From: Robert Marko Date: Fri, 3 Jun 2022 10:53:05 +0000 (+0200) Subject: mvebu: uDPU: disable non-present peripherals X-Git-Url: http://git.dujemihanovic.xyz/html/static/gitweb.css?a=commitdiff_plain;h=569b8b8dd8638252a6ecb57a213a0fd898ac20ba;p=u-boot.git mvebu: uDPU: disable non-present peripherals uDPU like eDPU does not expose SCSI based peripherals like SATA nor PCI and for sure it does not have the Intel E1000 PCI card. So, like for eDPU remove those from the defconfig. Signed-off-by: Robert Marko Reviewed-by: Pali Rohár Reviewed-by: Stefan Roese --- diff --git a/configs/uDPU_defconfig b/configs/uDPU_defconfig index 2b2dc16646..505fda4bd3 100644 --- a/configs/uDPU_defconfig +++ b/configs/uDPU_defconfig @@ -12,7 +12,6 @@ CONFIG_DEFAULT_DEVICE_TREE="armada-3720-uDPU" CONFIG_DEBUG_UART_BASE=0xd0012000 CONFIG_SYS_LOAD_ADDR=0x6000000 CONFIG_DEBUG_UART=y -CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 @@ -37,7 +36,6 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_MTD=y -CONFIG_CMD_PCI=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set @@ -53,7 +51,6 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ARP_TIMEOUT=200 CONFIG_NET_RETRY_COUNT=50 CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_AHCI_MVEBU=y CONFIG_LBA48=y CONFIG_SYS_64BIT_LBA=y CONFIG_CLK=y @@ -78,17 +75,15 @@ CONFIG_PHYLIB_10G=y CONFIG_PHY_MARVELL=y CONFIG_PHY_FIXED=y CONFIG_PHY_GIGE=y -CONFIG_E1000=y CONFIG_MVNETA=y CONFIG_MVMDIO=y -CONFIG_PCI=y -CONFIG_PCI_AARDVARK=y CONFIG_PHY=y CONFIG_MVEBU_COMPHY_SUPPORT=y CONFIG_PINCTRL=y CONFIG_PINCTRL_ARMADA_37XX=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +# CONFIG_SCSI is not set CONFIG_MVEBU_A3700_UART=y CONFIG_MVEBU_A3700_SPI=y CONFIG_SYSINFO=y