From: Masahiro Yamada Date: Thu, 9 Jul 2020 16:12:07 +0000 (+0900) Subject: serial: uniphier: flush transmitter before changing hardware settings X-Git-Url: http://git.dujemihanovic.xyz/html/static/gitweb.css?a=commitdiff_plain;h=26f7a7deab33e9fb46abec50a5209878fc3b53dc;p=u-boot.git serial: uniphier: flush transmitter before changing hardware settings Ensure the transmitter is empty when chaining the baudrate or any hardware settings. If a character is remaining in the transmitter, the console will be garbled. Signed-off-by: Masahiro Yamada --- diff --git a/drivers/serial/serial_uniphier.c b/drivers/serial/serial_uniphier.c index 2ffab004bd..aaf8657ee1 100644 --- a/drivers/serial/serial_uniphier.c +++ b/drivers/serial/serial_uniphier.c @@ -43,6 +43,10 @@ static int uniphier_serial_setbrg(struct udevice *dev, int baudrate) divisor = DIV_ROUND_CLOSEST(priv->uartclk, mode_x_div * baudrate); + /* flush the trasmitter before changing hw setting */ + while (!(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_TEMT)) + ; + writel(divisor, priv->membase + UNIPHIER_UART_DLR); return 0; @@ -132,6 +136,10 @@ static int uniphier_serial_probe(struct udevice *dev) priv->uartclk = clk_data->clk_rate; + /* flush the trasmitter empty before changing hw setting */ + while (!(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_TEMT)) + ; + tmp = readl(priv->membase + UNIPHIER_UART_LCR_MCR); tmp &= ~UNIPHIER_UART_LCR_MASK; tmp |= FIELD_PREP(UNIPHIER_UART_LCR_MASK, UART_LCR_WLEN8);