From: Simon Glass Date: Fri, 4 Aug 2017 22:34:50 +0000 (-0600) Subject: Convert CONFIG_CMD_SPL_WRITE_SIZE to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/html/static/gitweb.css?a=commitdiff_plain;h=3a91a253768a76c734a57dffcbe6ce730b4d2e56;p=u-boot.git Convert CONFIG_CMD_SPL_WRITE_SIZE to Kconfig This converts the following to Kconfig: CONFIG_CMD_SPL_WRITE_SIZE Signed-off-by: Simon Glass Reviewed-by: Bin Meng Reviewed-by: Philipp Tomsich --- diff --git a/cmd/Kconfig b/cmd/Kconfig index 4f7336aeb0..845589d2ff 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -295,6 +295,15 @@ config CMD_SPL_NAND_OFS for full information about how to use this option (and also see board/gateworks/gw_ventana/README for an example). +config CMD_SPL_WRITE_SIZE + hex "Size of argument area" + depends on CMD_SPL + default 0x2000 + help + This provides the size of the command-line argument area in NAND + flash used by Falcon-mode boot. See the documentation until CMD_SPL + for detail. + endmenu menu "Environment commands" diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig index a66d8070c0..afac014304 100644 --- a/configs/am43xx_evm_defconfig +++ b/configs/am43xx_evm_defconfig @@ -17,6 +17,7 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x00100000 +CONFIG_CMD_SPL_WRITE_SIZE=0x40000 # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/am43xx_evm_ethboot_defconfig b/configs/am43xx_evm_ethboot_defconfig index 5679f31c2c..687bec3f0f 100644 --- a/configs/am43xx_evm_ethboot_defconfig +++ b/configs/am43xx_evm_ethboot_defconfig @@ -17,6 +17,7 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x00100000 +CONFIG_CMD_SPL_WRITE_SIZE=0x40000 CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig index 549ec0a020..0717d69fd2 100644 --- a/configs/am43xx_evm_usbhost_boot_defconfig +++ b/configs/am43xx_evm_usbhost_boot_defconfig @@ -21,6 +21,7 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x00100000 +CONFIG_CMD_SPL_WRITE_SIZE=0x40000 CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig index 875c8881f9..f0d6018468 100644 --- a/configs/devkit8000_defconfig +++ b/configs/devkit8000_defconfig @@ -12,6 +12,7 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x680000 +CONFIG_CMD_SPL_WRITE_SIZE=0x400 # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index 3318faee0f..944c0125e8 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -33,6 +33,7 @@ CONFIG_SYS_PROMPT="Ventana > " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_SPL_NAND_OFS=0x1100000 +CONFIG_CMD_SPL_WRITE_SIZE=0x20000 # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig index 7830d90ca2..5b2672c2bf 100644 --- a/configs/gwventana_gw5904_defconfig +++ b/configs/gwventana_gw5904_defconfig @@ -33,6 +33,7 @@ CONFIG_SYS_PROMPT="Ventana > " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_SPL_NAND_OFS=0x1100000 +CONFIG_CMD_SPL_WRITE_SIZE=0x20000 # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index 3b0f42d377..ecbe4e60a6 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -34,6 +34,7 @@ CONFIG_SYS_PROMPT="Ventana > " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_SPL_NAND_OFS=0x1100000 +CONFIG_CMD_SPL_WRITE_SIZE=0x20000 # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y diff --git a/configs/ipam390_defconfig b/configs/ipam390_defconfig index 702b311568..80d9f47a65 100644 --- a/configs/ipam390_defconfig +++ b/configs/ipam390_defconfig @@ -19,6 +19,7 @@ CONFIG_SYS_PROMPT="U-Boot > " # CONFIG_CMD_IMLS is not set CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x00180000 +CONFIG_CMD_SPL_WRITE_SIZE=0x400 CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y # CONFIG_CMD_FLASH is not set diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig index 02e1d6a620..a5e63aa496 100644 --- a/configs/mx6sabresd_defconfig +++ b/configs/mx6sabresd_defconfig @@ -23,6 +23,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_WRITE_SIZE=0x20000 # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_PART=y diff --git a/configs/twister_defconfig b/configs/twister_defconfig index 130806047b..29c183ae44 100644 --- a/configs/twister_defconfig +++ b/configs/twister_defconfig @@ -13,6 +13,7 @@ CONFIG_SYS_PROMPT="twister => " # CONFIG_CMD_IMLS is not set CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x00800000 +CONFIG_CMD_SPL_WRITE_SIZE=0x400 CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index e11527fcff..9c419dee41 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -239,7 +239,6 @@ #endif #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #endif /* !CONFIG_NAND */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 7a811a0a2b..17fc286156 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -308,7 +308,6 @@ /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00300000 /* kernel offset */ -#define CONFIG_CMD_SPL_WRITE_SIZE CONFIG_SYS_NAND_BLOCK_SIZE #endif #define NANDARGS \ "mtdids=" MTDIDS_DEFAULT "\0" \ diff --git a/include/configs/baltos.h b/include/configs/baltos.h index d5413fd071..dbd933f30a 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -46,7 +46,6 