From: Andrejs Cainikovs Date: Tue, 12 Dec 2023 12:27:25 +0000 (-0300) Subject: apalis-imx8: add USBH_EN gpio hog X-Git-Url: http://git.dujemihanovic.xyz/html/static/gitweb.css?a=commitdiff_plain;h=32c9dfcc56e61728f4254b9a5765db1c1466f423;p=u-boot.git apalis-imx8: add USBH_EN gpio hog USB host interface is not working on some Apalis Toradex carrier boards with Apalis iMX8 SoM. This is due to USBH_EN pin, which powers USB peripherals, having a strong pull-down on some boards, and a weak pull-down on the others. This USBH_EN pin is left unconfigured, which means it is in its default state at cold boot: input with a strong pull-up. As a result, carrier boards with a weak pull-down have this signal high enough to trigger power delivery to USB peripherals, and opposite - boards with strong pull-down on USBH_EN have this signal below the threshold needed to trigger USB power delivery. This change configures the USBH_EN pin as gpio hog, fixing this issue for all Apalis carrier boards regardless of pull-down resistor value. Also, update apalis-imx8_defconfig via savedefconfig. Signed-off-by: Andrejs Cainikovs Reviewed-by: Fabio Estevam --- diff --git a/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi b/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi index f2d6b183ed..c54a59e89c 100644 --- a/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi +++ b/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi @@ -93,6 +93,12 @@ &gpio4 { bootph-some-ram; + + usbh_en { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + }; }; &gpio5 { diff --git a/configs/apalis-imx8_defconfig b/configs/apalis-imx8_defconfig index 056c1fbacf..d11a31ee64 100644 --- a/configs/apalis-imx8_defconfig +++ b/configs/apalis-imx8_defconfig @@ -65,6 +65,7 @@ CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_ENV=y CONFIG_CLK_IMX8=y CONFIG_CPU=y +CONFIG_GPIO_HOG=y CONFIG_MXC_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_IMX_LPI2C=y