee { - compatible = "linaro,optee-tz"; - method = "smc"; - }; - - psci: psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - }; - - a53_timer0: timer-cl0-cpu0 { - compatible = "arm,armv8-timer"; - interrupts = , /* cntpsirq */ - , /* cntpnsirq */ - , /* cntvirq */ - ; /* cnthpirq */ - }; - - pmu: pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = ; - }; - - cbass_main: bus@f0000 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - - ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */ - <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */ - <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ - <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */ - <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */ - <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */ - <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */ - <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */ - <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */ - <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */ - <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */ - <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */ - <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */ - <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */ - <0x00 0x30210000 0x00 0x30210000 0x00 0x00010000>, /* VPU */ - <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */ - <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */ - <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */ - <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */ - <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */ - <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */ - <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */ - <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */ - <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */ - <0x00 0x7e000000 0x00 0x7e000000 0x00 0x00100000>, /* C7x_0 */ - <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */ - <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */ - - /* MCU Domain Range */ - <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, - <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */ - <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */ - <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU R5 IRAM0 */ - <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>, /* MCU R5 IRAM1 */ - - /* Wakeup Domain Range */ - <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, - <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, - <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, - <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM */ - <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM */ - - cbass_mcu: bus@4000000 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, /* Peripheral window */ - <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */ - <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */ - <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU IRAM0 */ - <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>; /* MCU IRAM1 */ - }; - - cbass_wakeup: bus@b00000 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */ - <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */ - <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* WKUP CTRL MMR */ - <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/ - <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/ - }; - }; - - #include "k3-am62a-thermal.dtsi" -}; - -/* Now include the peripherals for each bus segments */ -#include "k3-am62a-main.dtsi" -#include "k3-am62a-mcu.dtsi" -#include "k3-am62a-wakeup.dtsi" diff --git a/arch/arm/dts/k3-am62a7-sk.dts b/arch/arm/dts/k3-am62a7-sk.dts deleted file mode 100644 index f241637a56..0000000000 --- a/arch/arm/dts/k3-am62a7-sk.dts +++ /dev/null @@ -1,702 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT -/* - * AM62A SK: https://www.ti.com/lit/zip/sprr459 - * - * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ - */ - -/dts-v1/; - -#include -#include -#include -#include "k3-am62a7.dtsi" - -/ { - compatible = "ti,am62a7-sk", "ti,am62a7"; - model = "Texas Instruments AM62A7 SK"; - - aliases { - serial0 = &wkup_uart0; - serial2 = &main_uart0; - serial3 = &main_uart1; - mmc0 = &sdhci0; - mmc1 = &sdhci1; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - memory@80000000 { - device_type = "memory"; - /* 4G RAM */ - reg = <0x00000000 0x80000000 0x00000000 0x80000000>, - <0x00000008 0x80000000 0x00000000 0x80000000>; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - secure_tfa_ddr: tfa@9e780000 { - reg = <0x00 0x9e780000 0x00 0x80000>; - alignment = <0x1000>; - no-map; - }; - - secure_ddr: optee@9e800000 { - reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ - alignment = <0x1000>; - no-map; - }; - - wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 { - compatible = "shared-dma-pool"; - reg = <0x00 0x9c900000 0x00 0x01e00000>; - no-map; - }; - }; - - vmain_pd: regulator-0 { - /* TPS25750 PD CONTROLLER OUTPUT */ - compatible = "regulator-fixed"; - regulator-name = "vmain_pd"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_5v0: regulator-1 { - /* Output of TPS63070 */ - compatible = "regulator-fixed"; - regulator-name = "vcc_5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vmain_pd>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_3v3_main: regulator-2 { - /* output of LM5141-Q1 */ - compatible = "regulator-fixed"; - regulator-name = "vcc_3v3_main"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vmain_pd>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_mmc1: regulator-3 { - /* TPS22918DBVR */ - compatible = "regulator-fixed"; - regulator-name = "vdd_mmc1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - enable-active-high; - gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; - }; - - vcc_3v3_sys: regulator-4 { - /* output of TPS222965DSGT */ - compatible = "regulator-fixed"; - regulator-name = "vcc_3v3_sys"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_3v3_main>; - regulator-always-on; - regulator-boot-on; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&usr_led_pins_default>; - - led-0 { - label = "am62a-sk:green:heartbeat"; - gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - function = LED_FUNCTION_HEARTBEAT; - default-state = "off"; - }; - }; - - tlv320_mclk: clk-0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <12288000>; - }; - - hdmi0: connector-hdmi { - compatible = "hdmi-connector"; - label = "hdmi"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&sii9022_out>; - }; - }; - }; - - codec_audio: sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "AM62Ax-SKEVM"; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Line", "Line In", - "Microphone", "Microphone Jack"; - simple-audio-card,routing = - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT", - "LINE1L", "Line In", - "LINE1R", "Line In", - "MIC3R", "Microphone Jack", - "Microphone Jack", "Mic Bias"; - simple-audio-card,format = "dsp_b"; - simple-audio-card,bitclock-master = <&sound_master>; - simple-audio-card,frame-master = <&sound_master>; - simple-audio-card,bitclock-inversion; - - simple-audio-card,cpu { - sound-dai = <&mcasp1>; - }; - - sound_master: simple-audio-card,codec { - sound-dai = <&tlv320aic3106>; - clocks = <&tlv320_mclk>; - }; - }; -}; - -&mcu_pmx0 { - wkup_uart0_pins_default: wkup-uart0-default-pins { - pinctrl-single,pins = < - AM62AX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */ - AM62AX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */ - AM62AX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */ - AM62AX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */ - >; - }; -}; - -/* WKUP UART0 is used for DM firmware logs */ -&wkup_uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&wkup_uart0_pins_default>; - status = "reserved"; -}; - -&main_pmx0 { - main_dss0_pins_default: main-dss0-default-pins { - pinctrl-single,pins = < - AM62AX_IOPAD(0x100, PIN_OUTPUT, 0) /* (V17) VOUT0_VSYNC */ - AM62AX_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (T18) VOUT0_HSYNC */ - AM62AX_IOPAD(0x104, PIN_OUTPUT, 0) /* (AA22) VOUT0_PCLK */ - AM62AX_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (U17) VOUT0_DE */ - AM62AX_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */ - AM62AX_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (U21) VOUT0_DATA1 */ - AM62AX_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (U20) VOUT0_DATA2 */ - AM62AX_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (U19) VOUT0_DATA3 */ - AM62AX_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (T19) VOUT0_DATA4 */ - AM62AX_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (U18) VOUT0_DATA5 */ - AM62AX_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (V22) VOUT0_DATA6 */ - AM62AX_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA7 */ - AM62AX_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V19) VOUT0_DATA8 */ - AM62AX_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (V18) VOUT0_DATA9 */ - AM62AX_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (W22) VOUT0_DATA10 */ - AM62AX_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA11 */ - AM62AX_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (W20) VOUT0_DATA12 */ - AM62AX_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (W19) VOUT0_DATA13 */ - AM62AX_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y21) VOUT0_DATA14 */ - AM62AX_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA15 */ - AM62AX_IOPAD(0x05c, PIN_OUTPUT, 1) /* (P22) GPMC0_AD8.VOUT0_DATA16 */ - AM62AX_IOPAD(0x060, PIN_OUTPUT, 1) /* (R19) GPMC0_AD9.VOUT0_DATA17 */ - AM62AX_IOPAD(0x064, PIN_OUTPUT, 1) /* (R20) GPMC0_AD10.VOUT0_DATA18 */ - AM62AX_IOPAD(0x068, PIN_OUTPUT, 1) /* (R22) GPMC0_AD11.VOUT0_DATA19 */ - AM62AX_IOPAD(0x06c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */ - AM62AX_IOPAD(0x070, PIN_OUTPUT, 1) /* (R21) GPMC0_AD13.VOUT0_DATA21 */ - AM62AX_IOPAD(0x074, PIN_OUTPUT, 1) /* (T20) GPMC0_AD14.VOUT0_DATA22 */ - AM62AX_IOPAD(0x078, PIN_OUTPUT, 1) /* (T21) GPMC0_AD15.VOUT0_DATA23 */ - >; - }; - - main_uart0_pins_default: main-uart0-default-pins { - pinctrl-single,pins = < - AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */ - AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */ - >; - }; - - main_uart1_pins_default: main-uart1-default-pins { - pinctrl-single,pins = < - AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */ - AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */ - AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */ - AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */ - >; - }; - - main_i2c0_pins_default: main-i2c0-default-pins { - pinctrl-single,pins = < - AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ - AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ - >; - }; - - main_i2c1_pins_default: main-i2c1-default-pins { - pinctrl-single,pins = < - AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ - AM62AX_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ - >; - }; - - main_i2c2_pins_default: main-i2c2-default-pins { - pinctrl-single,pins = < - AM62AX_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ - AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ - >; - }; - - main_mmc0_pins_default: main-mmc0-default-pins { - pinctrl-single,pins = < - AM62AX_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ - AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLKLB */ - AM62AX_IOPAD(0x21c, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ - AM62AX_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ - AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */ - AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */ - AM62AX_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */ - AM62AX_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */ - AM62AX_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */ - AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */ - AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */ - >; - }; - - main_mmc1_pins_default: main-mmc1-default-pins { - pinctrl-single,pins = < - AM62AX_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ - AM62AX_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ - AM62AX_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */ - AM62AX_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */ - AM62AX_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */ - AM62AX_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ - AM62AX_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */ - >; - }; - - usr_led_pins_default: usr-led-default-pins { - pinctrl-single,pins = < - AM62AX_IOPAD(0x244, PIN_OUTPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */ - >; - }; - - main_usb1_pins_default: main-usb1-default-pins { - pinctrl-single,pins = < - AM62AX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ - >; - }; - - main_mdio1_pins_default: main-mdio1-default-pins { - pinctrl-single,pins = < - AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */ - AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */ - >; - }; - - main_rgmii1_pins_default: main-rgmii1-default-pins { - pinctrl-single,pins = < - AM62AX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */ - AM62AX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */ - AM62AX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */ - AM62AX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */ - AM62AX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */ - AM62AX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */ - AM62AX_IOPAD(0x134, PIN_INPUT, 0) /* (Y17) RGMII1_TD0 */ - AM62AX_IOPAD(0x138, PIN_INPUT, 0) /* (V16) RGMII1_TD1 */ - AM62AX_IOPAD(0x13c, PIN_INPUT, 0) /* (Y16) RGMII1_TD2 */ - AM62AX_IOPAD(0x140, PIN_INPUT, 0) /* (AA17) RGMII1_TD3 */ - AM62AX_IOPAD(0x130, PIN_INPUT, 0) /* (AB17) RGMII1_TXC */ - AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */ - >; - }; - - main_mcasp1_pins_default: main-mcasp1-default-pins { - pinctrl-single,pins = < - AM62AX_IOPAD(0x090, PIN_INPUT, 2) /* (L19) GPMC0_BE0n_CLE.MCASP1_ACLKX */ - AM62AX_IOPAD(0x098, PIN_INPUT, 2) /* (R18) GPMC0_WAIT0.MCASP1_AFSX */ - AM62AX_IOPAD(0x08c, PIN_OUTPUT, 2) /* (K19) GPMC0_WEn.MCASP1_AXR0 */ - AM62AX_IOPAD(0x084, PIN_INPUT, 2) /* (L18) GPMC0_ADVn_ALE.MCASP1_AXR2 */ - >; - }; - - main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins { - pinctrl-single,pins = < - AM62AX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */ - >; - }; -}; - -&mcu_pmx0 { - status = "okay"; - - pmic_irq_pins_default: pmic-irq-default-pins { - pinctrl-single,pins = < - AM62AX_MCU_IOPAD(0x000, PIN_INPUT, 7) /* (E11) MCU_GPIO0_0 */ - >; - }; -}; - -&mcu_gpio0 { - status = "okay"; -}; - -&main_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c0_pins_default>; - clock-frequency = <400000>; - - typec_pd0: usb-power-controller@3f { - compatible = "ti,tps6598x"; - reg = <0x3f>; - - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - self-powered; - data-role = "dual"; - power-role = "sink"; - port { - usb_con_hs: endpoint { - remote-endpoint = <&usb0_hs_ep>; - }; - }; - }; - }; - - tps659312: pmic@48 { - compatible = "ti,tps6593-q1"; - reg = <0x48>; - ti,primary-pmic; - system-power-controller; - - gpio-controller; - #gpio-cells = <2>; - - pinctrl-names = "default"; - pinctrl-0 = <&pmic_irq_pins_default>; - interrupt-parent = <&mcu_gpio0>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - - buck123-supply = <&vcc_3v3_sys>; - buck4-supply = <&vcc_3v3_sys>; - buck5-supply = <&vcc_3v3_sys>; - ldo1-supply = <&vcc_3v3_sys>; - ldo2-supply = <&vcc_3v3_sys>; - ldo3-supply = <&buck5>; - ldo4-supply = <&vcc_3v3_sys>; - - regulators { - buck123: buck123 { - regulator-name = "vcc_core"; - regulator-min-microvolt = <715000>; - regulator-max-microvolt = <895000>; - regulator-boot-on; - regulator-always-on; - }; - - buck4: buck4 { - regulator-name = "vcc_1v1"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-boot-on; - regulator-always-on; - }; - - buck5: buck5 { - regulator-name = "vcc_1v8_sys"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo1: ldo1 { - regulator-name = "vddshv5_sdio"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2: ldo2 { - regulator-name = "vpp_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3: ldo3 { - regulator-name = "vcc_0v85"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4: ldo4 { - regulator-name = "vdda_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; -}; - -&main_i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c1_pins_default>; - clock-frequency = <100000>; - - exp1: gpio@22 { - compatible = "ti,tca6424"; - reg = <0x22>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&main_gpio1>; - interrupts = <23 