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00080000 #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #define NANDARGS \ "mtdids=" MTDIDS_DEFAULT "\0" \ diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index 8acc771e3a..59530beeda 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -396,7 +396,6 @@ DEFAULT_LINUX_BOOT_ENV \ #endif #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #endif /* !CONFIG_NAND */ diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h index 3dbbf67b5c..f965fc9a1d 100644 --- a/include/configs/brppt1.h +++ b/include/configs/brppt1.h @@ -67,7 +67,6 @@ /* NAND */ #ifdef CONFIG_NAND #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x140000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif /* CONFIG_NAND */ #endif /* CONFIG_SPL_OS_BOOT */ diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index 1874cd38e8..0da8774be4 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -138,7 +138,6 @@ #define CONFIG_SYS_NAND_ONFI_DETECTION #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x500000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif /* GPIO pin + bank to pin ID mapping */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 30c165cd77..314c393af3 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -209,7 +209,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000 /* SPL OS boot options */ -#define CONFIG_CMD_SPL_WRITE_SIZE 0x400 /* 1024 byte */ #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 #undef CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 9316a12278..e124bda496 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -210,7 +210,6 @@ /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #endif /* !CONFIG_NAND */ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index d389058573..aeacd46f33 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -13,7 +13,6 @@ /* Falcon Mode */ #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 -#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K) /* Falcon Mode - NAND support: args@17MB kernel@18MB */ #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M) diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index 6adbb8e778..be91dc27cd 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -276,7 +276,6 @@ /* add FALCON boot mode */ #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 #define CONFIG_SYS_SPL_ARGS_ADDR LINUX_BOOT_PARAM_ADDR -#define CONFIG_CMD_SPL_WRITE_SIZE 0x400 /* GPIO support */ #define CONFIG_DA8XX_GPIO diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h index daebf5cba5..03ab812a32 100644 --- a/include/configs/mx6sabreauto.h +++ b/include/configs/mx6sabreauto.h @@ -35,7 +35,6 @@ #define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 -#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K) /* Falcon Mode - MMC support: args@1MB kernel@2MB */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index 9622394c8f..5410881fa1 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -25,7 +25,6 @@ #define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 -#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K) /* Falcon Mode - MMC support: args@1MB kernel@2MB */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index c6839013f2..fe83e71b61 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -277,7 +277,6 @@ /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h index 5f9f8156fd..162fe0f2d3 100644 --- a/include/configs/omap3_cairo.h +++ b/include/configs/omap3_cairo.h @@ -201,7 +201,6 @@ /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif /* env defaults */ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 795538bc88..5490fc945a 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -264,7 +264,6 @@ /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index bfcf790002..473ffc08c7 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -218,7 +218,6 @@ /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index d3c72f30b2..5694cb76c3 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -58,7 +58,6 @@ /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #endif diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index 1c611677b7..f1b8198e18 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -164,7 +164,6 @@ /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif /* diff --git a/include/configs/twister.h b/include/configs/twister.h index 80d480b103..bec402ea9c 100644 --- a/include/configs/twister.h +++ b/include/configs/twister.h @@ -36,7 +36,6 @@ "bootcmd=run nandboot\0" /* SPL OS boot options */ -#define CONFIG_CMD_SPL_WRITE_SIZE 0x400 /* 1024 byte */ #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 #define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100) diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index e570f0ffe4..2b801641c8 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -293,7 +293,6 @@ CONFIG_CM922T_XA10 CONFIG_CMDLINE_EDITING CONFIG_CMDLINE_PS_SUPPORT CONFIG_CMDLINE_TAG -CONFIG_CMD_SPL_WRITE_SIZE CONFIG_CMD_STRINGS CONFIG_CMD_SX151X CONFIG_CMD_TCA642X