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; - - gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", - "BT_EN_SOC", "MMC1_SD_EN", - "VPP_EN", "EXP_PS_3V3_En", - "EXP_PS_5V0_En", "EXP_HAT_DETECT", - "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn", - "UART1_FET_BUF_EN", "BT_UART_WAKE_SOC", - "GPIO_HDMI_RSTn", "CSI_GPIO0", - "CSI_GPIO1", "WLAN_ALERTn", - "HDMI_INTn", "TEST_GPIO2", - "MCASP1_FET_EN", "MCASP1_BUF_BT_EN", - "MCASP1_FET_SEL", "UART1_FET_SEL", - "PD_I2C_IRQ", "IO_EXP_TEST_LED"; - }; - - tlv320aic3106: audio-codec@1b { - #sound-dai-cells = <0>; - compatible = "ti,tlv320aic3106"; - reg = <0x1b>; - ai3x-micbias-vg = <1>; /* 2.0V */ - - /* Regulators */ - AVDD-supply = <&vcc_3v3_sys>; - IOVDD-supply = <&vcc_3v3_sys>; - DRVDD-supply = <&vcc_3v3_sys>; - DVDD-supply = <&buck5>; - }; - - exp2: gpio@23 { - compatible = "ti,tca6424"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = "", "", - "", "", - "", "", - "", "", - "WL_LT_EN", "CSI_RSTz", - "", "", - "", "", - "", "", - "SPI0_FET_SEL", "SPI0_FET_OE", - "RGMII2_BRD_CONN_DET", "CSI_SEL2", - "CSI_EN", "AUTO_100M_1000M_CONFIG", - "CSI_VLDO_SEL", "SoC_WLAN_SDIO_RST"; - }; - - sii9022: bridge-hdmi@3b { - compatible = "sil,sii9022"; - reg = <0x3b>; - interrupt-parent = <&exp1>; - interrupts = <16 IRQ_TYPE_EDGE_FALLING>; - #sound-dai-cells = <0>; - sil,i2s-data-lanes = < 0 >; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - sii9022_in: endpoint { - remote-endpoint = <&dpi1_out>; - }; - }; - - port@1 { - reg = <1>; - - sii9022_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; -}; - -&main_i2c2 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c2_pins_default>; - clock-frequency = <400000>; -}; - -&sdhci0 { - /* eMMC */ - status = "okay"; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc0_pins_default>; - disable-wp; -}; - -&sdhci1 { - /* SD/MMC */ - status = "okay"; - vmmc-supply = <&vdd_mmc1>; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc1_pins_default>; - disable-wp; -}; - -&main_gpio0 { - status = "okay"; -}; - -&main_gpio1 { - status = "okay"; -}; - -&main_gpio_intr { - status = "okay"; -}; - -&main_uart0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_uart0_pins_default>; -}; - -/* Main UART1 is used for TIFS firmware logs */ -&main_uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&main_uart1_pins_default>; - status = "reserved"; -}; - -&usbss0 { - status = "okay"; - ti,vbus-divider; -}; - -&usb0 { - usb-role-switch; - - port { - usb0_hs_ep: endpoint { - remote-endpoint = <&usb_con_hs>; - }; - }; -}; - -&usbss1 { - status = "okay"; -}; - -&usb1 { - dr_mode = "host"; - pinctrl-names = "default"; - pinctrl-0 = <&main_usb1_pins_default>; -}; - -&cpsw3g { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_rgmii1_pins_default>; -}; - -&cpsw_port1 { - status = "okay"; - phy-mode = "rgmii-rxid"; - phy-handle = <&cpsw3g_phy0>; -}; - -&cpsw_port2 { - status = "disabled"; -}; - -&cpsw3g_mdio { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_mdio1_pins_default>; - - cpsw3g_phy0: ethernet-phy@0 { - reg = <0>; - ti,rx-internal-delay = ; - ti,fifo-depth = ; - ti,min-output-impedance; - }; -}; - -&mcasp1 { - status = "okay"; - #sound-dai-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&main_mcasp1_pins_default>; - - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 1 0 2 0 - 0 0 0 0 - 0 0 0 0 - 0 0 0 0 - >; - tx-num-evt = <32>; - rx-num-evt = <32>; -}; - -&dss { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_dss0_pins_default>; -}; - -&dss_ports { - /* VP2: DPI Output */ - port@1 { - reg = <1>; - - dpi1_out: endpoint { - remote-endpoint = <&sii9022_in>; - }; - }; -}; diff --git a/configs/am62ax_evm_a53_defconfig b/configs/am62ax_evm_a53_defconfig index 6b29a4b9cf..2a71b06310 100644 --- a/configs/am62ax_evm_a53_defconfig +++ b/configs/am62ax_evm_a53_defconfig @@ -8,7 +8,7 @@ CONFIG_SOC_K3_AM62A7=y CONFIG_TARGET_AM62A7_A53_EVM=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000 -CONFIG_DEFAULT_DEVICE_TREE="k3-am62a7-sk" +CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am62a7-sk" CONFIG_SPL_TEXT_BASE=0x80080000 CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y @@ -39,6 +39,7 @@ CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_CMD_MMC=y CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_UPSTREAM=y CONFIG_MULTI_DTB_FIT=y CONFIG_SPL_MULTI_DTB_FIT=y CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y